Google Chrome

Mozilla Firefox

Microsoft Edge

Simulator training a 21st century approach

January 19, 2015

With the ever-increasing demands for production efficiency, fast-track training in the mining industry has never been more important. Boliden Tara Mines of Ireland is one company that is reaping the benefit of an effective and safe training method with simulator training, without causing any disturbance to production.

Traditional ‘buddy training’ on a production drill rig can take four to six weeks in order to get a new fully trained operator. In addition, any drilling errors made by a trainee can lead to difficulties during blasting, causing unevenness in the mine’s tunnel walls and floor. Similarly, if there are errors in depth alignment, subsequent rounds will be more difficult to drill and load, and without good profile quality, blast damage is increased, resulting in more time for scaling and rock reinforcement.

At Boliden Tara Mines in Navan, Ireland, Mining Manager Mike Lowther is fully aware of these production efficiency challenges. The mine, owned and operated by Boliden, the Swedish international group, produces approximately 2.5 million tonnes of ore for zinc and lead concentrate per year and strives to constantly improve efficiency wherever possible. Part of this effort included the use of an Atlas Copco Master Driller Simulator. ” Lowther recalls.

"It was a brilliant opportunity not to disrupt production and make rapid progress on our training program in a 21st century environment"

Mike Lowther ,Mine manager Boliden Tara Mines

Realistic experience

Simulator training a 21st century approach

The simulator perfectly replicates the Atlas Copco Boomer development rig and Simba production rig. The cab layout and functionality create an extremely realistic representation of underground mining tunnels in the front and rear windscreen cab positions making simulator training even more realistic. In addition, the Atlas Copco Master Driller Program offered the Tara Mines trainees three levels of certification – Bronze, Silver and Gold.

Pat Potterton, training officer at the time, now Technical Support Supervisor-Mine Development, organized the training and arranged for the simulator to be delivered during the peak summer holiday period to limit the impact on production. Operators were brought in from leave to be trained while production continued underground. When the simulator arrived, initial training was given at the Atlas Copco Service Center in Portlaoise to Potterton, Mine Captain Roy Tallon, and Training Officer Jimmy Dunne,
so that they could familiarize themselves with the simulator before it arrived at the mine.

Read the full story at Mining & Construction online.

Epiroc operated under the trademark “Atlas Copco” prior to January 1, 2018.

2015 Face drill rigs Rock reinforcement Training Mining and Rock Excavation Service division Training products Underground mining Rock bolting rigs International Customer story

Related products and services

Master Driller

Theoretical and practical training for operators on three distinct levels

Simulator training surface

Simulators

Our sophisticated simulators provide a safe and realistic environment to enhance the skills of machine operators

traning products

Back to work with the help of RigScan technology

December 28, 2015

Bolting Mining and Rock Excavation Service division 2015 International Customer story RigScan

When business slows down, drilling contractors may have to lay-up some of their equipment. But when things pick up again, the equipment may no longer be “fit and ready” to take on new assignments. Here’s the best way to find out.

Continue reading

Insight on underground trends

December 15, 2015

2015 International Customer story

Tomorrow’s underground mines will be more remote with orebodies that are difﬁcult to reach and consequently more dangerous to excavate. Against this background, Atlas Copco’s Mattias Pettersson says mining companies have only one option.

Continue reading

New big hole hammer cuts costs

December 13, 2015

2015 International Customer story

Most surface miners agree that bigger blastholes reduces the cost of blasting but also increases the cost of hammers and bits. For example, mines have been switching from 152–171 mm (6–6 ¾ in) holes to 215–250 mm (8 ½–9 in) holes to increase productivity....

Continue reading

Visit our news archive