Product Search

Simba E7 C-ITH: Long-hole drilling rig

Atlas Copco Mining & Rock Excavation

+44 (0) 845 6010001

Send an email

Simba E7 C-ITH is a long-hole drilling rig for medium- to large-sized drifts in the 95 to 178 mm hole range. The rig is capable of ring drilling parallel holes upward and downward with up to 5.9 m spacing. Equipped with a high-performance pneumatic in-the-hole hammer, the Simba E7 C-ITH offers a sustainable high-precision solution for long-hole drilling.


Features & benefits

  • Boom-mounted drilling unit for maximum reach and flexibility
  • Rod carousel for 27+1 rods for mechanized drilling up to 51 m
  • Rig Control System (RCS) for high precision, productivity and ergonomic relief for the operator

Technical description



Technical data

Air system
Minimum air inlet pressure2 bar
Air pressure gaugeYes
Drilling unit
Adaptable to drill rods/pipesTDS 76, TDS 87
Adaptable to rods/pipes5', 6'
Mechanized drilling up to 51 m
Carrier
EngineDeutz TCD 4-cylinder 2013 L04 2 V (Stage III A/EPA Tier 3)
Power rating120 kW at 572 rpm
TransmissionClark 32000
Axle, frontDana 114
Axle, rearDana 114, ± 8˚ oscillation
Tires 14.00xR24
Clearance outside axles16˚ rear, 23˚ front
Differential lock on front axleAutomatic
Hydrostatic power steering systemYes
All-wheel driveYes
Hydraulic jacks, front2 extendable
Hydraulic jacks, rear2
Service brakes2 separate circuits
Emergency and parking brakesSAHR
Fuel tank, volume110 l
Electrical system24 Volt
Batteries2x125 Ah
Tramming lightsLED
Gradeability at max. load on drive wheels1:4
HornYes
Beacon warning lampYes
Reverse alarmYes
Brake lightsYes
Protective roof, FOPS-approvedYes
Swingable operators seat with safety beltYes
Illuminated stairs for platformLED
Central lubrication systemYes
Rig alignment laser RAL 650Yes
Fire extinguisherYes
Spirit levelOne for longitudinal and one for sideways
Shelf for drill bits and toolsYes
Exhaust catalyserYes
SilencerYes
Control system
Control systemRig Control System, RCS
Exposed components are designed and tested according to IP 65Yes
Transfer of data and back-up settingsUSB
Drill settings for up to 5 different drill bitsYes
Angle reading instrumentYes
Dimensions and weight
Height roof up3100 mm
Turning radius, inner4400 mm
Turning radius, outer7300 mm
Ground clearance340 mm
Width2550 mm
Electrical system
Total installed power63 kW
Main motors1x55 kW
Voltage400-1000 V
Frequency50-60 Hz
Starting methodStar/delta
Overload protection for electric motorsElectronic
Digital volt/amperage meter in electrical cabinetYes
Phase sequence indicatorYes
Earth fault indicatorYes
Battery chargerYes
Transformer8 kVA
Working lights, mounted on roofLED
Cable reelYes
Positioning system
Feed extension, max1200 mm
Rotary Accurator for 360º ring drillingYes
Stinger backward on feedBSJ 8-200
Stinger forward on feedBSJ 8-115
Rock drill
Drilling methodIn-the-hole hammer
Rotation unitDHR 6

CMT Parts and Services
Here you can read more about our Parts & Services offer.

Atlas Copco Mining & Rock Excavation

+44 (0) 845 6010001

Send an email

Send to a friend PrintShare
Send to a friend PrintShare