30 October 2025
Industries like construction, manufacturing, mining, and oil & gas use compressed air systems in tough environments. These settings often push machines to their limits. Freezing temperatures, high humidity, dust in the air, and rough terrain can reveal problems in equipment. These issues can cause performance problems, safety risks, and expensive downtime.
14 October 2025
Reliable water access is essential not only for households and industry but also for maintaining green spaces that enhance quality of life for urban residents. Japanese underground construction specialist Sansui Kaihatsu Co., Ltd., based in Miyoshi City, Hiroshima Prefecture and serving customers across Japan, drilled a 250-meter water well in Toyota City, Aichi Prefecture to supply sprinklers for a local golf course — powered by Atlas Copco’s Y35 portable air compressor.
29 September 2025
Addressing the growing demand for efficient and environmentally responsible power, Atlas Copco introduces its EPH series of modular hybrid power generators. Designed as a direct and cost-effective alternative to traditional diesel units, these intelligent systems drastically cut fuel consumption and operational costs while providing dependable energy exactly where and when it's needed
05 September 2025
Let’s face it—fuel is one of the biggest costs in drilling operations. And with prices fluctuating, every litre and ounce saved is money in the bank. The good news? You don’t need to overhaul your entire setup to see a difference. Small changes in how you choose, use, and maintain your portable air compressor can lead to big savings.
20 August 2025
For decades, the hum of diesel generators has been synonymous with off-grid power. From remote construction sites and temporary events to emergency backup systems, these machines have long been the backbone of decentralized energy. However, their limitations—high fuel costs, frequent maintenance, and a significant environmental footprint—are well-documented.
12 August 2025
When it comes to lighting up a jobsite, outdoor event, or emergency scene, it is not just about how bright the light appears—it is about how effectively that light works for the space you are trying to cover. To truly understand what makes a light tower effective, you need to know two key terms: lumens and lux. If these terms sound unfamiliar or you have forgotten what they mean, do not worry—we have got you covered.
04 August 2025
Slope reinforcement is a critical part of safe urban development—especially in mountainous regions like South Korea’s Gyeonggi Province. At a residential construction site in Gwangju, SamBaek Construction is using Atlas Copco’s X28 Stage V portable air compressor to carry out slope reinforcement and seismic retrofitting with greater speed, reliability, and compliance.
08 July 2025
In Basking Ridge, New Jersey, USA, Konkus Corporation is breathing new life into aging infrastructure by replacing a deteriorating bridge deck with a robust new concrete surface. Central to their success is the Atlas Copco XAS 188 portable air compressor, which delivers the reliable power needed for precise and efficient demolition.
01 July 2025
In the world of portable air compressors and industries like construction, mining, and heavy-duty operations, the working conditions are rarely forgiving. From scorching deserts to salty coastal air, mobile air compressors must perform reliably under these harsh conditions. That’s why a truly tough compressor isn’t just built - it’s engineered, tested, and proven to thrive in the toughest conditions.
11 June 2025
Atlas Copco has launched its largest container energy storage system (ESS) available on the market – the ZBC 1000-1200 – which delivers 1MW of power output and 1.2MWh energy capacity from a single unit. The new ZBC 1 MW is built using the same advanced and trusted battery technology as Atlas Copco’s existing range of ESS, to deliver a reliable source of power to keep critical jobs in operation and enable users to reduce emissions by up to 90 percent while saving on costs. It is ideal for demanding applications including construction, mining, events, ports, and emergency power.
03 June 2025
Reliable access to water is essential for agriculture, construction, and development — and it often starts with efficient water well drilling. In the Spanish countryside near Zaragoza, a local drilling company is relying on Atlas Copco’s compact, powerful, and fuel-efficient X-Air+ 750-25 portable air compressor to carry out deep well drilling projects with ease and confidence.
26 May 2025
Dutch companies APK Group CIAG and Ravesteijn Infra & Telecom are leveraging three of Atlas Copco’s battery-powered portable air compressors, the B-Air, to support the installation and maintenance of telecom and data communication networks. By using these low-emission, low-noise portable air compressors for blowing fiber optic cables and conduits, they gain a competitive edge in public contracts by delivering high-performance results while reducing local emissions and noise pollution.
19 May 2025
This latest innovation enhances Atlas Copco’s commitment to offering a complete, integrated portable air solution, combining high-efficiency air dryers with the company’s portfolio of portable compressors, nitrogen generators and high-pressure boosters.
15 May 2025
Smart farming is underpinned by minimised input costs and maximised yields, which can be achieved through adopting simple practices, such as regular cleaning of agricultural equipment. In South Africa, crop farmers are effectively using Atlas Copco’s rugged, compact and versatile U190 PACE compressors for the maintenance of their agricultural equipment.
14 April 2025
To test the limits of a pipeline, you need to trust the machines behind the pressure. On the shores of the Black Sea, Atlas Copco’s portable air solutions prove their strength in one of Romania’s most important infrastructure projects. Atlas Copco’s DrillAir portable air compressors and boosters are designed for demanding environments. With working pressures up to 90 bar, they’re ideal for rigorous pipeline testing and inspection.
19 March 2025
For centuries, the Šítkov Weir, an historic dam altering the flow of the Vltava river, has stood as a silent witness to Prague’s rich evolving history. Now, this 16th-century landmark is undergoing a transformative restoration powered by Atlas Copco’s XAS 88-7 portable air compressor, seamlessly merging heritage preservation with modern engineering.
06 March 2025
Atlas Copco has launched the second generation of solar light towers, the HiLight MS 4 and MS 5, a groundbreaking development in their commitment to providing the market with efficient, safe, and dependable lighting solutions for operators in a wide range of applications from events to oil and gas, construction, and mining.
12 February 2025
In Portugal’s Alentejo region, Solubema Quarry faces some harsh operational challenges. Extreme temperatures and pervasive dust are met with Atlas Copco’s E-Air H250 VSD portable air compressors, prioritising efficiency, reliability and mobility in marble extraction.
31 January 2025
Discover how Atlas Copco mobile air compressors and pneumatic tools have excelled in road construction and mining to drilling and quarrying. Built for extreme conditions, they deliver unmatched durability, reliability, and efficiency for your toughest applications.
30 January 2025
Discover 120 years of Atlas Copco innovation in portable air compressors. From its first internal combustion engine portable air compressor to today’s electric and battery-driven mobile air compressors, explore how we lead the way in performance, reliability, and efficiency.
30 January 2025
Explore five groundbreaking innovations by Atlas Copco that transformed the mobile air compressor industry. From pneumatic tools and portable diesel compressors over a century ago to electric and battery-driven mobile air compressors today, discover the milestones driving performance, efficiency, and reliability.
06 December 2024
Uzman Sondaj, an underground and underwater exploration specialist in Karaman, Turkey, leverages Atlas Copco’s Stage V portable air compressors to achieve high performance, fuel efficiency, and reliability – even in the most demanding drilling environments.
05 December 2024
Atlas Copco’s DrillAir range offers mobile, compact, and efficient solutions for geothermal drilling. Reduce fuel consumption and support the clean energy transition with the innovative X-Air+ 750-25 and X-Air+ 1200-40, designed for deep and shallow drilling applications.
04 December 2024
Discover how Atlas Copco's advanced compressed air technology geothermal drilling efficiency, sustainability, and cost-effectiveness. From high-pressure performance to field-proven reliability, learn how innovative compressors support cleaner energy.
03 December 2024
Imagine a portable air compressor compact enough to fit on a standard trailer yet robust enough to power through the toughest geothermal drilling projects. That’s the X-Air+ 750-25, Atlas Copco’s latest innovation in its DrillAir family. Two recent applications in the UK and France illustrate how this compact powerhouse is redefining drilling standards in vastly different environments.
09 October 2024
With rapid advancements and investments, artificial intelligence is revolutionizing assembly operations. AI is becoming a powerhouse in these operations, and it is vital for companies to embrace it, rather than fear it, to thrive in the competitive industrial landscape.
26 September 2024
A mine in northern Chile has doubled its lithium extraction rate since installing Atlas Copco’s WEDA drainage pumps. Operators at the South American mine wanted to improve their lithium extraction process and turned to Atlas Copco’s distribution partner, TRILE, for expert advice and a reliable solution. In addition to optimising its process, the mine has also reduced its maintenance costs by 60%.
30 August 2024
In a disruptive initiative for the event industry, Atlas Copco and Morillo Energy Rent, with vast experience in delivering energy solutions, have successfully implemented an innovative energy solution based on energy storage systems at the Primavera Sound 2024 (Barcelona) music festival.
18 July 2024
Atlas Copco Power and Flow has launched four new models of WEDA electric submersible pumps in response to increased requirements on dewatering pump wear resistance and autonomous operation.
09 July 2024
The all-new X-Air⁺ 1200-40 aims to set new standards in deep drilling applications, boasting greater efficiency than its predecessor by finishing the job at least 10% quicker by being also more fuel efficient.
05 July 2024
Atlas Copco’s footprint and expertise have improved critical dewatering operations on a strategic infrastructure project in The Philippines. The Dipolog-Dapitan bridge project is one of several development initiatives on the island of Mindanao, intended to boost economic growth in the region. Despite high levels of rainfall, safe working conditions have been maintained and the project has been kept on schedule through the deployment of Atlas Copco dewatering pumps.
29 May 2024
At over 4,000 meters above sea level, Atlas Copco’s portable air compressors are lifting vertical mining operations to new heights; providing the essential toughness, precision and power required for such a high-intensity application.
25 March 2024
Industries worldwide are making a great effort to limit their carbon footprint and reduce their greenhouse gas emissions, and a key factor in this transition is the adoption of renewable energy sources. In today's technologically advanced mining industry, where portable air and power are increasingly crucial, batteries play a key role in enhancing productivity and operational efficiency.
19 March 2024
The new portable nitrogen series redefines nitrogen generation, delivering tailored nitrogen solutions for all tough environments. It promises unparalleled purity, efficiency, and resilience, strengthening Atlas Copco’s position as a full-service provider.
06 March 2024
Skanska is working on the construction of the future E18 highway outside Oslo, Norway. To complete the Strand-Ramstadsletta stretch and to cover the high energy demand required on-site while meeting environmental goals, Skanska relies on a battery-based energy storage system from Atlas Copco for optimized power distribution and consumption.
27 February 2024
Atlas Copco has launched a groundbreaking addition to its portable air compressors DrillAir family: the X-Air⁺ 750-25. This advanced product marks a leap forward in highly productive and efficient portable air solutions.
09 February 2024
Atlas Copco has supplied a QES 60 power generator for the successful installation of the world’s first 16-megawatt offshore wind turbine, in southeast China's Fujian Province. Atlas Copco's partner in the region, Chengdu Shiwei Technology Corporation, delivered this reliable QES power generator to provide the critical power supply needed for the spreader to install the three large turbine blades.
31 January 2024
Think beyond the sticker shock! Discovering the true value in a higher purchase price for your mobile air compressor requires a shift in perspective. It's not just about the upfront cost, but rather when Total Cost of Ownership (TCO) proves to be more economical than cheaper alternatives. Here, we flip the script and debunk the most common misconceptions related to TCO, helping you make more savvy purchase decisions.
18 January 2024
Four Atlas Copco ZBC 250-575 energy storage systems have been touring Spain this summer, enabling Europe's leading music festivals to reduce their carbon footprint. Contractors have been searching for an alternative solution to meet their power needs while also cutting costs and meeting emission regulations.
15 December 2023
Atlas Copco’s ZBC energy storage systems have won the prestigious ‘Environmental Product of The Year’ award in the Association of Manufacturers and suppliers of Power generating Systems (AMPS) Excellence awards.
29 November 2023
Atlas Copco has supplied a reliable ZBP energy storage system (ESS) to efficiently power cranes at a construction site of a hospital in Alentejo, in southern-central Portugal. ACCIONA, the Spanish multinational company managing the project, has used the battery-based storage system to set up a hybrid solution with a power generator to optimize the environmental footprint of the crane’s electric motor, achieving significant fuel, energy and lifecycle savings.
26 October 2023
The Scandinavian Touring Car Championship (STCC) will become the first national racing series in the world to compete with electric touring cars. Key to enabling this transformation are Atlas Copco ZBC battery-based energy storage systems, which will be used to recharge the electric cars.
05 October 2023
Atlas Copco Group, Husqvarna Construction, and Volvo Construction Equipment will team up with the Sweden-US Green Transition Initiative to showcase fully electrified construction of green infrastructure in the US.
13 September 2023
Antwerp Euroterminal, which is based at Belgium’s Port of Antwerp-Bruges (the world’s largest roll-on, roll-off port), is undergoing a vast energy transformation. To operate more sustainably, the terminal is reviewing its power supply infrastructure and energy use.
08 September 2023
You can’t always control the external conditions your portable air compressor will be faced with – but you can make sure it is tough enough for any challenge. Here are seven common tough conditions your air compressor might have to deal with. But fear not, solutions are available.
23 August 2023
In Malta’s biggest harbor, a big electrification project is ongoing to energize cruise liners and cargo ships with clean electric energy instead of diesel fuel. For the intensive underwater works, contractor Pina Dalgıçlık İnşaat San and Trade is using an Atlas Copco handheld breaker and power pack. An ideal fit for the ultra-tough and unusual cable laying project.
17 July 2023
In Norway, innovative solutions are being sought after to enable emission-free operations and, in that context, an Atlas Copco’s ZBC 250-575 energy storage system has been delivering the necessary energy to reline 2,400 meters of pipeline at a residential neighborhood in Kruttverkveien, in the greater Oslo area.
29 May 2023
Electric submersible pumps have a solid history in mining applications. In this article, Bart Duijvelaar, Product Marketing Manager of Submersible Pumps at Atlas Copco Power and Flow, explains how the mining industry should rely on manufacturers that can provide the right solutions to meet the mining challenges.
10 April 2023
Power Systems Incorporated (PSI) Deutz Division, Atlas Copco’s exclusive distributor for WEDA electric submersible pumps in the Philippines, has delivered two units of the recently launched WEDA D95 and six of WEDA D50N to a big player in the national mining industry. These robust and reliable pumps are working at an open pit gold mine in Surigao del Norte, in the island province of Caraga, Philippines, enabling the diversion of ground and runoff water.
30 March 2023
Emission norms are changing operations in the entire construction industry, including quarries. In the journey towards stronger compliance with emission standards, the focus is now way beyond only health and safety regulations for operators. While productivity and efficiency remain the key priorities, the need for a balance with more sustainable solutions is now becoming more of a need than an option.
28 March 2023
Atlas Copco Power Technique and Airlif Compressors & Pumps have collaborated to supply ultra-tough and reliable U110PACE air compressor units for demanding opencast mine projects across Mpumalanga, South Africa.
02 March 2023
One of the most crucial components of any quarrying application is managing water. Whether the water accumulates in the quarry from heavy rainfall, groundwater seepage, or both, it must be removed for the quarry site to continue operations. To keep everyone’s feet and equipment dry, dewatering pumps are used in quarries all around the world.
13 February 2023
The first of its kind in the company’s facilities in Antwerp, the new all-electric production line has cut lead times for deliveries of plug-in portable compressors by 50%, accelerating the wider sustainable transformation.
25 January 2023
For more than 30 years, RJ Webb Commercials has specialized in the complete repair and restoration of vehicles. To prepare any vehicle properly for restoring to its former glory, the Welsh company is conducting shotblasting work to clean, descale and properly prepare the surface for the restoration, ensuring the best possible finish.
19 January 2023
To ensure efficient and safe extraction of the ore, Atlas Copco WEDA submersible pumps deliver under extreme conditions to avoid flooding in Zinkgruvan, one of the oldest undeground mines in Sweden.
06 December 2022
The city of Varberg, Sweden, is changing and the industrial port is being moved. The contractor Svenska dmixab is stabilizing the ground in a sustainable way with the help of the electric driven compressor E-Air H250 VSD, as well as a slag product from cement production.
07 November 2022
One of the most common temporary pump applications is water removal on construction sites. There are many ways to set up the equipment in a pump application, all of them have two vital elements in common. Dewatering pumps downtime can cause severe safety problems and impact the productivity of all contractors on site.
18 October 2022
One vital piece of equipment that can go a long way towards positively contributing to improved sustainability is dewatering pumps. Various factors should be considered, such as reducing downtime, improving serviceability, reducing emissions, legislation, and ensuring the pump is properly sized to operate most efficiently.
16 September 2022
Santiago de Chile, witnessed one of the most anticipated events in the region with the opening of the Metropolitan Santiago. Atlas Copco is honored to be associated with this event center, which is a strong stamp of commitment to the environment and sustainability focus in the Chilean community.
23 August 2022
With the arrival of an E-Air V1100 from Atlas Copco, Brødrene Myhre, one of Norway’s largest drilling companies, is shifting to cost efficient, silent and low-emission electric machines.
09 August 2022
This summer’s record temperatures, droughts and wildfires are underlining the reality of climate change. Construction equipment must switch to electric if we are to play our part in stopping the planet overheating, says Maarten Vermeiren, Product Marketing Manager Sustainability and Digitalization at Atlas Copco Portable Air.
04 August 2022
Kunming Fengjing Mining is a mining company based in the Yunnan province in the west of China. The company has been operating in copper mining for over 15 years at Dongchuan Copper Mine Field.
01 August 2022
A key factor in this transition to low-carbon energy is the adoption of renewable energy sources, and solar energy deserves particular attention. The problem, however, is now to harness that energy and use it effectively. To make sure the maximum amount of energy is captured and used, the only viable option is solar energy storage.
17 June 2022
With over 60 years of experience delivering energy solutions, Morillo Energy Rent aims to be an active player in the crusade against climate change and the energy transition within the temporary power rental sector. To achieve these goals, the Spanish company has recently purchased several ZenergiZe ZBP 45 Energy Storage Systems from Atlas Copco.
15 June 2022
Once completed, the Suki Kinari Hydropower project will deliver a much-needed 3 gigawatts of renewable power to Pakistan’s electrical capacity. And it’s not just the dam that will generate clean energy, contractor CGGC is relying on a fleet of 45 electric Atlas Copco compressors on the 20km of tunnels the project requires.
07 June 2022
In the south-west of Germany, a biomass power plant underwent a planned biannual maintenance shutdown. IB Service, industrial maintenance specialist, used zero carbon electric portable air compressors from Atlas Copco to sustainably drive the plant’s transformation.
27 May 2022
Mark Adams, Sales & Marketing Director at Air Plus, shares his experience with Atlas Copco's range of Energy Storage Systems working in several applications: storing and delivering wind energy, and working in hybrid mode with power generators in construction applications.
17 May 2022
Imagine a fairytale bridge, nested in a spectacular rock formation of a nature reserve in Saxony, Germany. This is the site where Jähnig GmbH Felssicherung handles an extensive rock stabilization project that will ensure visitors’ safety. The company relies on an Atlas Copco electric mobile compressor, which is completely emission-free, quiet, and exactly the right fit for their pneumatic equipment.
05 May 2022
Focusing on how the company is investing in the sustainability of its products for the benefit of customers, the communication campaign promotes the electric E-Air compressor as a ‘silent partner for the toughest conditions’.
18 April 2022
Reliable power is a key factor that affects construction site operational efficiency and, therefore, productivity. Until now, the industry has relied heavily on diesel generators in the past, but Energy Storage Systems (ESS) offer some advantages that play a part in improving construction industry productivity.
12 April 2022
The new range of Energy Storage Systems from Atlas Copco maximizes sustainability for operators by working in hybrid mode with efficient diesel-driven generators. This solution helps them cover power peaks and low loads – extending their lifespan and providing a rapid return on investment (ROI).
10 March 2022
Last year, Atlas Copco Power and Flow launched the WEDA D70, an electric submersible pump with a disruptive hydraulic design that will be progressively implemented in subsequent models. What are the main benefits brought by the innovative high-tech platform?
14 December 2021
Atlas Copco’s Power Technique business area adapts its marketing activities to an increasingly digital world. As a leading industrial brand, it has always focused on a customer-centered approach in its marketing activities. Our interaction has evolved drastically in the past two years; the business area embraces a more digital customer journey.
09 December 2021
Amogh N, mechanical engineer for Matha Overseas, explains how the low maintenance rods are used for drilling holes in the Ilkal pink granite, which is one of the hardest granites in India.
30 November 2021
Atlas Copco Power and Flow division has sold 75 units of its latest user-friendly solar-powered LED light tower, the HiLight S2+, to Dayim Equipment Rental Co in Saudi Arabia and Qatar.
17 November 2021
Boels Rental, one of the most renowned equipment rental companies in Europe, has placed an order at the Portable Air division for more than 600 portable air compressors, both Stage V diesel units, and E-Air VSD electric mobile compressors.
09 November 2021
Four HiLight B5+ light towers illuminated the main sporting stages at the eleventh edition of Extreme Sports Barcelona, celebrated at Forum’s Park. The event’s eleventh edition gathered the best scooter, skate, BMX, and breaking athletes internationally.
23 September 2021
Solar powered light towers are becoming a strong alternative to diesel-driven light towers. The new generation of solar light towers enable users to reduce CO2 emissions while enjoying the functionalities of a traditional model. This allows end-users to take on greener operations and comply with the CO2 emissions and noise regulations.
20 September 2021
Atlas Copco Power Technique Belgium has showcased its ZenergiZe Energy Storage Systems at stand B52 of the Matexpo exhibition in Kortrijk (Belgium). The ground-breaking energy storage system from Atlas Copco has won the third prize of the Matexpo Innovation Award.
19 September 2021
At the heart of Brussels, Belgium, construction company Jan De Nul is building a new subway line and station. A complex project, with underground construction in the middle of a vibrant city. Sustainability is high on Jan De Nul’s agenda so when Atlas Copco gave them the chance to try out an electric mobile compressor with Atlas Copco Energy Storage System, they immediately saw the possibilities.
21 July 2021
Atlas Copco’s HiLight V5+ light towers provide power for the Zojila tunnel project in the Kashmir valley, India. This 14.2 km long road tunnel will be one of the largest in Asia, and will connect Srinagar valley and Leh.
21 June 2021
When Atlas Copco launched their first electric mobile compressor, Arentis, an industrial equipment rental company in the Netherlands, didn’t hesitate to take the compressor into their fleet. Arentis and its customer explain how electrifying their compressor fleet contributes to cleaner and more cost-efficient operation.
18 June 2021
Brazil: that is coffee and carnival. But also natural stone of the highest quality. DAPAZ natural stones is a family-owned company that has been quarrying high-quality granite for over 50 years. Atlas Copco’s compressors are the rock-solid solution DAPAZ needs or its daily operations.
11 June 2021
Two Atlas Copco's QAS 5 Stage V generators and a ZenergiZe energy storage system have been powering a Covid vaccination center in Germany, Impfezentrum Münster. These solution ensured that vaccinations were carried out on time.
27 April 2021
Atlas Copco has introduced ZBC, the latest model in its lithium-ion energy storage system range, called ZenergiZe. It can be used as a standalone source, combined with generators to make a hybrid power solution or renewable sources of energy as well as to create Microgrids. The new ZenergiZe is the ideal solution for demanding applications that require a constant and significant flow of electrical energy.
15 March 2021
When Jasmine Water and Beverages Factory Ltd Co, a large water and beverage factory based 120km west from Riyadh city, needed a reliable and uninterrupted power supply for its 24/7 operations, they turned to Atlas Copco’s partner GCC Olayan for a solution.
03 February 2021
Atlas Copco has extended its Versatility range of mobile compressors with the launch of XAS 188-10 PACE, XAS 188-14 PACE, XAS 288-10 PACE, and XAS 238-14 PACE. With this addition, Atlas Copco’s Versatile range offers operators optimal fuel efficiency and increased productivity. The new models are Stage V compliant and built for harsh environments, such as construction, quarrying, mining, and demolition sites, thanks to Atlas Copco’s Hardhat® canopy.
28 January 2021
The arrival of storm Filomena threatened the Spanish communication system and the power grid. Krill Generadores, a specialist in emergency assistance, provided four portable QAS 5 generators from Atlas Copco to overcome these challenging times.
26 January 2021
Mark Adams, Sales & Marketing Director at Air Plus, shares his experience with the latest TwinPower Stage V solution. At Air Plus headquarters in Zemst, Belgium, Adams explains why their customers have decided to work with Atlas Copco’s QAC TwinPower generators before relying on other options.
05 January 2021
Filip Maes, Fimatec CEO & Owner, shares his experience with the unique TwinPower Stage V solution. At Fimatec premises in Waregem, Belgium, Anja Wiehoff, West Europe Communications Manager at Atlas Copco, and Maes discuss the virtues of the QAC TwinPower generator range.
10 December 2020
Discover the new TwinPower®, two power generators within a 20-foot green package with 1350 kVA of prime power. This innovative solution solves load issues and reduces fuel consumption up to 40% on variable load applications. The TwinPower® is a green solution to power operations, with NOx emissions reduced up to 80%.
18 November 2020
In response to the upcoming regulation, Atlas Copco has upgraded its popular 8 Series of air compressors to meet the most stringent emission norms for construction and road equipment, making it the cleanest range on the market. In addition to greener operation, the compressors now feature innovative new technologies that help cut operating costs and improve productivity, with 25 percent less fuel consumption.
16 November 2020
The DrillAir range provides one of the highest air volumes at one of the highest air pressures available in the portable compressor industry. This also makes these new compressors one of the most energy efficient by having a very low specific fuel consumption for the air delivered.
16 November 2020
Do you run your own equipment rental company and have to decide on which compressor to take in your fleet? Or perhaps you’re often relying on rental equipment to run your own business and you want to know what to look out for. These are 7 questions will help you to choose the next compressor for your rental fleet.
16 November 2020
In the south-west of Germany, a biomass power plant underwent a planned biannual maintenance shutdown. IB Service, an industrial maintenance specialist, used zero carbon E-Airs from Atlas Copco to sustainably drive the plant’s transformation.
12 November 2020
Atlas Copco has developed a new portable compressor solution for the US and Canadian markets. It is ideally suited for the construction industry and features best in class efficiency, easy servicing and an integrated controller. The XAS 188 was designed with input from local customers and is manufactured in the US, making it a perfect match for local conditions.
30 October 2020
The benefits of a longer lifespan and the ability to generate greater and wider illumination while consuming less power are among the main benefits of switching to LED. It may sound like a simple decision, but once a buyer has decided to look at LED, there are a number of factors to bear in mind before buying.
27 October 2020
The new PAC H range pumps for high-pressure applications has been designed to reduce downtime and prolong lifespan, saving operational costs. These centrifugal pumps can reach up to 150 metres in head, with a capacity of up to 1.200m³/h and can handle solids of up to 89mm.
22 September 2020
The new light tower from Atlas Copco offers low operational costs and reduced noise levels while increasing illumination coverage. The HiLight H6+ is ideal to use in tough environments, such as applications in construction, mining, events, and rental, thanks to Atlas Copco’s innovative HardHat® body.
22 September 2020
Learn all about the latest addition to the HiLight towers family, the new HiLight H6+. This new light tower offers low operational costs and reduced noise levels while increasing illumination coverage. Resistant to corrosion, it features a new generation of LED floodlights that can cover up to 6.000 m².
17 September 2020
When Raylex, a specialist in highly complex turnkey projects in the electricity, telecommunications, governmental, and mining sectors, needed to create an autonomous radio communications system as part of its hydroelectric project, it turned to Atlas Copco Power and Flow for a solution.
12 September 2020
Discover the new ZenergiZe, your clean and quiet source of energy. This battery-driven energy storage system helps operators to reduce fuel consumption and CO2 emissions, while delivering optimal performance with zero noise and virtually no maintenance. Watch the event and discover all its applications!
08 September 2020
Atlas Copco has launched ZenergiZe, a new range of lithium-ion energy storage systems that can be used as a standalone solution or combined with generators to create a hybrid power solution. ZenergiZe delivers zero CO2 emissions, zero noise, and have virtually zero maintenance needs, enabling operators to minimize environmental impact while benefiting from a low cost of ownership.
28 May 2020
Exclusivas Rodriguez Espinosa SL, a rental company in Spain, selected Atlas Copco’s 8 series compressor range for it’s reliability, serviceability, and unique features like the HardHat canopy. A compressor, packed with extra’s; all under 750 kg.
25 May 2020
Construction Group AVAX SA has selected HiLight H5+ light towers from Atlas Copco for use on the prestigious gas interconnector Greece-Bulgaria (ICGB) construction project. These low-fuel consumption light towers are providing excellent luminosity, which is essential to ensuring workers have good visibility and can continue their operations efficiently both day and night.
25 May 2020
To combat unseasonably low snow cover and to maintain optimal slope conditions, Ski Portillo in Chile now has five times more snowmaking capacity thanks to the installation of four Atlas Copco QAS generators powering 25 snow cannons.
29 April 2020
J. Murphy and Sons Ltd ordered 6 XAS 88 compressors with an integrated generator. They wished to upgrade their compressor fleet with more efficient models and the new 8 series range was a perfect fit. The small footprint, 3 layer anti-corrosion protection (C3) and easy service in under one hour; the XAS 88 packs many features that boost productivity!
10 March 2020
The scenario left by the flooding and mudslides was devastating caused by ‘Fenonemo del Niño’ in the Peruvian coast. The emergency asked for a quick response and Atlas Copco replied with technology, technical knowledge and enthusiastic solidarity from their workers.
23 July 2019
It was Atlas Copco’s dealer, Redstar, who enrolled with Atlas Copco’s newest electric mobile compressor, which features a very energy-efficient permanent magnet motor and ruggedized design. With the award, the world of rental companies embraces an electric mobile compressor as innovative solution for the industry.
24 May 2019
Atlas Copco is set to launch the new Smart Air Xc4004 controller on all its large and specialty air compressors with flows from 20 to 128 m3/min (700 to 4500 cfm) and pressures up to 345 bar (5000 psi).
27 March 2019
At BAUMA 2019 Atlas Copco is set to unveil new sustainable portable air, power and flow equipment that reduces operational expenditure through enhanced clean drive technology, connectivity and versatility.
29 January 2019
Atlas Copco Power and Flow has completed its portfolio of WEDA electric submersible dewatering pumps. They have achieved this comprehensive coverage by completing the ranges for drainage and sludge applications and adding a completely new range for slurry applications. Selection from the entire, expanded range is simplified as all models are classified by application and type of fluid that they handle.
08 May 2018
Every autumn thousands of people visit the BAPS Shri Swaminarayan Mandir (Neasden temple) in London to celebrate Diwali, the Hindu ‘Festival of Light’. This year the festival organisers chose Atlas Copco’s LED HiLight towers to light up the walkways, pavements and areas around the temple.
16 April 2018
The leadership team of the Atlas Copco Power Technique business area has presented a strategic vision outlining how mega-trends such as digitalisation and the construction of smart cities will be powered by cleaner and more connected energy source technologies.
28 November 2017
Atlas Copco has combined its PACE technology with the legendary HardHat polyethylene canopy on the updated XATS 138 single-axle portable compressor. The new design offers construction contractors and rental fleet operators a compelling mix of toughness of versatility.
23 January 2020
Any type of diesel power generator can be paralleled together with another type as long as their frequencies and voltage are the same at the point of interconnection. Connecting generators in parallel increases the power capacity, control in load management, ease of maintenance and redundancy. By adding generators modularly, sites can install what they need when they need it.
23 January 2020
Our light towers have an aluminum casting which provides heavy duty protection, even during transportation. The new light towers come with the legendary Atlas Copco HardHat canopy as standard. Offering unrivalled tough but lightweight protection in order to maintain the value of the asset even after many years on the road.
30 April 2021
There is nothing more powerful than storytelling, even more if it comes in an entertaining way that brings tough science and technology facts into an understandable reality. The experts in pumps, generators and light towers provide a new view about these products with the Dispelling myths.
21 January 2020
Do you run your own equipment rental company and have to decide on which compressor to take in your fleet? Or perhaps you’re often relying on rental equipment to run your own business and you want to know what to look out for. In both cases, you may not be aware that not all mobile compressors are equally well suited for renting out. Your profitability can also benefit from choosing the right compressor: go for the model that allows you to get most utilization at the best rental rate. These are 7 questions you need to ask before choosing the next compressor for your rental fleet.
20 April 2022
Sustainability is increasingly becoming a major concern in many machine-driven industries, as regulations regarding noise and emissions are growing stricter. There is a need for a technological solution that provides reliable power in silent operation, while reducing fuel consumption and CO2 emissions.
18 January 2022
The HiLight S2+ light tower is a user-friendly solar-powered LED light tower, which enables users to reduce CO2 emissions by up to six tonnes compared with traditional technologies. The innovative S2+ light tower delivers efficient, high performance, giving workers good visibility while allowing sites to increase their sustainability and comply with zero CO2 emission and noise regulations.
19 August 2024
Battery-based Energy Storage Systems used in conjunction with generators have dealt a major blow to the naysayers by combining higher levels of sustainability with more rapid return on investment (ROI) and low Total Cost of Ownership (TCO). A hybrid ESS solution will typically pay initial costs back in no more than two years.
19 August 2024
The most efficient way to store – and deliver – energy coming from renewable sources is through battery-based renewable energy storage systems. The more battery storage for renewable energy that is available the less there will be a need for the conventional power sources of the past.
25 May 2021
Atlas Copco’s ZenergiZe range is a good example of how the high-density li-ion batteries can be leveraged to enable a new level of sustainability, flexibility, and usability, without compromising on power. Due to their modular structure, they are an ideal solution for small businesses requiring a versatile power management, as well large applications with multiple units, where they can revolutionize fleet efficiency.
02 February 2023
A battery energy storage system is a sub-set of energy storage systems, using an electro-chemical solution. In other words, a battery energy storage system is an easy way to capture energy and store it for use later, for instance, to supply power to an off-grid application, or to complement a peak in demand.
14 January 2021
Depending on your region / country; mobile compressors have to comply to several types of regulations. Some examples: emission regulations (for example Stage V in Europe and Tier4Final in US), vessel regulations, road homologation, max sound levels and many more.
14 January 2021
Selecting the right compressor can be cumbersome as there are many factors to consider. A logistic start is your application that determins the required pressure, flow and air quality. But are you also considering your operation and organisation? Number of operators, working sites, utilization rate, required transport and storage can all determin which compressor is the best fit for your need.
12 February 2021
Centrifugal pumps are versatile in their uses. These machines vary considerably in the technology that equips each one for a different set of jobs and circumstances. A careful choice is needed to ensure you optimally achieve your main dewatering objectives. Here are the key considerations to choose the right type of centrifugal pump for your application.
06 May 2021
Through a series of design innovations, Atlas Copco has addressed traditional issues of inaccessible hydraulics and the need to disassemble pumps to perform simple tasks like replacement of consumables. In combination, these features can improve MTTR Mean time to repair up to 30%.
01 August 2023
Head is the height at which a pump can raise fluid up and is measured in metres or feet. We use it when specifying centrifugal pumps because their pumping characteristics tend to be independent of the fluid’s specific gravity, often referred to as relative density.
17 January 2024
The day ends but your productivity remains. In this article, we clarify what you need to know when looking for suitable construction site lighting. You need to consider efficiency, safety and if required, anti-glare lighting and whether your light towers can adapt intelligently to the respective environmental conditions on the construction site.
15 September 2025
In the demanding world of superyacht refits, reliability is everything. For Pendennis Vilanova, Atlas Copco’s portable air compressors are bringing precision, efficiency, and durability - even in the toughest coastal conditions.
03 November 2025
Power Connect provides you split-second access to technical details of your portable compressor, generator, pump or light tower, making it easy to service and maintain your equipment. Thanks to Power Connect, you have full access to machine information. At your fingertips. 24/7.
