The PAC F66 KD-S 74HP T4F for high-pressure applications, have been designed to reduce downtime and prolong lifespan, saving operational costs.
This centrifugal pump can handle liquids containing solids of up to 3" in size. This makes it particularly well suited to industrial applications, such as water transfer in the oil and gas sector, quarrying and surface mining, construction, and municipal applications.
Even with suction heights of several feet the machine rapidly evacuates the air from the suction pipe and starts to pump. Additionally, thanks to the enclosed impeller, the PAC range is also suitable for pumping liquids with solids in suspension with best possible efficiency.
View and/or Download PAC F66 KD-S 74HP T4F: Datasheet
|Q max eff.||2,010 USgpm|
|Eff. max||79 %|
|Suction port||6" Flange - ANSI class 150|
|Delivery port||6" Flange - ANSI class 150|
|Impeller type||Closed, 2 vane|
|Casing||ASTM A536 ductile iron|
|Impeller||ASTM A536 ductile iron|
|Wear ring||ASTM A48 Class 20 grey iron|
|Wear plate||ASTM A48 Class 20 grey iron|
|Shaft||AISI 630 stainless steel|
|Mechanical Seal faces||Silicon carbide / Silicon carbide / VITON|
|Elastomers||NBR + VITON|
|Check Valve||ASTM A536 ductile iron + NBR rubber flap|
|Vacuum pump type||Diaphragm|
|Nominal air capacity||50 cfm|
|Max vacuum||- 26.6 inHg|
|Model||KDI 2504 TCR|
|Type||Diesel turbo common rail|
|Displacement||2.5 Liter (151 in³)|
|Cooling||Liquid with radiator|
|Max operating speed||1,800 rpm|
|US emissions||EPA Tier 4F|
|Engine system voltage||12 V|
|Engine Power rating||74 HP|
|Automatic operation: start-stop with transducers or floats|
|Material||ASTM A36 steel|
|Coatings||Epoxy powder, average thickness of 3 MIL|
|Features||Lifting beam. Fork lift pockets. Pump access through hinged door. Protected PE fuel tank|
|Battery||Acid charge Pb-Ca maintenance free, 12V - 1,100 CCA|
|Fuel tank capacity||90 USG|
|Fuel consumption||3.5 US Gal/hr @1,800rpm @BEP|
|Dry weight||4,020 lbs|
|Wet weight||4,650 lbs|
|Speed||Impeller Dia.||Style||Solids Dia.||Ns||Suction||Discharge||No. Vanes|
|Various||12" / 315 mm||Closed||3" / 76 mm||1,800 rpm||6" / 150 mm||6" / 150 mm||2|
The 12" impeller with 79% efficiency at B.E.P. provides best pumping result with minimal efforts
Closed impeller type with solids handling capability of 3" for trouble free operation
Hinged cover for direct access to the impeller and pump volute
|Polyethylene Fuel tank
Corrosion-free PE tank provides longer lifetime and avoids tank cleaning due to oxidation
Water transfer refers to the moving of water from a high saturated area to a low saturated area. The PAC H is a centrifugal pump that can handle liquids containing solids of up to 3" in size, which makes it well suited for water transfer in the oil and gas sector, quarrying and surface mining, construction, and municipal applications.
The PAC H pump's design benefits make them well suited for water transfer. These pumps are able to be used often and on jobs where pumps must run continuously.
Water transfer is common in these sectors:
Site dewatering is the process of taking and removing water from construction sites, quarries, mine shafts, or any other area. Extracting water from these areas is crucial to maintain a safe working environment as well as reduce any costly delays.
Due to the PAC's ability to handle pumping high volumes, this pump is able to displace not only water, but sewage, industrial waste, chemicals, and even some solid products.
Areas for site dewatering :
Whether it is a hurricane, flood, natural disaster or sewer line collapse; Atlas Copco PAC F pumps are up to the challenge. The PAC F is a centrifugal pump that can handle liquids containing solids of up to 3" in size, which makes it well suited for any emergency.
Emergency Response is common in these sectors:
Monday - Friday 8:30am - 5:00pm