Χρησιμοποιείτε ένα πρόγραμμα περιήγησης που δεν υποστηρίζεται πλέον. Για να συνεχίσετε να επισκέπτεστε τον ιστότοπό μας, επιλέξτε ένα από τα παρακάτω υποστηριζόμενα προγράμματα περιήγησης.
Thanks to the Cobra's patented leaf spring design, the tool floats between the handles. Your hands remain in the same position while you break, and vibrations are kept to a minimum.
Low vibrations and high impact energy mean you can use the tool for longer stretches of time.
With 3 models and a vast range of working tools, there's a Cobra for every job. The Cobra PROe is the heavy-hitter of the family and suitable for breaking tough rock. The Cobra TTe is ideal for tie tamping. And the Cobra Combi is a drill and breaker in one.
The impact energy of a pneumatic or hydraulic breaker, without the hoses, that' the Cobra PROe. Low hand and arm vibrations allow you to break for 3 hours at a go. Also available with fuel-injection (Cobra PROi).
|Width across handles||mm||623||623|
|Vibration and sound||PROe||PROi|
|Vibration level 3 axes (ISO 28927-10)||m/s²||3.3||3.3|
|Sound power level guaranteed (2000/14/EC)||Lw, dB(A)||109||109|
|Sound pressure level (ISO 11203)||Lp, r=1m, dB(A)||97||97|
The Cobra TTe is the tool of choice for railway works, especially tie tamping. It works with a high frequency, ideal to push ballast under the rail ties without pulverization.
|Width across handles||mm||623|
|Vibration and sound|
|Vibration level 3 axes (ISO 28927-10)||m/s²||3,8|
|Sound power level guaranteed (2000/14/EC)||Lw, dB(A)||109|
|Sound pressure level (ISO 11203)||Lp, r=1m, dB(A)||97|
The Cobra Combi is a fully autonomous, powerful drill. With a simple switch it also doubles as an all-round breaker for lighter materials. Working in remote locations? Then the Cobra Combi and its extensive range of working tools are happy to handling almost all jobs like breaking, drilling, cutting, driving and compacting.
|Type||Breaker and drill|
|Width across handles||mm||585|
|Penetration rate w 34 mm drill bit||mm/min||200-300|
|Max drilling depth||m||2|
|Drill rotation speed||rpm||250|
|Vibration and sound|
|Vibration level 3 axes (ISO 28927-10)||m/s²||5,8 (breaking), 9,3 (drilling)|
|Sound power level guaranteed (2000/14/EC)||Lw, dB(A)||108|
|Sound pressure level (ISO 11203)||Lp, r=1m, dB(A)||95|
For full technical data, part numbers and available working tools.