LTV19 R15-10: Pneumatic, angle, shuf-off screwdriver - Atlas Copco Iraq

Products / Products / Assembly tools / Pneumatic assembly tools / Pneumatic screwdrivers / Pneumatic, angle, shuf-off screwdriver

Product Search

Request information [-]

LTV19 R15-10: Pneumatic, angle, shuf-off screwdriver

8431 0279 36

Industrial Technique - Tools and Assembly Systems

+971 (0)4 704 0111

Send an email

The LTV19 model is a small and lightweight pneumatic angle screwdriver that can take care of screws and bolts up to 15 Nm. Being able to reach in to all those cramped spaces where you can’t fit a pistol grip tool and at the same time do the job fast and with good accuracy is the key value of this product. This tool will keep you up and running for a long time! Operating the tool is easy; just set the torque and then go! Reverse is easily set by twisting the ring situated at the back end of the tool, just under the start lever. The spring-operated shut-off cltuch keeps the final torque at the right level - time after time.

Features & benefits

  • Slim design of the angle head allows good access in limited spaces and awkward positions.
  • Spiral cut gears give high accuracy.
  • Reversible.
  • RE reporting conversion kit available.
  • 3/8"" square drive.

Technical data

Technical Specifications
Free speed360 r/min
Weight2.4 lb
Length12.17 inch
Angle head height31 mm
Angle head centre to side11 mm
Air consumption at free speed15 cfm
Model typeAngle
Sound standardISO15744
Sound pressure78 dB(A)
Vibration standardISO28927-2
Vibration value<2.5 m/s²
Sound uncertainty3 dB(A)
Max working pressure100 psi
Torque range soft joint54 - 133 in lb

Included accessories with this product

  • Exhaust hose kit - L = 270 mm

    Exhaust hose kit

    L = 270 mm

    4210 2053 00

  • Screwdriver - Cross



    4080 0650 00

  • Suspension yoke

    Suspension yoke

    4210 1810 00


  • Hose nipple - 1/4”

    Hose nipple

    1/4”. For 8mm (5/16”) hose

    9090 1715 00

  • RE-conversion kit

    RE-conversion kit

    4210 4023 90

  • Zero Gravity balancer

    COL 1 02

    8202 0750 19

  • RE-conversion kit

    RE-signal kit

    4210 4023 91

  • Productivity kit

    MIDI Optimizer F/RD EQ08-C10

    8202 0850 00

  • MultiFlex - Swivelling type, BSP


    Swivelling type, BSP

    8202 1350 20

  • Protective cover

    4210 4116 00

Atlas Copco USA - Eco Design
Eco Design and environmental aspects of product development is nothing new to us. Atlas Copco has a history of developing modular tools with a deep respect for materials and natural resources used in the products. We always strive to maximize the functionality of the product and at the same time minimize the energy consumption to make sure the environmental impact is as low as possible. By developing accurate tools we make sure the customer never has to waste time or energy to re-do an operation. For battery tools we also have the option to connect multiple tools to one controller and thereby decrease the standby energy consumption considerably.

Eco Design is all about minimizing a product's environmental impact during its entire life-cycle, including extraction of raw materials, manufacturing, customer usage and recycling while maximizing the productivity.

Our approach to Eco Design

Eco Design
Within Industrial Technique we approach Eco Design from six different areas. These form the core of the Eco Design review performed in each product development project. This procedure helps define Eco Design targets early in the project.
    We avoid hazardous substances and materials listed on the Atlas Copco Restricted & Prohibited list.
    We use materials and structural features to minimize the product’s weight and invest in strong, durable materials to protect the product.
    We avoid mixing materials since blends inhibit recycling and consider fastening methods to facilitate disassembly.
    We consider how the final product will be used in order to minimize energy and resource consumption in the use phase, in production and during transportation.
    We design with recycling in mind. We promote repair and upgrading, especially for long lasting and system-dependent products. To increase the customer’s awareness regarding the importance of recycling, we are now including Recycling Instructions in the Product Information (PI).
    We prepare for upgrading, maintenance and recycling, through labelling, modularization and information in the product information.
This is how we do Sustainable Productivity in practice!

Industrial Technique - Tools and Assembly Systems

+971 (0)4 704 0111

Send an email