LUM02 PR04-1800-Q : Pneumatic, straight, shut-off screwdriver with push start and button reverse - Atlas Copco Mozambique

Produtos / Produtos / Ferramentas para montagem / Ferramentas pneumáticas para montagem / Chaves de parafusos pneumáticas / Pneumatic, straight, shut-off screwdriver with push start and button reverse

Pesquisa de produtos

Solicitar informação [-]

LUM02 PR04-1800-Q : Pneumatic, straight, shut-off screwdriver with push start and button reverse

8431 0146 12

Angelica Coana


Enviar uma mensagem de correio electrónico

Atlas Copco pneumatic LUM screwdrivers have a fast and accurate shut-off clutch for smooth performance and high quality tightening. They are suitable for joints with demands on torque accuracy, providing accurate tightening time-after-time, independent of variations in joint stiffness.

Características e vantagens

  • Superior ergonomics
    – Small tool for low weight
    – Fast shut-off clutch gives lower reaction torque
  • Compact size for accessibility in cramped spaces
  • Reversible
  • Quick change chuck
  • Lubrication-free
  • Straight screwdrivers should be used with a torque arm for best ergonomics

Dados técnicos

Especificações técnicas
Tipo de modeloRecto
Gama de binário, junta suave0.03 - 0.32 Nm
Velocidade livre1800 r/min
Peso0.17 kg
Comprimento172 mm
Distância CS10 mm
Consumo de ar em velocidade livre2.2 l/s
Tamanho recomendado da mangueira152.4 mm
Rosca de entrada de arM5 mm
Pressão de trabalho máxima7 bar
Norma sobre ruídoISO 15744
Pressão sonora<70 dB(A)
Incerteza de ruído3 dB(A)
Vibração standardISO 28927-2
Valor de vibração<2.5 m/s²

Acessórios incluídos com este produto

  • Adjustment key - Torx T-10

    Adjustment key

    Torx T-10

    4080 0650 01

  • Suspension yoke

    Suspension yoke

    4210 4692 00

  • Hose nippel

    Hose nippel

    4210 4700 00

  • Quick coupling

    Quick coupling

    4210 4701 00

  • Exhaust hose

    Exhaust hose

    4112 1378 00

  • Clutch spring - Green, L=16.7mm

    Clutch spring

    Green, Ø = 1.25, Ø = 12.2, L=16.7mm. For further information, pls see Service instructions

    4210 3061 12

  • Clutch spring - L=16.7mm

    Clutch spring

    Ø = 0.75, Ø = 11.2, L=16.7mm. For further information, pls see Service instructions

    4210 3061 14

Spare parts lists, Dimensional drawings, Exploded Views, Service Instructions, etc.

Spare parts, Dimensional Drawings, Service Instructions, Industrial tools.
Below you find links to Atlas Copco ServAid application, where you find spare parts list and product instructions and a link to the Dimensional Drawing archive where you can find 2D and 3D drawings in PDF, DXF and IGS format.

Atlas Copco Service

The Leader in tool maintenance for industry Atlas Copco service is a proven cost-saver in your production. The savings you can expect from running a service program depend on the type of production you have in your plant. Many factors are taken into consideration, including: Line assembly, work at fixed stations, frequency of tool use, tool types, applications, and work environment.

Repair Service

With today’s high demands on minimizing downtime for our customers, we focus on specialized workshops that can handle quick repairs and complete overhauls in the most cost-efficient way. To do that we keep a large inventory of spare parts in stock, and we have upgraded with factory fixtures and test equipment to increase our efficiency. With all this, plus certified mechanics dedicated to specific tool models, we’ve minimized lead times and improved the quality of each repair. After service all tools are rigorously tested to Atlas Copco specifications.
Read more about Repair Service

Atlas Copco ToolScan

Tool service
Atlas Copco ToolScan™ report informs you of the status of your air tools and air supply at each workstation. The service is carried out by a highly experienced certified technician and covers the following areas:
  • AirScan of the air supply at each workstation.
  • Status and performance check of the tools
  • Other services can be added.
A report informing you of the status of your air supply and tools, including recommendations for improvements. You can then, together with your team, decide the next step without a binding agreement.
Read more about Atlas Copco ToolScan™

Energy Efficiency Audit

A huge amount of energy is wasted due to leaks in compressed air systems. Capacity losses of up to 20% are common in many installations. During an Energy Efficiency Audit Atlas Copco checks the static and dynamic pressure for your air tools on the line. The pressure drop is measured and documented and a visual inspection of the air installation is performed. Based on the information acquired, using the Energy Efficiency Calculator, Atlas Copco recommends the correct installation in terms of air line accessories and various other aspects.

Read more about Energy efficiency Audit

Calibration Service

Calibration in Service Lab
With our network of calibration laboratories we can offer a complete package of calibration services to help you control quality for all assembly tools and measurement equipment in your production.

Read more about Calibration services.

Preventive Maintenance

Like other machines, Atlas Copco industrial power tools need regular maintenance in order to fulfill their full potential in terms of performance and reliability. Different agreements are available, tailored to your needs. We offer maintenance both on-site or off-site, or a combination.

Read more about Preventive Maintenance

Full Coverage Service

Our Full Coverage option keeps your power tools in top operating condition and gives you a fixed budget for all tool maintenance. Other services can be added. To develop the optimum service program for your specific manufacturing operation, take advantage of our unique ToolScan RCM process.
Full Coverage includes:
  • Repair, including parts
  • Calibration
  • Preventive maintenance program
  • On-site/off-site options
  • Other services can be added
Read more about Full Coverage service

Outsourcing solutions

We have extensive experience of outsourcing solutions and currently have more than 75 on-site workshops. These are examples of the areas we cover:
  • Preventive maintenance, repair and calibration of all
    brands and types of tools.
  • Installation and start-up support.
  • Service management system, including developing Key Performance Indicators.
  • Line and process support.
  • Back-up tool/equipment and spare parts management.
  • Other customer requests.
Read more about Outsourcing Solutions


  • Tool stand with bits holder

    Tool stand with bits holder

    4210 4711 00

  • Vacuum adapter


    4210 4706 80

Também lhe poderá interessar

Angelica Coana


Enviar uma mensagem de correio electrónico