LTP51 HR0004-38: Product descriptive name - TO BE UPDATED - Atlas Copco Madagascar

Products / Products / Assembly tools / Pneumatic assembly tools / Pneumatic nutrunners / Product descriptive name - TO BE UPDATED

Product Search

Request information [-]

LTP51 HR0004-38: Product descriptive name - TO BE UPDATED

8431 0527 58

Compressors and Generators

+254 20 6605000

Send an email

Technical data

Technical Specifications
Square drive139.7 mm
Min torque at 3 bar1200 Nm
Free speed36 r/min
Weight13.8 kg
Length380 mm
CS distance68 mm
Air consumption at free speed19 l/s
Air inlet thread0.38 mm
Spline type8
Model typePistol
Sound standardISO15744
Sound pressure78 dB(A)
Vibration standardISO28927-2
Vibration value<2.5 m/s²
Torque range at 5 bar1500 - 2200 Nm
Max torque at 6.3 bar3000 Nm
Sound uncertainty3 dB(A)
Bolt sizeM36 mm


  • Exhaust hose

    Exhaust hose

    4210 2201 00

  • Suspension yoke

    Suspension yoke

    4250 1365 00

  • Prevailing modification kit

    4210 2593 80

  • Protective cover

    Protective cover

    Mounting: The protective cover in rubber is mounted on the motor., Purpose: Protect product from scratches. Will also protect tool from surface wear.

    4210 3044 00

  • Conversion kit, compl.

    Conversion kit, compl.

    For fixed revers

    4210 3635 85

  • Multi torque selector

    Multi torque selector

    Mounting: The selector is mounted on the back of the motor housing, Purpose: Enable four different final torque settings on one LTP nutrunner

    4210 2269 95

  • Suspension yoke

    Suspension yoke

    4250 1365 00

  • Suspension yoke, compl. - Swiveling

    Suspension yoke, compl.


    4210 3088 82

  • Shut-off override

    Shut-off override

    4210 3545 80

  • Suspension yoke - Mounting Ø 67mm, Swiveling

    Suspension yoke

    Mounting Ø 67mm, swiveling

    4210 3088 82

  • MultiFlex - Swivelling type, BSP


    Swivelling type, BSP

    8202 1350 22

  • MultiFlex connector - Swivelling type, NPT

    MultiFlex connector

    Swivelling type, NPT

    8202 1350 28

  • Hose nipple

    Hose nipple

    9000 0242 00

  • Zero Gravity balancer

    RIL 30

    8202 0708 04

  • Productivity kit

    MIDI Optimizer F/RD EQ10-C13

    8202 0850 02

  • Reaction bar, square bracket - Steel, 250x160x20 mm, SPL8

    Reaction bar, square bracket

    Steel, 250x160x20 mm, Spline 8. Mounting: Mounted on front gear splines. Can be welded to fit on existing fixture

    4220 1972 91

Atlas Copco USA - Eco Design
Eco Design and environmental aspects of product development is nothing new to us. Atlas Copco has a history of developing modular tools with a deep respect for materials and natural resources used in the products. We always strive to maximize the functionality of the product and at the same time minimize the energy consumption to make sure the environmental impact is as low as possible. By developing accurate tools we make sure the customer never has to waste time or energy to re-do an operation. For battery tools we also have the option to connect multiple tools to one controller and thereby decrease the standby energy consumption considerably.

Eco Design is all about minimizing a product's environmental impact during its entire life-cycle, including extraction of raw materials, manufacturing, customer usage and recycling while maximizing the productivity.

Our approach to Eco Design

Eco Design
Within Industrial Technique we approach Eco Design from six different areas. These form the core of the Eco Design review performed in each product development project. This procedure helps define Eco Design targets early in the project.
    We avoid hazardous substances and materials listed on the Atlas Copco Restricted & Prohibited list.
    We use materials and structural features to minimize the product’s weight and invest in strong, durable materials to protect the product.
    We avoid mixing materials since blends inhibit recycling and consider fastening methods to facilitate disassembly.
    We consider how the final product will be used in order to minimize energy and resource consumption in the use phase, in production and during transportation.
    We design with recycling in mind. We promote repair and upgrading, especially for long lasting and system-dependent products. To increase the customer’s awareness regarding the importance of recycling, we are now including Recycling Instructions in the Product Information (PI).
    We prepare for upgrading, maintenance and recycling, through labelling, modularization and information in the product information.
This is how we do Sustainable Productivity in practice!

Compressors and Generators

+254 20 6605000

Send an email