Our solutions
Atlas Copco Rental
Solutions
Rental Fleet
Atlas Copco Rental
Accessories
Rental Fleet
Nitrogen Generators
Oil-free air compressors
Rental Fleet
Oil-free air compressors
Oil-free air compressors
Oil-lubricated air compressors
Rental Fleet
Oil-lubricated air compressors
Oil-lubricated air compressors
Industries served
Compressors
Solutions
Compressors
Compressors
Products
Compressors
Industrial condensate treatment solutions range
Products
Industrial condensate treatment solutions range
Industrial condensate treatment solutions range
Industrial condensate treatment solutions range
Process gas and air equipment
Compressors
Service
Compressors
Air compressor parts
Maximize your efficiency
Service
Maximize your efficiency
Maximize your efficiency
Maximize your efficiency
Maximize your efficiency
Industrial Tools & Solutions
Solutions
Industries Served
Industrial Tools & Solutions
Aerospace
Industries Served
Aerospace
Aerospace
Aerospace
Aerospace
Foundries & Metal Fabrication
Original equipment manufacturer
Industries Served
Original equipment manufacturer
Original equipment manufacturer
Original equipment manufacturer
Original equipment manufacturer
Industries Served
Industries Served
Products
Industrial Tools & Solutions
Air line accessories
Products
Air line accessories
Air line accessories
Air line accessories
Drilling solutions
Material removal tools
Products
Material removal tools
Material removal tools
Material removal tools
Material removal tools
Material removal tools
Material removal tools
Material removal tools
Material removal tools
Material removal tools
Service
Industrial Tools & Solutions
Atlas Copco service solutions
Service
Atlas Copco service solutions
Atlas Copco service solutions
Atlas Copco service solutions
Power Equipment

Centralised vacuum saves timber engineering specialists 40% in energy consumption

David Smith St Ives Ltd is a leading UK manufacturer of high performance engineered timber products whose output is totally dependent upon an uninterrupted supply of plant air and vacuum. By replacing ageing stand-alone units with a centralised rotary screw VSD vacuum pump system from Atlas Copco’s distributor, Anglian Compressors, production continuity has been assured and 40 per cent savings in energy costs realised.

Reading time: 5 minutes (790 words)

Pick and place application for centralised vacuum system

Established in 1963, the family-owned and managed business occupies a purpose built 165,000 sq. ft. manufacturing plant on the outskirts of St Ives, Cambridge. From there the company utilises modern production techniques together with traditional craftsmanship to produce a range of high quality bespoke staircases, roof trusses, engineered joists, Glulam and door-sets.

The company’s precision manufacturing capabilities enable it to fulfil large commercial orders as well as offer one-off bespoke products for house builders, housing associations and commercial contractors. Product development frequently involves working in both public and private sector projects alongside architects, structural engineers, surveyors, and specialist contractors.

Each product division has its own design team, using the latest CAD software to prepare technical drawings and product specifications. These designs are then programmed directly into specialist machinery to produce each component.

5-axis CNC routers are key production units in the manufacturing process cycle and rely on vacuum to clamp and unclamp work pieces. Before the centralised vacuum system was installed, the company had operated over the past twenty years with a system of eight vane-type vacuum pumps, two feeding each of the four CNC machining centres.
The system of allocating a 5 kW pump and a standby unit at the point of use to each machining centre was not the ideal solution to prevent the risk of downtime, as the company experienced when two pumps broke down in close succession.

The incident was the catalyst that prompted an investigation into the potential advantages offered by deploying a centralised system based on the latest developments in rotary screw vacuum pump technology. Consequently, Peterborough-based Atlas Copco premier distributor, Anglian Compressors, who earlier had supplied the company’s GA air compressor, was called upon for recommendations.

Anglian undertook an air system audit and in-depth investigation into David Smith St Ives’ production processes to see how compressed air and vacuum were utilised; with a view to improving energy efficiency and equipment reliability as well as reducing service costs. Their recommendation was a centralised rotary screw VSD vacuum pump system.

Rotary screw vacuum pumps are based on proven compressor screw technology and provide significantly higher performance levels and reduced maintenance, noise and heat emissions compared to conventional oil-sealed and dry vane vacuum pumps. With the application of variable speed drive, it’s possible to tailor vacuum production to precisely meet process demand, as the new system installed by Anglian Compressors clearly demonstrated.

An Atlas Copco GHS 900 VSD+ 15 kW, oil-sealed rotary screw vacuum pump, that offered a nominal displacement of 870 m3/hr (510 cfm) and an ultimate pressure of 0.35 mbar(a), was installed. This was on the basis that if the promised performance, in terms of load capacity and energy savings, was not achieved during the first month of operation it would be removed without penalty or further commitment.

The GHS VSD+ pump was connected to a new ring main installed by the customer and to all concerned the performance results were impressive. Whereas the former eight stand-alone pumps were each individually demanding 5 kW shaft power 100 per cent of the time, regardless of fluctuating operational demand, the new, complete 15 kW system with VSD was coping at only a 60 per cent load for 97 per cent of the time throughout a 68-hour production week. The net result was a 40 per cent reduction in energy demand.

Simon Wadsworth, director at David Smith St. Ives, was both surprised and delighted with the centralised system’s performance, commenting:

“ To be honest, I was sceptical when Anglian claimed this degree of power savings. I was aware that VSD reduced energy demand as virtually all of our other equipment has had inverter drives fitted for the past ten years, but the GHS now gives us a 40 per cent capacity margin for more demanding applications and the ability to cope with any future expansion opportunities. ”

Simon Wadsworth , Director at David Smith St. Ives

He also welcomed the ability to monitor system performance daily on his desktop computer from the unit’s Elektronikon controller data feedback

As for the redundant standby rotary vane units, they are now linked into the system as back up for critical equipment during scheduled service periods provided under the 5-year Atlas Copco Total Responsibility maintenance contract.

“ Not only have we made a sound investment with payback in terms of reliability, support, and trouble-free productivity, we have also built a great relationship with Atlas Copco and Anglian Compressors. ”

Simon Wadsworth , Director at David Smith St. Ives

GHS VSD+ Pick & place Woodworking 2018 Application story


Learn more about our GHS VSD+ oil-sealed rotary screw vacuum pump

Read more about our industrial vacuum pumps product portfolio