EPP15 C250 HR20: Controlled, pneumatic, hydraulic pulse nutrunner - Atlas Copco Mozambique

Pesquisa de produtos

Solicitar informação [-]

EPP15 C250 HR20: Controlled, pneumatic, hydraulic pulse nutrunner

8431 0380 77

Angelica Coana

+25821493885

Enviar uma mensagem de correio electrónico

Ligações rápidas

Atlas Copco’s Pulsor C System gives you all the advantages of a controlled impulse tool, plus the intelligence of an electric fastening system. Like all Atlas Copco pulse tools, Pulsor C is fast, powerful, light and compact and generates virtually no reaction force. The controller remembers up to 4,000 tightenings that can be stored and analyzed. This enables you to fine-tune your process and ensure that every tightening in every shift is perfect. If they are not perfect, you can see why.


Características e vantagens

  • No missed screws – Pulsor C counts the tightenings and signals “Batch OK”
  • Forget stripped screws – Pulsor C ensures the screw has been tightened correctly
  • No wrong/forgotten parts – Pulsor C signals “NOK” if the wrong screw or part is used
  • Correct torque every time – Pulsor C controls the torque level
  • Good repeatability – get consistent tightening on hard and soft joints
  • Premature trigger-release warning – LEDs warn operator of interrupted tightening
  • Multiple P-set – one tool can perform up to 100 different P-sets. The right torque setting is selected by exchanging sockets, scanning barcodes and more.
  • High-speed tightening – Atlas Copco pulse tools are fast and powerful, helping to boost productivity.
  • Easy to set up and use.
  • Hot swap – you can change the tool or cable without shutting the system down because the tool shut-off is located in the Tool Control Box instead of the tool. No new settings in the tool are needed.

Dados técnicos

Especificações técnicas
Tamanho do parafusoM12-M16 mm
Gama de binário125 - 250 Nm
Cabeça quadrada19.05 mm
Velocidade livre4300 r/min
Peso3.3 kg
Comprimento211 mm
Distância CS37 mm
Consumo de ar em carga21 l/s
Tamanho recomendado da mangueira330.2 mm
Rosca de entrada de ar0.38 mm
Tipo de modeloPistola
Corte de funcionamentoYes
Pressão de trabalho máxima7 bar
Norma sobre ruídoISO 15744
Incerteza de ruído3 dB(A)
Ruído101 dB(A)
Pressão sonora88 dB(A)
Vibração standardISO 28927-2
Valor de vibração4.9 m/s²
Incerteza de vibração1.5 m/s²

Acessórios incluídos com este produto

  • Trim valve Kit

    Trim valve Kit

    4250 1894 83

  • Suspention yoke

    Suspension yoke

    4250 2229 00

  • Protective cover

    For EPP15

    4250 2990 05

Vistas do produto


Demonstração do produto

Acessórios

  • Suspension yoke

    Suspension yoke

    4250 2720 00

  • Tool cable - Coil, 3 meters

    Tool cable

    Coil, 3 m

    4250 2533 53

  • Air sensor tuning valve - See, Pulsor manual

    Air sensor tuning valve

    See, Pulsor manual

    4080 1340 01

  • MultiFlex - Swivelling type, BSP

    MultiFlex

    Swivelling type, BSP

    8202 1350 22

  • Hose kit

    10 m

    8202 1182 15

  • Hose kit

    5 m

    8202 1182 13

  • Tool cable - Spiral, 5 m

    Tool cable

    Spiral, 5 m

    4250 2533 06

  • Tool cable - Spiral, 12 m

    Tool cable

    Spiral, 12 m

    4250 2533 13

  • Tool cable - Straight, 5 m

    Tool cable

    Straight, 5 m

    4250 2533 05

  • Tool cable - Straight, 12 m

    Tool cable

    Straight, 12 m

    4250 2533 12

  • Tool cable - Coil, 5 m

    Tool cable

    Coil, 5 m

    4250 2533 55

  • Tool cable - Coil, 7 m

    Tool cable

    Coil, 7 m

    4250 2533 57

Angelica Coana

+25821493885

Enviar uma mensagem de correio electrónico