New Variable Frequency Drive from Atlas Copco boosts raiseboring productivity
Atlas Cocpo Rock Drills has succeeded extremely well in manufacturing high-grade mechanical components for raise drills in Sweden. <BR> The newest product - the medium sized Robbins 73RM-VF now for delivery to Russia is one example. The final assembly has taken place at GIA Industries in Sweden.<BR> - Atlas Copco’s relocation of all mining machinery activities has given us a good platform in building contacts with sub-suppliers in an area in Sweden where the steel and mechanical industries has its origin, says Björn Rosengren, head of Atlas Copco Rock Drills. This competence will also be of great importance in the development of our manufacturing process, and in the strive to be a final assembler from modules of mining equipment.
The 73RM develop raises and shafts in the 1.8 to 3.1 m (6- 10 ft) diameter range.
In May 2001, Atlas Copco Rock Drills AB received a MUSD 5 order from Norilsk Nickel for two new state of the art Robbins 73RM-VF. The order includes a complete package of spare parts, cutter heads, drill pipes and other drilling accessories. These units will increase the existing fleet of Robbins Raise Borers at the mines from 7 to 9 units and will be used mainly for development of ventilation shafts.
Final testing and delivery will take place from the Örebro factory during February 2002. With these two units Atlas Copco has successfully transferred its production of raise drill to Sweden – just as the entire product line, including marketing, design and logistics, where transferred between 1998 and 2000.
The new variable Frequency Drive gives the possibility to govern the rpm of the main motors and consequently the speed of the pilot bit and the reaming head by means of frequency conversion of motor current. This feature will be used for the first time on the two Robbins 73RM-VF raise boring units to be delivered to the Norilsk Nickel poly-metallic mines in Northern Siberia late February this year.
Extreme flexibility to geology:
Variable speed control has so far been achieved by either a hydraulic or DC electrical motor drive. The advantages of the new AC drive, which is a fully so called torque vector controlled drive, is superior efficiency, reliability and reduced operational costs.
The possibility to vary the reamer head speed is particularly beneficial for operation under widely varying conditions, from hard to soft and from solid to fractured rock.
Soft rock requires more torque than hard rock. Using conventional Raise Borers it is difficult to fully utilise the machine’s installed capacity in hard rock, unless the speed can be increased. Also the reaming head speed can readily be adapted to various reaming head diameters. In all, the final outcome is higher productivity and better cutter economy.
Main features are:
the machine and the drill string is automatically protected from over-torque
using full torque at minimum current and low speed gives smooth start-up and stop proceedings at constant torque, reaming is performed in the 0 – 8 rpm range (0 – 50 Hz), and pilot hole drilling in the 0 – 30 rpm range.
At constant power, reaming is performed in the 8 – 16 rpm range (50 – 100 Hz), and drilling in the 30 – 60 rpm range, where the torque drops as the speed increases.
The enclosed graph illustrates the ratios between torque and speed during operation within the constant torque and the constant power zones
The two Robbins 73RM-VF machines are manufactured in Sweden and will now be delivered on site into the Norilsk Mine in Russia after final assembly and test at GIA Industries, Sweden.
Photo no: 201828
The well-known Robbins 73RM raiseboring machine, from Atlas Copco, is now available with a Variable Frequency Drive for regulation of reaming head speed.
Downloading our photos from the Internet:
Go directly to our photo search page: http.www.atlascopco.com/photo
Enter a specific photo number, or the name of a product
Enter search, and follow the instructions beneath the thumbnail pictures.
For direct contact with our photo archive, please contact: firstname.lastname@example.org
or phone: +46 (0)19-270040, fax + 46(0)19-270042