Atlas Copco hydraulic breakers and crushers chosen for sensitive demolition project in Brazil
Brazilian demolition specialist Comprex Ltda. was chosen to demolish a bridge connecting important districts in the city of Vitória, in the state of Espirito Santo. Since, for environmental reasons, debris was not permitted to fall into the waterway under the bridge, special arrangements had to be made for the removal of the demolition waste. Atlas Copco hydraulic breakers and CombiCutters were chosen by Comprex to handle the job.
Light structures demolished first
For Comprex the demolition sequence started by removing the light structures, such as the parapet, concrete surfacing, etc. This was done using an Atlas Copco SB 452 hydraulic breaker. After that came the heavier task of removing the concrete layer from the beams and finally the 10 beams themselves.
Two Atlas Copco MB 1700 hydraulic breakers and two CC 1700 CombiCutters, mounted on Volvo EC 210 and CAT 416E carriers, made light work of the heavier tasks. The demolition debris was received in a special boat and transported to a recycling plant.
Ronaldo Zucchi, owner of Comprex: “The MB 1700 and SB 452 hydraulic breakers gave impressive performance on the very hard concrete. The efficient combination of Atlas Copco hydraulic breakers and CombiCutters gave us the confidence to accept the challenge and was a decisive factor for us in winning the contract from the City of Vitória.”
For further information, please contact:
- Anja Kaulbach, Communication & Training Manager
Atlas Copco Construction Tools is a division within Atlas Copco´s Construction Technique business area. It develops, manufactures and markets hydraulic, pneumatic, and petrol-driven equipment for demolition, recycling, compaction, rock drilling and concrete applications. Products are marketed and sold under several brands through a worldwide sales and service organisation. The division is headquartered in Essen, Germany, and has production units in Europe, Africa and Asia.