Core drills

Safe handheld drilling in reinforced concrete and asphalt up to a diameter of 200 mm.

Contact me

When you need core control

Torque is good but you need control to be safe. Our hydraulic core drills are both safe and powerful.

Safer with torque control

Due to the non-kick back operation, you can drill holes of up to 200 mm in diameter free hand

No sparks

There are no electrical components, which means it´s safe to use the hydraulic core drills indoors

Can be used under water

Our core drills can be used for wet diamond core drilling on the toughest jobs

Easy transport

Our core drills come in a strong steel case for an easy sand safe transport.

Prepared for drill stands

Standard round 60mm front-end makes it fit to the majority of standard drill stands

The jack-of-all-trades in core drilling

Core drills are used by construction professionals in a wide range of applications including building renovation and utility works. They are relied on to install drainage, sewer and water pipes, plus cable and ventilation ducts where large and deep holes are needed. Core sampling in asphalt roads is another perfect application for this high performing drill.

Technical specifications

Model LCD 500 LCD 1500
Weight incl. hoses 9.5 kg (21 lb) 9 kg (20 lb)
Service weight incl. tool (112 mm) 13 kg (29 lb) 13 kg (29 lb)
Length without drill 414 mm (16 in) 406 mm (16 in)
Oil flow 20-30 l/min (5.28-7.93 gpm) 20-30 l/min (5.28-7.93 gpm)
Working pressure 60-120 bar (1,160-2,495 psi) 60-120 bar (1,160-2,495 psi)
Revolutions 600-900 rpm 1,500-2,250 rpm
Drill diameter 50-202 mm (1,968 1/2-7,952 23/32 in) 12-75 mm (15/32-2 15/16 in)
Thread female (drive shaft) *1 1/2" BSP 1/2" BSP
Vibration level 3 axes (ISO 28927-5), 20 lpm *2 3.1 m/s² 2.7 m/s²
Sound pressure level (ISO 11203) *2 <70 Lp, r=1dB(A) <70 LP, r=1 dB(A)
EHTMA class C/D C/D
Part number 1806 1014 38 10806 1014 39

Bits

Diamond core bits (thread 1 1/4 UNC) mm (in) 62 (2 7/16) 82 (3 1/4) 102 (4) 112 (4 3/8) 132 (5 1/4) 152 (6) 162 (6 3/8) 200 (8)
Length mm (in) 450 (18) 450 (18) 450 (18) 450 (18) 450 (18) 450 (18) 450 (18) 450 (18)
Weight kg (lb) 1.7 (3.75) 2.4 (5.3) 3.2 (7.05) 3.7 (8.16) 4.6 (10.14) 6 (13.23) 6.3 (13.9) 9.9 (21.83)
Part number   3378 0050 61 3378 0050 62 3378 0050 63 3378 0050 64 3378 0050 65 3378 0050 66 3378 0050 67 3378 0050 68

Water kit

Water kit with pressure tank    
Water volume l (gal) 10 (2.6)
Size (W+H+D) mm 220*620*250 (9*24*10)
Weight kg 8 (18)
Comments   Water supply for LS cut-off saw and LCD core drill
Part number   3371 8090 02

Your benefits

Our hydraulic core drills are both safe and powerful. They give very low kickback should drill bits jam, so you stay in control. Spark-free operation and perfect fit to standard drill stands .