1 to 4 compression stages
Flows up to
Solutions up to (5000 psi)
When we talk about high pressure boosters, we simply mean a compressor which enables you to step up the pressure of the primary feed air compressor. If you require air or nitrogen at any pressure between 69 and 345 bar, Atlas Copco’s high pressure booster with unique inhouse designed pumper block is the most efficient choice. They are designed to be transported to your point of work – no matter how remote the location. Whether you are in rental, service industry or waterwell drilling; this portable booster is the best solution for your needs.
Our boosters further increase pressure ratio of air or nitrogen by approximately factor 2,7 and 2,9 per compression stage (up to 3 stages available). The integrated fuel tank autonomy further improves ease of use.
Finally, the bypass system allows you to connect the primary compressor to the pipeline before activating the booster; allowing you to gradually build up pressure in the target application.
Through the new Xc4004 Smart air controller, the required output pressure can easy be defined with a touch of the button. You determin the pressure, while your application dictates the flow. For example in a drilling application, drilling speed can efficiently be increased, reducing the cost per meter drilled and improving your overall profitability.
In addition, the modular design of our dual stage boosters, allow you to change from dual to single stage, increasing the utilization rate of your investment to fit various requirements.
Our pumperblock design not only efficient and small, it is also easy to maintain. The standard components don’t require special oils and all service points are easily accessible. A booster can be maintained by one service technician without the need for a crane or special tools within 4 hours. In addition centralised drains impact daily ease of use. Finally the bypass system allows for easy cleaning of the pipes before usage to avoid downtime due to particles in the booster. Transportability Our inhouse pumperblock design allows for a unique set-up of all booster components, greatly impacting the footprint of the high pressure booster. Even a 4.4m2 booster can boost gas up to 69 bar. This small footprint limits transportation costs as both the booster and feed air compressor can be combined on one trailer. With the weight as low as 2950 kg, even demanding offshore applications experience no limitations. Standard forklift slots and lifting eyes further improve manouverability once on site.
Our state-of-the art Xc4004 controller is constantly monitoring all vital parameters of the booster. In case of pending failure, the controller will protect your investment by automatically shutting down and thus avoiding damage to core components. It will also indicate when preventive maintenance is required, avoiding unexpected downtime. The controller informs through audible alarms if the temperature of the cylinder valves reaches a certain level, even indicating the specific valve that requires maintenance.
The booster models include B4, B7, B9, B13, B18, SB7, SB18.
From improving versatility to increase the utilization rate of your investment, to minimizing downtime by preventive service announcements and audible alarms; the new Xc4004 Smart air controller changes the process of high pressure boosting.
• A clear 7 inch screen with all key parameters at first glance
• Access to historical data
• Remote controlling
With this controller, your booster is ready for the future.
Learn how the Dynamic Flow Boost principle can improve your drilling efficieny.