The production of the closure parts (doors, engine hood, trunk lid, fenders) is a separate process step within the body-in-white production line. One of the most demanding joining operations at this point is the hem flange process.
A standard bead is a preferred solution to gain outstanding strength and stiffness with epoxy-based adhesives in nearly every process step of body-in-white. The adhesive between inner and outer sheets not only fulfills a structural function, it also prevents corrosion, which is especially important in the production of all closure parts.
Swirl technology for hem flange bonding in body-in-white is getting increasing attention. The reason for this attention rise is due to its ability to offer excellent material distribution and a more reliable process window. The handling of a bead application, especially in closures, can become quite difficult when there is complex part geometry. That's why the swirl technology and its flexibility is becoming more and more popular within the automotive industry. Check out the product brochure on our E-Swirl 2 AdX BIW below, and get to know our latest product.
A traditional bead is still the most established application type in hem flange bonding. Its fast and reliable handling is its primary advantage. Sometimes the handling of a bead application can become quite difficult in complex part geometries. Our experts are more then willing to help you to find the right application type, tailored to your needs.
Multidot applications act as dampener and as a protective spacer between the inner and outer parts. Our dosing systems are able to apply up to 36 dots per dosing equipment. The average system layout consists of 8 to 10 dosing tools. If you want to know more about our anti-flutter solutions with multidot applications, don't hesitate to get in touch with us.
When choosing anti-flutter applications for hoods, customers sometimes like to use a multiaxis solution to achieve a similar result as the multidot application. In comparison to the multidot application, the multiaxis application is often used for low volumes with long cycle times. The dosing system is mounted to a special axis and is managed through the adhesive system controller. This is a popular solution because it reduces the cycle time of the robot.