MIDI Optimizer F/RD M/S : 3/4" air preparation unit, filter/regulator+lubricator - Atlas Copco Libya

Products / Products / Air line Accessories / Air preparation units / 3/4" BSP - MIDI Optimizer / 3/4" air preparation unit, filter/regulator+lubricator

Product Search

Request information [-]

MIDI Optimizer F/RD M/S : 3/4" air preparation unit, filter/regulator+lubricator

9093 0021 51

Customer Request

+202 46100337/8

Send an email

The MIDI Optimizer is suitable for more than 90% of the Atlas Copco tool range and is the best choice for assembly tools, percussive tools, drills, nibblers and grinders up to Turbo. The MIDI Optimizer has a 3/4” connection thread, and the housing and bowl are made of polymer. The bowl has a highly chemical resistant polypropylene insert and the bowl is directly screwed to the housing for easy handling. All separate units, mounting brackets, assembly kits and pressure gauges need to be ordered separately. The MIDI Optimizer F/RD and FRD unit are delivered complete with mounting bracket, assembly kit and pressure gauge. Atlas Copco filters are equipped with a cyclone system. Using centrifugal force, this separates out a high percentage of the heavier solid water particles, while the filter ensures that the amount of dirt entering your tool is kept to a minimum. This means longer working cycles for the tools and minimum service time. Atlas Copco regulators ensure optimal flow at the specific flow rates required by Atlas Copco tools, or any other pneumatic tools. The regulator will optimize the performance of your tool, ensure torque accuracy and boost productivity. The Optimizer nano-lubricator adjusts automatically to the flow demand and ensures that the right amount of oil is supplied to the motor at all flow rates. This minimizes the lubrication needed. The nano oil mist, with particle size of 200 nm, can be transported by the air stream up to 40 m before the oil particles fall out of the stream. This means there is no oil in the hose and direct lubrication is not necessary.

Features & benefits

  • 55 l/s max. air flow for combined units
  • Low pressure drop
  • Self-adjusting nano mist lubricator for correct amount of lubrication
  • Possible to refill the lubricator when in use and pressurized
  • The filter reduces water and dirt in the pneumatic components
  • The lubricator prolongs the life of a vane motor up to three times
  • Working temperature -40°C to +60°C at 10 bar
  • Working temperature for filters +2°C to +60°C at 10 bar
  • 0-16 bar inlet pressure capacity
  • 0.5-8 bar outlet pressure capacity
  • Standard filter 30 µm to reduce dirt in the components

Product views

Atlas Copco USA - Eco Design
Eco Design and environmental aspects of product development is nothing new to us. Atlas Copco has a history of developing modular tools with a deep respect for materials and natural resources used in the products. We always strive to maximize the functionality of the product and at the same time minimize the energy consumption to make sure the environmental impact is as low as possible. By developing accurate tools we make sure the customer never has to waste time or energy to re-do an operation. For battery tools we also have the option to connect multiple tools to one controller and thereby decrease the standby energy consumption considerably.

Eco Design is all about minimizing a product's environmental impact during its entire life-cycle, including extraction of raw materials, manufacturing, customer usage and recycling while maximizing the productivity.

Our approach to Eco Design

Eco Design
Within Industrial Technique we approach Eco Design from six different areas. These form the core of the Eco Design review performed in each product development project. This procedure helps define Eco Design targets early in the project.
    We avoid hazardous substances and materials listed on the Atlas Copco Restricted & Prohibited list.
    We use materials and structural features to minimize the product’s weight and invest in strong, durable materials to protect the product.
    We avoid mixing materials since blends inhibit recycling and consider fastening methods to facilitate disassembly.
    We consider how the final product will be used in order to minimize energy and resource consumption in the use phase, in production and during transportation.
    We design with recycling in mind. We promote repair and upgrading, especially for long lasting and system-dependent products. To increase the customer’s awareness regarding the importance of recycling, we are now including Recycling Instructions in the Product Information (PI).
    We prepare for upgrading, maintenance and recycling, through labelling, modularization and information in the product information.
This is how we do Sustainable Productivity in practice!

Customer Request

+202 46100337/8

Send an email