Three new heavy hydraulic breakers with PowerAdapt and optimized power-to-weight ratio
On the occasion of the Bauma 2010 fair Atlas Copco are introducing three new heavy hydraulic breaker models with PowerAdapt and optimized power-to-weight ratio. The HB 2000 with its service weight of 2000 kg offers 10% more power than its predecessor, the HB 200. The new HB 3100 and HB 4700 with a service weight of 3100 and 4700 kg, respectively, deliver 5% and 13% more power than their predecessor models.
All three hydraulic breakers are equipped with the PowerAdapt system which shuts down the breaker in case the oil pressure is too high. „This is for example useful when the hydraulic breaker is used on different carrier units,“ Torsten Treger, Product Line Manager Medium & Heavy Breakers explains. „Hydraulic breakers can generally be hydraulically overloaded if the carrier’s oil pressure has the wrong setting. In order to ensure that our customers can make full use of the equipment in terms of efficiency and power, we have equipped the entire range of heavy-duty hydraulic breakers with PowerAdapt.
With an improper carrier oil pressure setting, conventional pressure relief valves as the ones frequently used in hydraulic breakers continuously drain oil into the tank and therefore waste precious energy. This affects the efficiency and profitability of the equipment.
The improved guide system of the hydraulic breakers provides a better stability and resistance. „After all hydraulic breakers are subject to tough operating conditions,“ Treger adds. „A new retaining bar provides a better protection especially in the lower part of the hydraulic breaker which has to take a lot of wear and tear. The service window and the recesses for the lateral slewing screw couplings have been reinforced. The Non-Dust version of the three new breaker models are furnished with the all-round wear protection which all of the dust versions of the HB series of hydraulic breakers already feature.“
All proven features of Atlas Copco’s heavy-duty hydraulic breaker line are also found in the three new models: the VibroSilenced System to protect operators against noise and vibrations, AutoControl to adapt the blow frequency and impact energy to the rock hardness as well as the integrated automatic lubrication system ContiLube ™ II. With StartSelect the operator can influence the starting and shutdown behaviour of the hydraulic breaker. And with the optional DustProtector the hydraulic breaker is protected against dust and rock particles penetrating the lower breaker part.
|Technical data:||HB 2000||HB 3100||HB 4700|
|Carrier weight class||t||22-38||32-52||45-80|
|Oil flow||l/min||150-190||210 – 270||260-340|
|Operating pressure||bar||160-180||160 – 180||160-180|
|Number of blows||bpm||300-600||280 – 560||280-520|
The photos can be downloaded at www.atlascopco.com/photo, numbers ac0034105.