EPP13 C150 HR13: Controlled, pneumatic, hydraulic pulse nutrunner - Atlas Copco Iraq

Product Search

Request information [-]

EPP13 C150 HR13: Controlled, pneumatic, hydraulic pulse nutrunner

8431 0380 71

Industrial Technique - Tools and Assembly Systems

+971 (0)4 704 0111

Send an email

Atlas Copco’s Pulsor C System gives you all the advantages of a controlled impulse tool, plus the intelligence of an electric fastening system. Like all Atlas Copco pulse tools, Pulsor C is fast, powerful, light and compact and generates virtually no reaction force. The controller remembers up to 4,000 tightenings that can be stored and analyzed. This enables you to fine-tune your process and ensure that every tightening in every shift is perfect. If they are not perfect, you can see why.


Features & benefits

  • No missed screws – Pulsor C counts the tightenings and signals “Batch OK”
  • Forget stripped screws – Pulsor C ensures the screw has been tightened correctly
  • No wrong/forgotten parts – Pulsor C signals “NOK” if the wrong screw or part is used
  • Correct torque every time – Pulsor C controls the torque level
  • Good repeatability – get consistent tightening on hard and soft joints
  • Premature trigger-release warning – LEDs warn operator of interrupted tightening
  • Multiple P-set – one tool can perform up to 100 different P-sets. The right torque setting is selected by exchanging sockets, scanning barcodes and more.
  • High-speed tightening – Atlas Copco pulse tools are fast and powerful, helping to boost productivity.
  • Easy to set up and use.
  • Hot swap – you can change the tool or cable without shutting the system down because the tool shut-off is located in the Tool Control Box instead of the tool. No new settings in the tool are needed.

Technical data

Technical Specifications
Bolt sizeM12-M14 mm
Torque range55 - 110 ft lb
Square drive1/2 inch
Free speed5300 r/min
Weight5.7 lb
Length193 mm
CS distance1 5/16 inch
Air consumption under load32 cfm
Rec hose size13 inch
Air inlet thread-
Model typePistol
Shut-offYes
Max working pressure100 psi
Sound standardISO15744
Sound uncertainty3 dB(A)
Sound power98 dB(A)
Sound pressure87 dB(A)
Vibration standardISO28927-2
Vibration value3.8 m/s²
Vibration uncertainty0.9 m/s²

Included accessories with this product

  • Suspension yoke

    Suspension yoke

    4250 1365 00

  • Protective cover

    Protective cover

    For EPP13C

    4250 2990 04

  • Trim valve Kit

    Trim valve Kit

    For North American market this is assembled on tool. All other markets as an Icluded accessory.

    4250 1894 82

Product views


See the product in action

Accessories

  • Suspension yoke

    Suspension yoke

    4250 2720 00

  • Tool cable - Coil, 3 meters

    Tool cable

    Coil, 3 m

    4250 2533 53

  • MultiFlex - Swivelling type, BSP

    MultiFlex

    Swivelling type, BSP

    8202 1350 22

  • Connection kit

    Connection kit

    4250 1854 91

  • Air sensor tuning valve - See, Pulsor manual

    Valve

    See, Pulsor manual

    4080 1340 00

  • Hose kit

    10 m

    8202 1182 15

  • Hose kit

    5 m

    8202 1182 13

  • Tool cable - Spiral, 5 m

    Tool cable

    Spiral, 5 m

    4250 2533 06

  • Tool cable - Spiral, 12 m

    Tool cable

    Spiral, 12 m

    4250 2533 13

  • Tool cable - Straight, 5 m

    Tool cable

    Straight, 5 m

    4250 2533 05

  • Tool cable - Straight, 12 m

    Tool cable

    Straight, 12 m

    4250 2533 12

  • Tool cable - Coil, 5 m

    Tool cable

    Coil, 5 m

    4250 2533 55

  • Tool cable - Coil, 7 m

    Tool cable

    Coil, 7 m

    4250 2533 57

Industrial Technique - Tools and Assembly Systems

+971 (0)4 704 0111

Send an email