Simba W6 C-ITH: Long-hole drilling rig - Atlas Copco Jordan

Product Search

Request information [-]

Simba W6 C-ITH: Long-hole drilling rig

Customers' Request

+9611493550

Send an email

Simba W6 C-ITH is a long-hole drilling rig for medium- to large-sized drifts in the 89 to 165 hole range. The rig is capable of ring drilling parallel holes with 3 m spacing upward and downward. It is adapted for a water-driven, in-the-hole hammer using large hole diameters and Atlas Copco Rig Control System, providing a sustainable high-precision solution for long-hole drilling.


Features & benefits

  • Water-driven ITH-hammer for minimized hole deviation.
  • Rod carousel for 35+1 pipes for mechanized drilling up to 63 m.
  • The Simba W6 C-ITH is controlled by the reliable, computerized Rig Control System (RCS), which ensures precision, productivity and also ergonomic relief for the operator.

Technical description



Technical data

Drilling unit
Mechanized drilling Up to 63 m
Drill steel support and break-out tableYes
Rod Handling SystemRHS 35, 35+1 rods
Pipe diameter102 mm
Carrier
EngineDeutz 6-cylinder, TCD 2013 L06, 2V (Tier 3/Stage IIIA)
Power rating175 kW at 2300 rpm
TransmissionHydrodynamic, Clark 24000
Axle, frontDANA Spicer 123/90
Axle, rearDANA Spicer 123/90, ± 8˚ oscillation
Tires 12.00xR24 XZM
Differential lock on front axleAutomatic
Hydrostatic power steering systemYes
All-wheel driveYes
Hydraulic jacks, front2 extendable
Hydraulic jacks, rear2
Service brakes2 separate circuits
Emergency and parking brakesSAHR
Electrical system24 Volt
Batteries2x125 Ah
HornYes
Beacon warning lampYes
Reverse alarmYes
Protective roof, FOPS-approvedYes
Central lubrication systemYes
Fire extinguisherYes
Spirit levelOne for longitudinal and one for sideways
Shelf for drill bits and toolsYes
Exhaust catalyserYes
SilencerYes
Swingable seat for operating and trammingYes
Articulated steering±41˚ steering angle
Torque572 Nm at 1400 rpm
BeaconYes
Tramming speed on flat ground>15 km/h
Tramming speed on incline 1:8>5 km/h
Hand throttleYes
Boot washing kitYes
Manual rig washing kitYes
Rack for spare hammers and pipesYes
Safety beltYes
Tramming lights8x70 W
Illuminated stairs for platformYes
Fuel tank, volume100 l
Control system
Control systemRig Control System, RCS
Electronic control panelAdjustable with color display
Transfer of data and back-up settingsUSB
Drill settings for up to 5 different drill bitsYes
Angle reading instrumentYes
Integrated diagnostic systemYes
Battery for electronic systemYes
Control panel mounted on trolley or under canopyYes
Trolley-mounted control panel with colour display Optional
Dimensions and weight
Width2600 mm
Turning radius, inner4330 mm
Turning radius, outer7985 mm
Ground clearance300 mm
Height tramming3500 mm
Length, tramming12100 mm
Electrical system
Total installed power193 kW
Voltage400-1000 V
Frequency50-60 Hz
Starting methodStar/delta 400-690 V
Overload protection for electric motorsElectronic
Digital volt/amperage meter in electrical cabinetYes
Phase sequence indicatorYes
Earth fault indicatorYes
Battery chargerYes
Transformer8 kVA
Cable reelYes
Limit switch for cable reelYes
Hydraulic system
Smart oil leakage shut-down systemYes
Water cooled oil cooler in stainless steelYes
Rig Alignment Laser, RALYes
Hydraulic pump for rotation, positioning and feedYes
Hydraulic oil tank volume200 - 250 l
Pumps unloaded at startYes
System pressure, max250 bar
Oil filter indicatorYes
Low oil level indicatorYes
Oil temperature gauge on oil tankYes
Filtration16 µm
Hydraulic oilMineral
Positioning system
Stinger backward on feedBSJ 8-200
Feed dump, drilling+45˚ forward, -30˚ backward
Feed extension (with 5' and 6' drill steel)1200 mm
I-frame with pendulum arm±1.5 m
Rotary accuratorBHR 60–2 for 360º ring drilling
Water system
Water booster pumpYes
Water inlet pressure, min2 bar
Water pressure gaugeYes
Capacity, max350 l/min
Filter unit50 µm
Automatic filter surveillance and cleaningYes
Air separator/pulsation damperYes
Recycling systemYes
Water hose reelYes
Rock drill
Drilling methodIn-the-hole hammer
Rock drillWassara W70, W80, W100, W120

Customers' Request

+9611493550

Send an email