XD+: Heat of Compression desiccant dryers, 550 - 3600l/s, 1166 - 7630cfm, 1980 - 12960m³/h - Atlas Copco Libya

Products / Products / Air and gas treatment / Heat of compression desiccant dryers / Heat of Compression desiccant dryers, 550 - 3600l/s, 1166 - 7630cfm, 1980 - 12960m³/h

Product Search

Request information [-]

XD+: Heat of Compression desiccant dryers, 550 - 3600l/s, 1166 - 7630cfm, 1980 - 12960m³/h

Mohamed Aguil

Send an email

Atlas Copco’s XD+ Heat of Compression desiccant air dryers are designed for outstanding industrial performance and a long lifetime of reliable operation. They eliminate moisture completely before it can cause any damage to your compressed air net or production equipment. XD+ dryers use heat of compression for the regeneration of the desiccant, the G variant might use some extra electrical power to increase the performance of the dryers. The XD+ dryers are not consuming any compressed air, not during the heating process and not during the cooling process.

Customer benefits

  • High reliability – XD+ dryers eliminate system failures, production downtime and costly repairs by removing moisture from compressed air with a pressure dewpoint as low as -70°C/-100°F. Up to 30% desiccant overfill and the long lifetime of the desiccant further enhance reliability.
  • Maximum energy savings – XD+ dryers incorporate energy-saving features that cut your carbon footprint. A low pressure drop below 0.5bar/7psi drives down energy costs. Dewpoint sensing and control adapts the energy consumption to the real load of the dryer.
  • Easy installation – Your XD+ dryer is delivered ready for use with heaters (depending on the variant), sensors and the control unit already wired and connected.
  • Advanced control and monitoring – The advanced Elektronikon® control and monitoring system gives clear indication of dryer status, operation cycle and alarms. It includes alarms for low inlet pressure, heater and valve operation, plus limit switches, pressure and temperature sensors.
  • Minimum maintenance – All internal components are easily accessible to facilitate maintenance. The use of high-grade desiccant and high-quality valves extends maintenance intervals beyond three years.
  • Durability - a proven rugged design for the cooler and the switching valves, the most important moving components in the dryer, significantly improves the lifetime of your XD+ dryer.

Technical data

Technical Specifications
Capacity FAD (l/s)550 - 3600 l/s
Capacity FAD (m³/h, cfm)1980 - 12960 m³/h

Total customer care

Your bottom line, maximum availability of our equipment at minimum total operating cost, is the top priority for all of us at Atlas Copco. Our way of achieving that builds on interaction, on long-term relationships and involvement in your processes, needs and objectives.
Our organization and people are committed to the maximum operational availability and efficiency of your compressed air network. Total customer care is our goal at any level of service interaction with you; from standardized genuine parts over tailormade service plans to remote monitoring and optimization.
We want you to see Atlas Copco as a real performance partner that can contribute to the productivity of your processes. The best way of taking care of your interest is by taking the best care of your equipment.

Save energy

Energy saving
With their detailed and extensive knowledge of compressed air, our energy and air consultant engineers will be able to determine an acceptable operating balance, that is both within the capabilities of your compressors and also adequate to satisfy your production with minimized operational running costs.

Read more about Save energy

Monitor your products

Keeping an eye on your equipment at all times is the best way for Atlas Copco to prevent production loss due to a breakdown. This inside view on your operation allows us to plan for maintenance pro-actively.

Read more about Monitoring

Customer support plans

Customer Support Plan
What you need is a solution to keep your production optimal at all time and preferably at the lowest operating cost. Our specialized advisors will visit your production facilities and assess your specific needs. This allows us to propose the most cost effective Customer Support Plan for your maintenance needs.

Read more about Support Plans

Upgrade your product

Upgrade Products
Our upgrade kits are the result of continuous engineering work to make the latest technology available for your existing equipment range. This will inevitably improve the key performance features such as energy consumption and reliability. Intelligent use and the sustained health of core parts are the basic requirements for the lifelong optimum availability of your equipment.

Read more about Product upgrades

Genuine parts

Genuine parts
Because Atlas Copco genuine parts are built according to the same quality standards as your compressor, you are guaranteed that your production, even after servicing your compressor, will remain at the same high level.

Read more about Genuine parts

You may also be interested in

  • ZT160VSDFF with Mark5

    Z 55-900 (VSD)

    Oil-free air- and water-cooled rotary screw compressors, 55-935 kW / 75-1253 hp.

  • ZE 2.jpg

    ZE/ZA (VSD)

    Oil-free rotary screw compressors, 22 - 500 kW/ 30 - 700 hp

  • ES 16


    Central control solution

  • Compressed Air Filter

Download our brochures and leaflets.

Mohamed Aguil

Send an email