ZZZ - LTP51 HR008-13: Product descriptive name - TO BE UPDATED - Atlas Copco Lebanon

Products / Products / Assembly tools / Pneumatic assembly tools / Pneumatic nutrunners / Product descriptive name - TO BE UPDATED

Product Search

Request information [-]

ZZZ - LTP51 HR008-13: Product descriptive name - TO BE UPDATED

8431 0527 15

.


Features & benefits

    Accessories

    • Prevailing modification kit

      4210 2592 80

    • Protective cover

      Protective cover

      Mounting: The protective cover in rubber is mounted on the motor., Purpose: Protect product from scratches. Will also protect tool from surface wear.

      4210 3044 00

    • Multi torque selector

      Multi torque selector

      Mounting: The selector is mounted on the back of the motor housing, Purpose: Enable four different final torque settings on one LTP nutrunner

      4210 2269 95

    • Quick change retainer pin - Quick change

      Quick change retainer pin

      Quick change. For 1/2” Square drive

      4250 1013 00

    • Shut-off override

      Shut-off override

      4210 3545 80

    • Quick change retainer

      Retainer

      1/2’’

      4250 1190 00

    • MultiFlex - Swivelling type, BSP

      MultiFlex

      Swivelling type, BSP

      8202 1350 22

    • MultiFlex connector - Swivelling type, NPT

      MultiFlex connector

      Swivelling type, NPT

      8202 1350 28

    • Hose nipple

      Hose nipple

      9000 0242 00

    • Mounting plater - Flange mount Ø55. Round

      Mounting plater

      Flange mount Ø55. Round. Mounting: Mounted on the front gear splines. Can be welded on to existing tool fixture

      4210 2219 10

    • Zero Gravity balancer

      COL 2 03

      8202 0750 27

    • Reaction bar, square bracket - Steel, center mount 100x50. 100x50x12 mm. Nut 4210 2218 00

      Reaction bar, square bracket

      Steel, center mount 100x50x12 mm. Spline type 3. Nut 4210 2218 00. Mounting: Mounted on front gear splines. Can be welded to fit on existing fixture

      4210 2219 03

    • Productivity kit

      MIDI Optimizer F/RD EQ10-C13

      8202 0850 02

    • Balancer

      RIL 10C

      8202 0704 16

    • Reaction bar, straight - Aluminium. L=500 mm, Max 150Nm

      Reaction bar, straight

      Aluminium. L=500 mm, Max 150Nm

      4210 2219 01

    • Reaction bar, triangular bracket

      Reaction bar, triangular

      Triangular bracket, spline type 3. Steel. 82x80x12 mm. Nut 4210 2218 00 Mounting: Mounted on the front gear splines. Holes for bolt on in tool fixture

      4220 2137 03

    • Reaction bar, S-type - S-type

      Reaction bar, S-type

      S-type. Spline type 3. Mounting: Mounted on the front gear splines. Designed to take reaction on adjacent bolt or material

      4210 4480 03

    • Reaction bar - Steel, L=500mm. 400x29x12 mm. Nut 4210 2218 00

      Reaction bar

      Steel, L=500mm. 400x29x12 mm. Spline type 3. Nut 4210 2218 00. For further information, please see Printed Matter No. 9836 1454 01. Mounting: Mounted on the front gear splines

      4210 2219 80

    • Reaction bar, sliding drive - Sliding 1/2" square drive, CC distance 70-120mm

      Reaction bar, sliding drive

      Sliding 1/2" square drive, CC distance 70-120mm. Mounting: Mounted on the front gear splines. Designed to fit on adjacent bolt with socket

      4210 4481 83

    • Reaction bar. L-type - Aluminium

      Reaction bar. L-type

      Aluminium. Spline type 3. Mounting: Mounted on the front gear splines. Pre bent material, additional bending will change maximal load

      4210 2219 08

    Atlas Copco USA - Eco Design
    Eco Design and environmental aspects of product development is nothing new to us. Atlas Copco has a history of developing modular tools with a deep respect for materials and natural resources used in the products. We always strive to maximize the functionality of the product and at the same time minimize the energy consumption to make sure the environmental impact is as low as possible. By developing accurate tools we make sure the customer never has to waste time or energy to re-do an operation. For battery tools we also have the option to connect multiple tools to one controller and thereby decrease the standby energy consumption considerably.

    Eco Design is all about minimizing a product's environmental impact during its entire life-cycle, including extraction of raw materials, manufacturing, customer usage and recycling while maximizing the productivity.

    Our approach to Eco Design

    Eco Design
    Within Industrial Technique we approach Eco Design from six different areas. These form the core of the Eco Design review performed in each product development project. This procedure helps define Eco Design targets early in the project.
    1. HAZARDOUS SUBSTANCES
      We avoid hazardous substances and materials listed on the Atlas Copco Restricted & Prohibited list.
    2. MATERIALS
      We use materials and structural features to minimize the product’s weight and invest in strong, durable materials to protect the product.
    3. MIX AND MODULARITY
      We avoid mixing materials since blends inhibit recycling and consider fastening methods to facilitate disassembly.
    4. ENERGY
      We consider how the final product will be used in order to minimize energy and resource consumption in the use phase, in production and during transportation.
    5. REUSE AND RECYCLING
      We design with recycling in mind. We promote repair and upgrading, especially for long lasting and system-dependent products. To increase the customer’s awareness regarding the importance of recycling, we are now including Recycling Instructions in the Product Information (PI).
    6. INFORMATION CUSTOMER
      We prepare for upgrading, maintenance and recycling, through labelling, modularization and information in the product information.
    This is how we do Sustainable Productivity in practice!