CTE: Closed cooling towers for heat dissipation, 90-1140 kW. - Atlas Copco Liberia

Products / Products / Air and gas treatment / High pressure ancilliaries / Cooling towers/units / Closed cooling towers for heat dissipation, 90-1140 kW.

Product Search

Request information [-]

CTE: Closed cooling towers for heat dissipation, 90-1140 kW.

Atlas Copco’s CTE cooling towers reduce the water temperature of the compressor closed loop circuit to the desired value at the compressor inlet. Cooling occurs through evaporation. The cooling towers, designed for outdoor operation, can operate in ambient temperatures between -40°C/-40°F and +40°C/ +104°F.

Customer benefits

  • Perfect sizing – Sizing is based on wet bulb temperature, corresponding to a higher efficiency. For example, a dry temperature of 30°C/86°F will become 22.5°C/72.5°F at 50% relative humidity.
  • Autonomous operation – A temperature sensor gives the information to a temperature controller which starts and stops the fans.
  • Independent electric supply – CTE cooling towers have an independent electric supply that you can connect to your electricity cubicle or distribution board.
  • High efficiency – The coils feature a patented design which ensures maximum cooling capacity. This reduces the air pressure drop while maximizing tube surface area and increasing heat transfer.
  • High reliability – The coils are manufactured from high-quality steel tubing following the most stringent procedures, and are inserted into a heavy-duty frame. Both frame and coils are hot dip galvanized.
  • Water savings – The extremely efficient drift eliminator system limits the drift rate to less than 0.001% of the recirculating water rate, which saves valuable water and treatment chemicals.
  • Minimum maintenance – Superior air inlet louvers of a 2-pass design minimize splash-out, block out direct sunlight and reduce algae formation inside the coolers, thus substantially reducing water treatment and maintenance costs. In addition, the basin is accessible from four sides, has large openings and can be inspected while the pump is running. The fan motors are accessible from outside the unit for normal maintenance, and no tools are required for belt adjustment. Connection to a water pump skid is recommended.

Technical data

Technical Specifications
Heat exchanged power203.9 - 846.5 kW

Total customer care

Your bottom line, maximum availability of our equipment at minimum total operating cost, is the top priority for all of us at Atlas Copco. Our way of achieving that builds on interaction, on long-term relationships and involvement in your processes, needs and objectives.
Our organization and people are committed to the maximum operational availability and efficiency of your compressed air network. Total customer care is our goal at any level of service interaction with you; from standardized genuine parts over tailormade service plans to remote monitoring and optimization.
We want you to see Atlas Copco as a real performance partner that can contribute to the productivity of your processes. The best way of taking care of your interest is by taking the best care of your equipment.

Save energy

Energy saving
With their detailed and extensive knowledge of compressed air, our energy and air consultant engineers will be able to determine an acceptable operating balance, that is both within the capabilities of your compressors and also adequate to satisfy your production with minimized operational running costs.

Read more about Save energy

Monitor your products

Keeping an eye on your equipment at all times is the best way for Atlas Copco to prevent production loss due to a breakdown. This inside view on your operation allows us to plan for maintenance pro-actively.

Read more about Monitoring

Customer support plans

Customer Support Plan
What you need is a solution to keep your production optimal at all time and preferably at the lowest operating cost. Our specialized advisors will visit your production facilities and assess your specific needs. This allows us to propose the most cost effective Customer Support Plan for your maintenance needs.

Read more about Support Plans

Upgrade your product

Upgrade Products
Our upgrade kits are the result of continuous engineering work to make the latest technology available for your existing equipment range. This will inevitably improve the key performance features such as energy consumption and reliability. Intelligent use and the sustained health of core parts are the basic requirements for the lifelong optimum availability of your equipment.

Read more about Product upgrades

Genuine parts

Genuine parts
Because Atlas Copco genuine parts are built according to the same quality standards as your compressor, you are guaranteed that your production, even after servicing your compressor, will remain at the same high level.

Read more about Genuine parts