MIDI Optimizer F/R M/S : 1/2" air preparation unit, filter/regulator - US - Atlas Copco Iraq

Products / Products / Air line Accessories / Air preparation units / 1/2" NPT - MIDI Optimizer US / 1/2" air preparation unit, filter/regulator - US

Product Search

Request information [-]

MIDI Optimizer F/R M/S : 1/2" air preparation unit, filter/regulator - US

9093 0021 15

Industrial Technique - Tools and Assembly Systems

+971 (0)4 704 0111

Send an email

The MIDI Optimizer is suitable for more than 90% of the Atlas Copco tool range and is the best choice for assembly tools, percussive tools, drills, nibblers and grinders up to Turbo. The MIDI Optimizer has a ½” connection thread and the housing and bowl are made of polymer. The bowl has a highly chemical resistant polypropylene insert and is directly screwed to the housing for easy handling. All separate units, mounting brackets, assembly kits and pressure gauges need to be ordered separately. The MIDI Optimizer F/RD and FRD unit are delivered complete with mounting bracket, assembly kit and pressure gauge. Atlas Copco filters are equipped with a cyclone system. Using centrifugal force, this separates out a high percentage of the heavier solid water particles, while the filter ensures that the amount of dirt entering your tool is kept to a minimum. This means longer working cycles for the tools and minimum service time. Atlas Copco regulators ensure optimal flow at the specific flow rates required by Atlas Copco tools, or any other pneumatic tools. The regulator will optimize the performance of your tool, ensure torque accuracy and boost productivity.

Features & benefits

  • 55 l/s max. air flow for combined units
  • Low pressure drop
  • Self-adjusting nano mist lubricator for correct amount of lubrication
  • Possible to refill the lubricator when in use and pressurized
  • The filter reduces water and dirt in the pneumatic components
  • The lubricator prolongs the life of a vane motor up to three times
  • Working temperature -40°F to + 140°F at 145 psi
  • Working temperature for filters +35°F to +140°F at 145 psi
  • 0-232 psi inlet pressure capacity
  • 7-116 psi outlet pressure capacity
  • Standard filter 30 µm to reduce dirt in the components

Atlas Copco Service

The Leader in tool maintenance for industry Atlas Copco service is a proven cost-saver in your production. The savings you can expect from running a service program depend on the type of production you have in your plant. Many factors are taken into consideration, including: Line assembly, work at fixed stations, frequency of tool use, tool types, applications, and work environment.

Repair Service

With today’s high demands on minimizing downtime for our customers, we focus on specialized workshops that can handle quick repairs and complete overhauls in the most cost-efficient way. To do that we keep a large inventory of spare parts in stock, and we have upgraded with factory fixtures and test equipment to increase our efficiency. With all this, plus certified mechanics dedicated to specific tool models, we’ve minimized lead times and improved the quality of each repair. After service all tools are rigorously tested to Atlas Copco specifications.
Read more about Repair Service

Atlas Copco ToolScan

Tool service
Atlas Copco ToolScan™ report informs you of the status of your air tools and air supply at each workstation. The service is carried out by a highly experienced certified technician and covers the following areas:
  • AirScan of the air supply at each workstation.
  • Status and performance check of the tools
  • Other services can be added.
A report informing you of the status of your air supply and tools, including recommendations for improvements. You can then, together with your team, decide the next step without a binding agreement.
Read more about Atlas Copco ToolScan™

Energy Efficiency Audit

A huge amount of energy is wasted due to leaks in compressed air systems. Capacity losses of up to 20% are common in many installations. During an Energy Efficiency Audit Atlas Copco checks the static and dynamic pressure for your air tools on the line. The pressure drop is measured and documented and a visual inspection of the air installation is performed. Based on the information acquired, using the Energy Efficiency Calculator, Atlas Copco recommends the correct installation in terms of air line accessories and various other aspects.

Read more about Energy efficiency Audit

Product views

Safety information

To operate tools safely, always read and follow all Safety Information and Product Instructions. All locally legislated safety rules regarding installation, operation and maintenance must be respected at all times.

Safety Information
Product Instructions

Atlas Copco USA - Eco Design
Eco Design and environmental aspects of product development is nothing new to us. Atlas Copco has a history of developing modular tools with a deep respect for materials and natural resources used in the products. We always strive to maximize the functionality of the product and at the same time minimize the energy consumption to make sure the environmental impact is as low as possible. By developing accurate tools we make sure the customer never has to waste time or energy to re-do an operation. For battery tools we also have the option to connect multiple tools to one controller and thereby decrease the standby energy consumption considerably.

Eco Design is all about minimizing a product's environmental impact during its entire life-cycle, including extraction of raw materials, manufacturing, customer usage and recycling while maximizing the productivity.

Our approach to Eco Design

Eco Design
Within Industrial Technique we approach Eco Design from six different areas. These form the core of the Eco Design review performed in each product development project. This procedure helps define Eco Design targets early in the project.
    We avoid hazardous substances and materials listed on the Atlas Copco Restricted & Prohibited list.
    We use materials and structural features to minimize the product’s weight and invest in strong, durable materials to protect the product.
    We avoid mixing materials since blends inhibit recycling and consider fastening methods to facilitate disassembly.
    We consider how the final product will be used in order to minimize energy and resource consumption in the use phase, in production and during transportation.
    We design with recycling in mind. We promote repair and upgrading, especially for long lasting and system-dependent products. To increase the customer’s awareness regarding the importance of recycling, we are now including Recycling Instructions in the Product Information (PI).
    We prepare for upgrading, maintenance and recycling, through labelling, modularization and information in the product information.
This is how we do Sustainable Productivity in practice!

Industrial Technique - Tools and Assembly Systems

+971 (0)4 704 0111

Send an email