Chisel paste for hydraulic breakers

Mineral oil-based paste

Contact us

Excellent performance at high temperature

Tailor made for breakers

Less wear

Long tool life

Reduced cost of operation

Atlas Copco Chisel Paste is a specially designed grease used for lubricating the wear bushings of hydraulic breakers. It prevents cold welding in the area of the bushings.

Standard greases (i.e, those used on excavator bearings) are not designed for the high temperatures that result from the friction between the working tool, bushings and retainer bars when the hydraulic breaker is in operation. They liquefy and disappear. Without greasing, the parts involved in the friction will suffer from accelerated wear.

Chisel Paste is a mineral-oil-based paste containing an aluminium content soap and solid lubricants (such as graphite and copper) with excellent release effect and ambient working temperature range from -20°C to 1100°C/(-4°F to 2012°F), suitable for applications both in cold weather and in high temperatures. High metal content acts ball bearing to minimize high-temperature friction between the surfaces in contact, resulting in less wear between the chisel, retainer bars and bushings. As a result, Atlas Copco Chisel Paste reduces the cost of operation by extending the lifetime of the wear parts and reducing the risk of working tool fractures.

Features: Benefits:
Excellent EP (Extreme Pressure) properties and good release effect The solids content (especially the metal content) acts as a ball bearing, resulting in considerably less wear on the bushings and working tools.
Temperature range from -20°C to +1100°C / -4°F to +2012°F You can work with your breaker for long, continuous periods, even in warmer climates, with the chisel paste keeping its protective properties.
Age-resistant composition No need to replace grease cartridges after long idle periods of the breaker. Chisel Paste keeps its protective properties, even when the breaker is used only occasionally.
Atlas Copco Chisel Paste is available in Contilube II and Contilube II Micro cartridges. They can be refilled using grease containers of 15kg and 45kg (33lb and 99lb). Fast and clean change of cartridges with the Contilube II lubrication system when you run out of chisel paste.
Chisel Paste Use
150g / 5.3 oz cartridges for ContiLube II Micro  For automatic lubrication in Atlas Copco breakers fitted with ContiLube II Micro. Refillable.
500g/ 17.6 oz cartridges for ContiLube II For automatic lubrication in Atlas Copco breakers fitted with ContiLube II and manual greasing with a grease gun. Refillable.
400g / 14 oz cartridges For manual greasing with a grease gun in all breakers, including handheld hydraulics, from all brands.