Simba 364: Long-hole drilling rig - Atlas Copco Lebanon

Product Search

Request information [-]

Simba 364: Long-hole drilling rig

Customers' Request

+961 1 876782

Send an email

Simba 364 is a long-hole drilling rig for small- to medium-sized drifts in the 90 to 165 mm hole range. The rig is capable of ring drilling parallel holes with 1.5 m spacing in the side walls and up to 3 m spacing upward and downward. It is adapted to accommodate high-performance, in-the-hole (ITH) hammers using large hole diameters, providing a sustainable high-precision solution for long-hole drilling.


Features & benefits

  • High torque rotation motor and a high-efficiency hammer for long and straight holes.
  • Rod carousel for 27+1 pipes for mechanized drilling up to 51 m.
  • Line-of-sight remote control for high mobility.

Technical description



Technical data

Air system
Air pressure gaugeYes
2-inch systemYes
Drilling unit
Hole diameter90 - 165 mm
Adaptable to rods/pipes5', 6'
Adaptable to drill tubesTDS 56, TDS 64
Mechanized drilling up to 51 m
Drill steel support and break-out tableYes
Rod Handling SystemRHS 27, 27+1 pipes
Carrier
EngineDeutz 4-cylinder, D914 L04 (Tier 3/Stage IIIA)
Power rating55 kW at 2300 rpm
TransmissionHydrodynamic, Clark 12000
Axle, frontDana 176
Axle, rearDana 176, ± 8˚ oscillation
Tires 12.00xR20
Clearance outside axles15˚
Differential lock on front axleAutomatic
Hydrostatic power steering systemYes
All-wheel driveYes
Hydraulic jacks, front2 extendable
Hydraulic jacks, rear2
Service brakes2 separate circuits
Emergency and parking brakesSAHR
Electrical system24 Volt
Batteries2x70 Ah
HornYes
Beacon warning lampYes
Reverse alarmYes
Brake lightsYes
Protective roof, FOPS-approvedYes
Central lubrication systemYes
Fire extinguisherYes
Spirit levelYes
Exhaust catalyserYes
SilencerYes
Fixed seat for trammingYes
Articulated steering±41˚ steering angle
Torque270 Nm at 1500 rpm
Tramming speed on flat ground>10 km/h
Tramming speed on incline 1:8>4 km/h
Manual rig washing kitOptional
Safety beltYes
Tramming lights8x70 W
Illuminated stairs for platformYes
Fuel tank, volume60 l
Control system
Control systemElectrical Direct System, EDS
Electronic control panelYes
Angle reading instrumentOptional
Battery for electronic systemYes
Control panel mounted on trolley or under canopyYes
Dimensions and weight
Height roof up2960 mm
Width1950 mm
Turning radius, inner2890 mm
Turning radius, outer5440 mm
Ground clearance280 mm
Height tramming3180 mm
Length, tramming8362 mm
Electrical system
Total installed power65 kW
Main motors1x55 kW
Voltage380-1000 V
Frequency50-60 Hz
Starting methodStar/delta (380-690 V)
Overload protection for electric motorsThermal
Digital volt/amperage meter in electrical cabinetYes
Phase sequence indicatorYes
Earth fault indicatorYes
Battery chargerYes
Transformer4 kVA
Cable reelYes
Percussion hour meterYes
Percussion hour meter on A-panelYes
Limit switch for cable reelYes
Working lights mounted on tripod2x200 W, 24 V
Hydraulic system
Water cooled oil cooler in stainless steelYes
Hydraulic pump for rotation, positioning and feedYes
Hydraulic oil tank volume160 l
Pumps unloaded at startYes
System pressure, max250 bar
Oil filter indicatorYes
Low oil level indicatorYes
Oil temperature gauge on oil tankYes
Electrical oil filling pumpYes
Filtration16 µm
Hydraulic oilMineral
Positioning system
Stinger backward on feedBSJ 8-200
Stinger forward on feedBSJ 8-115
Feed dump, drilling+20˚ forward, -65˚ backward
Feed extension (with 4' drill steel)900 mm
Feed extension (with 5' and 6' drill steel)1200 mm
Pendulum armBHP 150 gives 1.5 m feed parallel positioning in the side walls. Adds further 1.5 m feed parallel positioning upwards/downwards.
Rotary accuratorBHR 60–2 for 360º ring drilling
Sliding tableBHT 150 gives 1.5m feed parallel positioning
Water system
Water inlet pressure, min2 bar
Water pressure gaugeYes
Water flow guardYes
Capacity, max50 l/min
Water injection pumpYes
Rock drill
Drilling methodIn-the-hole hammer
Rotation unitDHR 6
Rock drillCOP 34, COP 44, COP 54, COP 64
Hole diameter90 - 178 mm

Product views

Customers' Request

+961 1 876782

Send an email