Robbins 44RH C Low profile: Raiseboring Machine - Atlas Copco Iraq

Product Search

Request information [-]

Robbins 44RH C Low profile: Raiseboring Machine

Mahmoud Ismail

+971 (04) 704 0111

Send an email

Built on the proven design of our low-profile, lightweight raise drills, the Robbins 44RH C Low profile adds higher torque and thrust to a small diameter raise drill. The 44RH C Low profile is a versatile high-production raise drill for raise requirements in the smaller diameter range


Features & benefits

  • Low profile and light weight raise boring machine
  • The sturdy worktable is available with a manual or a hydraulic wrenching system for fast and reliable pipe threading
  • The entire drive train features a hollow centre, enabling efficient transmission of any flushing media to clear the pilot hole
  • The Robbins raise drills apply to the well established and proven Atlas Copco Rig Control System (RCS) which adds reliability and user friendliness

Technical description



Technical data

Operational data - Derrick
Raise diameter, nominal5 ft
Raise diameter, range3.5 - 6 ft
Raise lenght, nominal1115 ft
Raise lenght maximum2000 ft
Reaming thrust450000 lbs
RPM, pilot0 - 49 rpm
RPM, reaming0 - 16 rpm
RPM, reaming (reduced torque)16 - 25 rpm
Bailing air (@ 7bar/100 psi)459 ft³/min
Bailing, water119 gal/min
Electrical power supply (50/60 Hz)165/190 kW / 221/255 HP
Electrical voltage (50/60 Hz)400-1 000 V
Electrical frequency50 - 60 Hz
Electrical power requirement (50/60 Hz)198/227 kVA
Drill pipe diameter8 inch
Drill pipe diameter optional10 inch
Drill pipe length s/s30 inch
Pilot hole diameter9 inch
Pilot hole optional diameter11 inch
Cooling water (at 25ºC / 77°F inlet temperature)15.8 gal/min
Measurements & weights - Derrick
Height extend128 inch
Height retracted128 inch
Width piploader included102 inch
Depth65 inch
Weight16535 lb
Weight pipeloader included17417 lb
Drill angle (from horizontal)90-60 ºangle
Measurements & weights - Power pack
Length130 inch
Height67 inch
Width63 inch
Weight10362 lb
Performance
Maximum torque, reaming55000 ft-lbs
Maximum torque, break out 70805 ft-lbs
Stroke49 inch
Dimensions
Width63 inch
Traverse rate, fast traverse rate19.4 ft/min
Traverse rate, feed rate9.8 ft/min

Product views


See the product in action

Mahmoud Ismail

+971 (04) 704 0111

Send an email