Request information [-]

Lubricants

Engineered to protect

Atlas Copco Compressors LLC

866 546 3588

Send an email

Atlas Copco lubricants are engineered with the exact right selection of additives that interact in just the right proportion to obtain optimal performance. The additives not only support the base lubrication requirements, they also interact in multi processes in the compressor.


The properties of quality

Lubricants
All our efforts are aimed at optimizing the performance of your Atlas Copco compressor for the longest lifetime at the lowest operating cost.

The experts in our laboratories are uniquely skilled in specifying lubricant properties for Atlas Copco compressors to operate optimally in a wide range of settings and conditions, during several thousands of hours.

Atlas Copco lubricants are a unique blend of chemical properties, engineered for optimal performance in their dedicated functions.

Atlas Copco Fluids for screw compressors

Roto-Inject Fluid

Roto-Inject Fluid 5l
Atlas Copco Roto-Inject Fluid is specially formulated to protect your GA-GX rotary screw compressors and neutralize pollution. It guarantees the longest lifetime, trouble free, with constant performance, at the best operating cost.

Years of experience on thousands of types of Atlas Copco equipment have proven Roto-Inject Fluid to match all lubrication demands in varied conditions. It boasts an extended service interval of up to 4 000 hours for operation in a mild environment. This is critical to achieve the best reliability and reduce the service lifetime cost.

Roto-Xtend Duty Fluid

RXD Oil 5l
When your air compressors need to perform at top capacity, only the Atlas Copco lubricant is good enough. That’s why it pays to use Roto-Xtend Duty Fluid. Atlas Copco superior performance long life PAO oil, specifically developed for use in Atlas Copco oil injected screw compressors.

Based on synthetic hydrocarbons and special additives, our engineered
8 000 h lubricant has proven its ability to meet all lubrication demands under widely varying conditions. Roto-Xtend Duty Fluid increases compressor reliability, reduces lifetime operating costs and makes your equipment last longer.

Roto-Food Grade Fluid

Roto-Foodgrade Fluid_20L
Roto-Foodgrade Fluid is a high performance fluid specifically designed for use in oil injected screw compressors operating in the food and beverage and packing industry. National and international regulations specify strict manufacturing standards regarding contamination risk management in this industry.

Our Roto foodgrade is based on a careful blend of synthetic fluids and additives that meet these stringent requirements , allowing for active Critical Control Points management (in an HACCP system) and providing increased customer confidence in the food products' safety.

Atlas Copco Fluids for piston compressors

Piston Fluid

Piston Fluid_5L
Piston compressors pose extreme demands to lubricants: the high compression temperature - possibly exceeding 150°C (300°F) - pressures up to 20 bar, condensation - typically during low cycle load - and dust contamination in installations that are not optimally maintained.

Traditional lubricants cannot cope with these extreme conditions, resulting in fast oil degradation, overheating and potentially irreversible damage and high repair costs. Therefore, high performing lubricants increase the equipment lifetime. The Atlas Copco Piston Fluid has been developed as a high resistance lubricant, withstanding severe conditions, with a long service interval and superior performance.

Considering the low oil content in piston compressors, often less than 2 liters, the economy of lesser quality oils simply is not worth the risk.

HiPER Fluid

HiPER Fluid_20L
HiPER Fluid is a premium quality reciprocating compressor lubricant,
which has been developed for and tested in Atlas Copco’s high pres-
sure reciprocating compressors (product lines Intermech and GreenField)

Applications:
Compressed Natural Gas Compressors
Industrial Gas Compressors

HiPER Fluid meets the most stringent qualification in order to increase
the performance and life time of your investment. The oil is specifically
blended to handle local variations in gas composition.

Automan Fluid

Automan Oil 5l
Automan piston compressors pose extreme demands to lubricants: the high compression temperature, possibly exceeding 150°C (300°F), pressures up to 20 bar, condensation - typically during low cycle load - and dust contamination in installations that are not optimally maintained.

Traditional lubricants cannot cope with these extreme conditions, resulting in fast oil degradation, overheating and potentially irreversible damage and high repair costs. Therefore, high performing lubricants increase the equipment lifetime. The Atlas Copco Automan Fluid has been developed as a high resistance lubricant, withstanding severe conditions, with a long service interval and superior performance.

Considering the low oil content in piston compressors, often less than 2 liters, the economy of lesser quality oils is simply not worth the risk.

Atlas Copco Lubricants

Roto-Z

Roto-Z_5L
Roto-Z is a high quality lubricant, uniquely tailored to the specific requirements of the Atlas Copco Z-compressors. Its special formulation yields top performance and maximum lifetime of all moving parts. Reliability is safeguarded and equipment availability is maximal.

Roto-Z is cost-effective too: drain intervals are doubled in comparison
to conventional lubricants.
Roto-Z incorporates the functional benefits of a preservative mineral
oil, which allows for an extended on-site storage of several months.

Roto-H Plus

Roto H Plus_20L
Roto-H Plus is a unique lubricant, especially created for Atlas Cocpo oil-free centrifugal ZH compressors. The heavy-duty blend provides optimum lubrication of the compressor sleeve bearings. In addition, Roto-H Plus guarantees top performance and maximum durability of all other moving parts. This improved reliability translates into maximum equipment uptime.

It is a highly cost-effective lubricant: drain intervals can extend up to
24 000 hours* with only a 6-monthly oil analysis in between.

* Subject to normal operating conditions.

Roto-M

lubricants roto-m oil
Roto-M is your best safeguard for good hypoid gear lubrication . It is a heavy -duty , high-viscosity blend, formulated specifically for the gear boxes on Atlas Copco MD absorption air dryers.

Roto-M provides the high film strength required in hypoid gear applications. It minimizes wear and tear and guarantees optimum lubrication of the MD worm gear drive , under all operating conditions. Its superior reliability translates into maximum equipment uptime.

Recip Oil

Recip Oil_20l
Recip Oil is a unique lubricant, especially created for Atlas Copco oil-free reciprocating compressors and boosters. The special blend provides optimum lubrication for high pressure applications and guarantees top performance and maximum durability of all moving parts. This improved reliability translates into maximum equipment uptime.

You may also be interested in

  • CTS_3D_parts

    protect your investment

    Filters

  • CTS_3D_service kits

    The parts you need, when you need them

    Maintenance kits

Atlas Copco Compressors LLC

866 546 3588

Send an email

Send to a friend PrintShare
Send to a friend PrintShare