Stone Worktop Specialist Increases Production Efficiency Thanks to Atlas Copco VSD+ Compressor

Natural Stone Surfaces, one of the UK’s leading quartz and granite worktop manufacturers, chose Atlas Copco to upgrade its essential compressed air supply and has improved its productivity and saved over £4,750 in annual energy costs as a result.

CNC saw powered by compressed air

CNC saw powered by compressed air

Eamonn Farrelly, director at Natural Stone Surfaces, explains:

“Our commitment to continually improving our growing manufacturing facility put us in a position where we had increased the number of production machines and also amplified the number of hand finishing staff within the plant. One of the major requirements for these additions was a higher volume of compressed air to enable us keep up with demand.”

Eamonn Farrelly, Director at Natural Stone Surfaces

The original air supply was provided by three fixed-speed compressors that were all running continually at full capacity.

“We needed to reduce the cost of running these three compressors and were looking to replace them with a single machine. My first thoughts of choosing a new compressor were to turn to Atlas Copco, as it was a company I was aware of as a leader in the industry.”

Eamonn Farrelly, Director at Natural Stone Surfaces
Cutting saw powered by compressed air

Cutting saw powered by compressed air

The choice of supplier was also influenced by Atlas Copco’s environmental credentials, which echoed those of the company. Natural Stone Surfaces is committed to reducing its carbon footprint, maximising recycling and reducing waste. In addition, the company’s workshop and production machinery utilise recycled water that is cleaned on site.

To determine the optimum compressor solution for the company, Atlas Copco conducted an iiTrak system energy audit to monitor Natural Stones Surfaces’ air demands during one week. The results of the assessment revealed improvements to the existing compressed air network were distinctly possible, and that the company could save over £4,750 in energy costs by opting for a Variable Speed Driven (VSD) compressor.

GA18VSDplus FF full feature air compressor installed at Natural Stone Surfaces

GA18VSDplus FF full feature air compressor installed at Natural Stone Surfaces

As a result, a GA18VSD+FF full feature compressor with an integral refrigerant dryer, together with pipework, ducting and filtration, was installed. The variable speed rotary screw compressor supplies 7 bar high quality air at a rate of 14.7-61 l/s (31.2-131 cfm). This is sufficient to meet Natural Stone Surfaces’ compressed air supply demands, which is essential to power a variety of production equipment. The company’s current factory inventory includes five vacuum lifts: two for manoeuvring slabs of granite, marble and quartz on to saw beds, another for loading and unloading an automatic inline polishing machine, and two for manoeuvring cut pieces of stone and quartz in the hand finishing department. Other applications for compressed air include: a battery of hand polishing tools, CNC cutting saws and inline automated straight edge polishers.


The success of the project was summed up by Eamonn Farrelly:

“From my initial inquiry to the day of installation, I have to say the experience was flawless. The after-sales service and back up has also been impeccable. In addition, we have the benefit of the compressor featuring Atlas Copco’s SMARTLINK remote monitoring system, which notifies us of any maintenance issues. Moreover, as we have grown another 40 per cent in the 10 months since the initial enquiry, we have recently ordered an additional VSD+ compressor. The only difference this time is I didn’t have to shop around; there was only one phone call I needed to make!”

Eamonn Farrelly, Director at Natural Stone Surfaces
Air polishing tool

Air polishing tool

Founded in 2001, Natural Stone Surfaces occupies a 25,000 sq ft. state of the art manufacturing facility in Chapel-en-le-Frith, Derbyshire. It is an enterprise that has made considerable investment in the latest computer controlled CNC technology. This approach allows for a wide range of profiling techniques and finishes to be applied to the company’s versatile output of quartz and granite worktops. Raw materials for its products are sourced from all over the world, then cut and finished by an experienced team of craftsmen. Every item supplied is finely polished, cleaned and sealed prior to dispatch from the factory. This ensures every worktop surface provides customers with maximum satisfaction and enduring quality.

Natural Stone Surfaces’ customer base includes many kitchen studios across the UK and other European countries. The company’s commitment to quality and attention to detail has contributed to its continuing growth over the years. This has resulted from working with some of the industry’s most prestigious kitchen manufacturers and interior designers; all of whom demand an efficient service at a competitive price.

Atlas Copco Ireland is the Ireland sales and service operation of the Atlas Copco Group, providing oil-free and oil injected stationary air compressors, gas and process compressors, turbo expanders, nitrogen generators, air treatment equipment (such as compressed air dryers, coolers, and filters) and air management systems. Atlas Copco Ireland’s sales and distribution network means that specialist compressed air advice and service is always within easy reach. A team of service engineers operates across the country, to ensure maximum running efficiency and minimum downtime at its customers' sites. In addition to industrial compressors, Atlas Copco Ireland also handles the sales and marketing of construction and mining equipment, portable compressors and electric power generators, industrial power tools and assembly systems – all backed up by a nationwide sales, distribution, service and maintenance network. Atlas Copco is a world-leading provider of sustainable productivity solutions. The Group serves customers with innovative compressors, vacuum solutions and air treatment systems, construction and mining equipment, power tools and assembly systems. Atlas Copco develops products and service focused on productivity, energy efficiency, safety and ergonomics. The company was founded in 1873, is based in Stockholm, Sweden, and has a global reach spanning more than 180 countries. In 2014, Atlas Copco had revenues of BSEK 94 (BEUR 10.3) and more than 44 000 employees.


 


For further  information contact:


Nick Henderson on 01582 393120 for editorial information


For product or sales enquiries please contact +353 (0)1 4505978 or +44 2892606400.


For further company information contact Rachel O’Connor on 01 4262700.


Telephone numbers for publication: +353 (0)1 4505978 or +44 2892606400


E-mail address for publication: info.ireland@ie.atlascopco.com


Website address for publication: www.atlascopco.ie


 


 


Audit and optimization VSD+ 2017 Energy Efficiency Product Compressed Air

Share this article with your network