EPP19 C400 HR20: Controlled, pneumatic, hydraulic pulse nutrunner - Atlas Copco Liberia

Product Search

Request information [-]

EPP19 C400 HR20: Controlled, pneumatic, hydraulic pulse nutrunner

8431 0380 82

Contact

Send an email

Atlas Copco’s Pulsor C System gives you all the advantages of a controlled impulse tool, plus the intelligence of an electric fastening system. Like all Atlas Copco pulse tools, Pulsor C is fast, powerful, light and compact and generates virtually no reaction force. The controller remembers up to 4,000 tightenings that can be stored and analyzed. This enables you to fine-tune your process and ensure that every tightening in every shift is perfect. If they are not perfect, you can see why.


Features & benefits

  • No missed screws – Pulsor C counts the tightenings and signals “Batch OK”
  • Forget stripped screws – Pulsor C ensures the screw has been tightened correctly
  • No wrong/forgotten parts – Pulsor C signals “NOK” if the wrong screw or part is used
  • Correct torque every time – Pulsor C controls the torque level
  • Good repeatability – get consistent tightening on hard and soft joints
  • Premature trigger-release warning – LEDs warn operator of interrupted tightening
  • Multiple P-set – one tool can perform up to 100 different P-sets. The right torque setting is selected by exchanging sockets, scanning barcodes and more.
  • High-speed tightening – Atlas Copco pulse tools are fast and powerful, helping to boost productivity.
  • Easy to set up and use.
  • Hot swap – you can change the tool or cable without shutting the system down because the tool shut-off is located in the Tool Control Box instead of the tool. No new settings in the tool are needed.

Technical data

Technical Specifications
Bolt sizeM16-M20 mm
Torque range200 - 400 Nm
Square drive19.05 mm
Free speed3300 r/min
Weight4.5 kg
Length217 mm
CS distance44 mm
Air consumption under load23 l/s
Rec hose size330.2 mm
Air inlet thread0.38 mm
Model typePistol
Shut-offYes
Max working pressure7 bar
Sound standardISO15744
Sound uncertainty3 dB(A)
Sound power97 dB(A)
Sound pressure86 dB(A)
Vibration standardISO28927-2
Vibration value5.6 m/s²
Vibration uncertainty1 m/s²

Included accessories with this product

  • Trim valve Kit

    Trim valve Kit

    4250 1894 83

  • Protective cover

    Protective cover

    For EPP19C

    4250 2990 06

  • Suspention yoke

    Suspension yoke

    4250 2229 00

Product views


See the product in action

Accessories

  • Suspension yoke

    Suspension yoke

    4250 2720 00

  • Tool cable - Coil, 3 meters

    Tool cable

    Coil, 3 m

    4250 2533 53

  • Air sensor tuning valve - See, Pulsor manual

    Air sensor tuning valve

    See, Pulsor manual

    4080 1340 01

  • MultiFlex - Swivelling type, BSP

    MultiFlex

    Swivelling type, BSP

    8202 1350 22

  • Hose kit

    10 m

    8202 1182 15

  • Hose kit

    5 m

    8202 1182 13

  • Tool cable - Spiral, 5 m

    Tool cable

    Spiral, 5 m

    4250 2533 06

  • Tool cable - Spiral, 12 m

    Tool cable

    Spiral, 12 m

    4250 2533 13

  • Tool cable - Straight, 5 m

    Tool cable

    Straight, 5 m

    4250 2533 05

  • Tool cable - Straight, 12 m

    Tool cable

    Straight, 12 m

    4250 2533 12

  • Tool cable - Coil, 5 m

    Tool cable

    Coil, 5 m

    4250 2533 55

  • Tool cable - Coil, 7 m

    Tool cable

    Coil, 7 m

    4250 2533 57

Contact

Send an email