Waterputboren - Atlas Copco België

Zoeken naar producten

Informatie aanvragen [-]

Waterputboren

1-10 of 10

  • T2W Water Well Drill

    Water Well Drills

    More features were designed into the T2W than any machine in its class, providing the benefits of larger, more expensive drilling rigs. With its open work area, excellent control of feed speed and exceptional on and off road mobility, the T2W is not only perfectly suited for water well drilling but...

  • T3W Water Well Drill

    Water Well Drills

    For over 100 years, Atlas Copco drills have had a major impact on the drilling community worldwide and have set the standard for quality, longevity, reliability, and performance. The T3W sits right in the middle of the Atlas Copco water well line. A combination of old and new technology on the T3W...

  • T3WDH Water Well Drill

    Water Well Drills

    The T3WDH is designed to handle larger, deeper holes with larger diameter casing than the standard T3W. With 1070/350 on-board air, 70,000 lb (31,751 kg) pullback and a 20 in (508 mm) table opening, this rig offers contractors an expanded application range and all of the proven T3W operating system...

  • T4W Carrier Mounted Water Well Drill

    Water Well Drills

    For over 100 years, Atlas Copco drills have had a major impact on the drilling community worldwide, setting the standards for quality, reliability, longevity, and performance. The T4W continues this legacy with chassis and drill enhancements that raise the benchmark of water well drills in the...

  • TH10 Lightweight Water Well Drill

    Water Well Drills

    Atlas Copco’s TH 10 drill module is a hydraulically operated, mobile water well drill ideally suited for small-to-medium sized projects in remote village well drilling programs or shallow irrigation well drilling. With an external compressor, the TH10 is piped to operate up to 350 psi (24 bar). An...

  • TH10LM Lightweight Water Well Drill

    Water Well Drills

    The Atlas Copco TH10LM (Long Mast) provides the convenience of a longer derrick for handling 20 ft (6.1 m) drill pipe and is ideal for deeper wells where a longer drill pipe saves time and labor. Designed to be mounted on a local 4X4 or 6x4 truck, the unique tower allows this drill module to...

  • TH10LM OBC Lightweight Water Well Drill

    Water Well Drills

    The Atlas Copco TH10LM (Long Mast) OBC (On-board compressor) provides the convenience of a longer derrick for handling 20 ft (6.1 m) drill pipe and is ideal for deeper wells where a longer drill pipe saves time and labor. The on-board compressor of Atlas Copco provides sufficient air to blow out...

  • TH5 Lightweight Water Well Drill

    Water Well Drills

    The Atlas Copco TH5 drill module is a hydraulically operated, mobile, lightweight water well drill ideally suited for projects in tight locations, remote village well drilling programs, or small, shallow irrigation well drilling. The TH5 is suitable for mounting on a lightweight vehicle or trailer...

  • TH60 Water Well Drill

    Water Well Drills

    With up to 600 hp (477 kW) under the hood and 1850 ft-lb (2508 Nm) of torque to the rear wheels, the TH60 moves along at highway speeds, delivering the power to move in mountainous locations without continuously downshifting, as well as ample torque throughout its range of gears on the jobsite. The...

  • TH60DH Water Well Drill

    Water Well Drills

    The TH60DH is a mid-weight, truck-powered, hydraulic tophead drive drill rig. It is designed for water well and other applications requiring air or mud rotary and down hole hammer drilling methods. The drill is suitable for drilling 5 to 12 in (127 to 305 mm) holes but can drill up to 20 in (508 mm)...

1-10 of 10