PFD1500RA-900: Pneumatic Positive Feed Drill - Atlas Copco Mozambique

Pesquisa de produtos

Solicitar informação [-]

PFD1500RA-900: Pneumatic Positive Feed Drill

8441 1500 10

Angelica Coana


Enviar uma mensagem de correio electrónico

Ligações rápidas

PFD 1500 is a Positive Feed Drill in Right Angle shape which is suitable for drilling critical and close tolerance holes of medium to large diameters. This drill is used all around the aircraft but is particularly useful in stacked materials and in assembly of structural parts such as fuselage, wing box, wing box assembly, pylon, landing gear and rudder. It’s approved for use in all materials typically found in aerospace manufacturing such as titanium, CFRP, aluminum and inconel.

Características e vantagens

  • Governed air motor for consistent power under load which significantly reduces cycle time
  • Double needle bearings for both feed- and drive gears ensures outstanding service life
  • The modular concept allows quick setup, configuration and maintenance
  • The overload clutch ensures safe operation
  • The small angle head radius allows the tool to be used also in the most cramped locations around the airplane
  • The integrated air logic controls the tool from one easily accessible button set
  • Low air consumption reduces cost for energy

Dados técnicos

Especificações técnicas
Velocidade livre900 r/min
Peso5.4 kg
Consumo de ar em velocidade livre16 l/s
Distância do centro à parte lateral17.8 mm
Potência máxima1.5 kW
Titânio de capacidade22.2 mm
Carbono de capacidade25.4 mm
Norma sobre ruídoISO 15744
Pressão sonora83 dB(A)
Ruído96 dB(A)
Incerteza de ruído3 dB(A)
Comprimento412 mm
Avanço rápidoNo
Propulsão4000 N
Rosca de entrada de ar0.5 mm
Largura56 mm
Altura139 mm
Tamanho recomendado da mangueira0.62 mm
Consumo de ar à potência máxima35 l/s
ZZZ Capacity Aluminium1 inch
ZZZ- delete Capacity steel22.2 mm

Spare parts lists, Dimensional drawings, Exploded Views, Service Instructions, etc.

Spare parts, Dimensional Drawings, Service Instructions, Industrial tools.
Below you find links to Atlas Copco ServAid application, where you find spare parts list and product instructions and a link to the Dimensional Drawing archive where you can find 2D and 3D drawings in PDF, DXF and IGS format.

Atlas Copco Service

The Leader in tool maintenance for industry Atlas Copco service is a proven cost-saver in your production. The savings you can expect from running a service program depend on the type of production you have in your plant. Many factors are taken into consideration, including: Line assembly, work at fixed stations, frequency of tool use, tool types, applications, and work environment.

Repair Service

With today’s high demands on minimizing downtime for our customers, we focus on specialized workshops that can handle quick repairs and complete overhauls in the most cost-efficient way. To do that we keep a large inventory of spare parts in stock, and we have upgraded with factory fixtures and test equipment to increase our efficiency. With all this, plus certified mechanics dedicated to specific tool models, we’ve minimized lead times and improved the quality of each repair. After service all tools are rigorously tested to Atlas Copco specifications.
Read more about Repair Service

Atlas Copco ToolScan

Tool service
Atlas Copco ToolScan™ report informs you of the status of your air tools and air supply at each workstation. The service is carried out by a highly experienced certified technician and covers the following areas:
  • AirScan of the air supply at each workstation.
  • Status and performance check of the tools
  • Other services can be added.
A report informing you of the status of your air supply and tools, including recommendations for improvements. You can then, together with your team, decide the next step without a binding agreement.
Read more about Atlas Copco ToolScan™

Energy Efficiency Audit

A huge amount of energy is wasted due to leaks in compressed air systems. Capacity losses of up to 20% are common in many installations. During an Energy Efficiency Audit Atlas Copco checks the static and dynamic pressure for your air tools on the line. The pressure drop is measured and documented and a visual inspection of the air installation is performed. Based on the information acquired, using the Energy Efficiency Calculator, Atlas Copco recommends the correct installation in terms of air line accessories and various other aspects.

Read more about Energy efficiency Audit

Preventive Maintenance

Like other machines, Atlas Copco industrial power tools need regular maintenance in order to fulfill their full potential in terms of performance and reliability. Different agreements are available, tailored to your needs. We offer maintenance both on-site or off-site, or a combination.

Read more about Preventive Maintenance

Full Coverage Service

Our Full Coverage option keeps your power tools in top operating condition and gives you a fixed budget for all tool maintenance. Other services can be added. To develop the optimum service program for your specific manufacturing operation, take advantage of our unique ToolScan RCM process.
Full Coverage includes:
  • Repair, including parts
  • Calibration
  • Preventive maintenance program
  • On-site/off-site options
  • Other services can be added
Read more about Full Coverage service

Outsourcing solutions

We have extensive experience of outsourcing solutions and currently have more than 75 on-site workshops. These are examples of the areas we cover:
  • Preventive maintenance, repair and calibration of all
    brands and types of tools.
  • Installation and start-up support.
  • Service management system, including developing Key Performance Indicators.
  • Line and process support.
  • Back-up tool/equipment and spare parts management.
  • Other customer requests.
Read more about Outsourcing Solutions

Angelica Coana


Enviar uma mensagem de correio electrónico