When assembling a light module, the most challenging part is to achieve a hermetically sealed bond thad avoids internal contamination and condensation. This can be achieved by using a 2C adhesive. At Atlas Copco we have the knowledge and products to prevent your material from unwanted curing, extend your uptime and lower your process costs.
When assembling headlights, the surface must be pre-treated to achieve the best bond. The goal of the bond is to be hermetically sealed, avoiding contamination and condensation inside of the module. 2C adhesive is often used due to a lack of a physical curing option at this stage. When working with a 2C adhesive a controlled material flow is mandatory to prevent unwanted curing.
Our SCA product line offers a flexible metering system, which allows control of the material flow of each component individually and solves this issue. Another challenge when working with 2C is the need to manage temperature, as the curing mechanism and process time are highly affected. Our hybrid peltier technology and our water-cooled hoses ensure stable quality, even in hot climate conditions. We provide you the best service – wherever you are. If you want to know more about our solutions for lighting applications, don’t hesitate to contact one of our experts.