ZZZ - LTV58 N575-25: Product descriptive name - TO BE UPDATED - Atlas Copco Lebanon

Products / Products / Assembly tools / Pneumatic assembly tools / Pneumatic nutrunners / Product descriptive name - TO BE UPDATED

Product Search

Request information [-]

ZZZ - LTV58 N575-25: Product descriptive name - TO BE UPDATED

8431 0529 34

.


Features & benefits


    Technical data

    Technical Specifications
    Free speed180 r/min
    Weight10.4 kg
    Length686 mm
    Angle head height81 mm
    Angle head centre to side54 mm
    Air consumption at free speed19 l/s
    Recommended hose size10 mm
    Air inlet thread0.5 mm
    Model typeAngle
    Shut-offYes
    ReversibleNo
    Torque range soft joint280 - 575 Nm
    Square drive25.4 mm
    Vibration standardISO28927-2
    Vibration value<2.5 m/s²
    Sound standardISO15744
    Sound pressure78 dB(A)
    Sound uncertainty3 dB(A)
    Bolt sizeM22 mm

    Included accessories with this product

    • Reaction plate, compl.

      Reaction plate, compl.

      4220 1746 80

    • Reaction plate

      Reaction plate

      4220 1746 00

    • Screwdriver - Cross

      Screwdriver

      Cross

      4080 0650 00

    Accessories

    • RE-signal, kit

      RE-signal, kit

      4210 4057 90

    • Suspension yoke - Swiveling

      Suspension yoke

      Swiveling

      4210 3088 87

    • Quick change retainer pin

      Retainer pin

      1" square models

      4210 3524 80

    • Retainer pin, compl. - Quick change

      Quick change retainer pin

      Quick change. For 1” square drive

      4210 3524 82

    • Quick change retainer pin, compl.

      Retainer pin

      For 1” square drive

      4210 3524 81

    • Productivity kit

      MIDI Optimizer F/RD EQ10-T13

      8202 0850 13

    • Zero Gravity balancer

      RIL 30

      8202 0708 04

    • MultiFlex - Swivelling type, BSP

      MultiFlex

      Swivelling type, BSP

      8202 1350 24

    Atlas Copco USA - Eco Design
    Eco Design and environmental aspects of product development is nothing new to us. Atlas Copco has a history of developing modular tools with a deep respect for materials and natural resources used in the products. We always strive to maximize the functionality of the product and at the same time minimize the energy consumption to make sure the environmental impact is as low as possible. By developing accurate tools we make sure the customer never has to waste time or energy to re-do an operation. For battery tools we also have the option to connect multiple tools to one controller and thereby decrease the standby energy consumption considerably.

    Eco Design is all about minimizing a product's environmental impact during its entire life-cycle, including extraction of raw materials, manufacturing, customer usage and recycling while maximizing the productivity.

    Our approach to Eco Design

    Eco Design
    Within Industrial Technique we approach Eco Design from six different areas. These form the core of the Eco Design review performed in each product development project. This procedure helps define Eco Design targets early in the project.
    1. HAZARDOUS SUBSTANCES
      We avoid hazardous substances and materials listed on the Atlas Copco Restricted & Prohibited list.
    2. MATERIALS
      We use materials and structural features to minimize the product’s weight and invest in strong, durable materials to protect the product.
    3. MIX AND MODULARITY
      We avoid mixing materials since blends inhibit recycling and consider fastening methods to facilitate disassembly.
    4. ENERGY
      We consider how the final product will be used in order to minimize energy and resource consumption in the use phase, in production and during transportation.
    5. REUSE AND RECYCLING
      We design with recycling in mind. We promote repair and upgrading, especially for long lasting and system-dependent products. To increase the customer’s awareness regarding the importance of recycling, we are now including Recycling Instructions in the Product Information (PI).
    6. INFORMATION CUSTOMER
      We prepare for upgrading, maintenance and recycling, through labelling, modularization and information in the product information.
    This is how we do Sustainable Productivity in practice!