Boltec EC: Rock bolting rig - Atlas Copco Lebanon

Product Search

Request information [-]

Boltec EC: Rock bolting rig

Customers' Request

+961 1 876782

Send an email

The Boltec EC is a fully mechanized rock bolting rig for bolt lengths from 1.5-6 meters and roof heights up to 13 meters. It is equipped with Atlas Copco’s Rig Control System (RCS) for positioning, drilling and bolting and with the COP 1132 or COP 1435 hydraulic rock drill, specially designed for bolt-hole drilling.


Features & benefits

  • Heavy duty BUT 45 boom for fast positioning, powerful rock drilling and accurate bolting.
  • Sturdy articulated E-carrier with 4-wheel drive and integrated platform for screen handling arm.
  • COP 1132 or the 30 % faster COP 1435 rock drill for a high penetration rate with excellent drill steel economy.

Technical description



Technical data

Air system
Adjustable speedYes
Air pressure gaugeYes
Air receiver80 l
Capacity, max20 l/s at 7 bar
Hydraulic driven axial piston motor10 cc
Boom
BoomBUT 45M
Feed extension, max0 mm
Boom extension, max2500 mm
Feed roll-over360 ˚
Lifting angle, max+65˚/-30˚
Swinging angle, max±35˚
Feed extension 0 - 600 mm
Bolting unit
Bolt length1.5 - 6 m
Bolt typesAdapted for all commonly used bolts on the market, see optional equipment
Bolting unitMechanical Bolt Unit MBU
Chain feedAdapted according to bolt length
Drill steel and couplingAccording to MBU, delivered with rig
Face plates, rectangular, max size150x150 mm
Face plates, round, max size, diameter200 mm
Magazine capacity10 bolts
Carrier
Cabin, FOPS-approved, noise level <80 dB(A)Optional
Cabin, FOPS-approved, noise level <85 dB(A)Optional
Fixed seat for trammingYes
Air conditioning unit, with heating functionOptional
EngineDeutz TCD 4.1L04, (Tier 4i/Stage 3B)
Power rating115 kW at 2300 rpm
Torque609 Nm at 1600 rpm
Articulated steering±38˚ steering angle
All-wheel driveYes
Axle, frontDana/Hurth 114
Axle, rearDana/Hurth 114, ± 8˚ oscillation
Differential lock on front axleAutomatic
Tires 14.00xR24
Hydraulic jacks, front2 extendable
Hydraulic jacks, rear2
Service brakes2 separate circuits
Emergency and parking brakesSAHR
Fuel tank, volume112 l
SilencerYes
Electrical system24 Volt
Batteries2x125 Ah
Hydrostatic power steering systemYes
Exhaust catalyserYes
Brake lightsYes
Tramming lights6x40 W LED, 2x70 W, 24 V DC
Spotlight1x70 W, 24 V
Illuminated stairs for platformYes
Fire extinguisherYes
Central lubrication systemYes
Spirit levelOne for longitudinal and one for sideways
HornYes
BeaconYes
Reverse alarmYes
Shelf for drill bits and toolsYes
Bolt/rod holderYes
BoltrackYes
Dual controls for cable/hose reelYes
Control panel for roof, jacks and cable reelYes
Gradeability at max. load on drive wheels1:4
TransmissionHydrodynamic, Clark 24000
Control system
Control systemRig Control System, RCS
Electronic control panelAdjustable with color display
Transfer of data and back-up settingsUSB
Integrated diagnostic systemYes
Dimensions and weight
Width, without bolt rack2501 mm
Height, standard3098 mm
Length15376 mm
Turning radius, inner4750 mm
Turning radius, outer7500 mm
Electrical system
Total installed power63 kW (auto cement 83 kW)
Main motors1x55 kW (auto cement 1x75 kW)
Voltage690-1000 V
Frequency50-60 Hz
Starting methodStar/delta (1000 V - direct start only)
Transformer8 kVA
Overload protection for electric motorsElectronic
Digital volt/amperage meter in electrical cabinetYes
Phase sequence indicatorYes
Earth fault indicatorYes
Battery chargerYes
Cable reel, diameter1600 mm
Limit switch for cable reelYes
Rain cap(s) for main electrical motor(s)Yes
Earth connectors (EMC grounding straps)Yes
Hydraulic system
Hydraulic pumps1 unit with 4 pumps
Pumps unloaded at startYes
Hydraulic oil tank volume200 - 250 l
Low oil level indicatorYes
Oil temperature gauge on oil tankYes
Electrical oil filling pumpYes
Oil filter indicatorYes
Oil/water cooler in stainless steelYes
Water cooled oilYes
Hydraulic oilMineral
Filtration16 µm
Hydraulic oil thermostatYes
System pressure, max150 - 240 bar
Water system
Water inlet pressure, min2 bar
Water pressure gaugeYes
Water flow guardYes
Water pressure switchYes
Hydraulic drive, axial piston motor5 cc
Hydraulic water booster pumpCR5-13
Capacity, max80 l/min at 7 bar
Rock drill
Rock drillCOP 1132, COP 1435

Product views

You may also be interested in

  • COP 1132

    COP 1132

    Hydraulic rock drill

  • COP 1435

    COP 1435

    Hydraulic rock drill

Customers' Request

+961 1 876782

Send an email