Truck Engine/PTO Water Well drill - DTH, Rotary air, and mud drilling; Pullback capacity 311.4 kN (70,000 lbs); Pulldown capacity 133.4 kN (30,000 lbs)

Contact us

Single engine design

provides lighter weight and quieter operation

Reduced noise and deck congestion

make service and maintenance easier.

Flexible CycloneTM Operating System

allows to tackle both easy and tough jobs

The drill is designed for water well and other applications requiring air or mud rotary and down hole hammer drilling methods. It is suitable for drilling 5 to 12 in (127 to 305 mm) holes but can drill up to 20 in (508 mm) and handle up to 19 in (483 mm) diameter casing. The rig is factory mounted on a Peterbilt 367 truck or an optional International Paystar 5900i.

- Adaptive CycloneTM Operating System allows you to tackle easy or tough jobs with equal confidence
- Electronic air regulation system continuously monitors compressor volume and pressure output for optimum efficiency
- 70,000 lb pullback (31,751 kg) and 37 ft 6 in (11.4 m) tower support deeper applications


  • Deephole Drilling 12.6 MB, PDF
  • TH60_TH60DH Brochure 439.8 kB, PDF
  • TH60DH Cyclone 1.7 MB, PDF
Technical specifications Imperial Metric
Compressor pressure 120 to 350 psi 8.3 to 24.1 bar
Compressor flow 1070 cfm 505 l/s
PTO drive Cummins ISX, 600 Hp @ 1800 RPM Cummins ISX, 447 kW @ 1800 RPM
Pullback 70000 lb 31751 kg 

30000 lb

13608 kg