Our solutions
Industrial Tools & Solutions
Solutions
Industries Served
Industrial Tools & Solutions
Products
Industrial Tools & Solutions
Power Technique
Solutions
Products
Power Technique
Energy Storage Systems
Atlas Copco Rental
Solutions
Compressors
Solutions
Products
Compressors
Products and solutions
Solutions
Energy Storage Systems
Products and solutions

Saving deck space and rental costs for offshore maintenance operation

November 30, 2021

  • Customer challenge: to deliver high-pressure compressed air for the decommissioning of offshore multistring wellheads
  • Our solution: revolutionary 35-bar fleet delivers maximum capacity with a minimum of deck space
  • The result: achieving the output previously required by 2 units with just 1, saving on physical footprint and rental costs

State-of-the-art subsea equipment: powered by Atlas Copco Specialty Rental

James Fisher Offshore (JFO) has a worldwide reputation as a specialist in both subsea and topside offshore operations for the oil and gas industry. They often use state-of-the-art, proprietary equipment to carry out complex tasks under extreme conditions. Equipment which typically needs to be connected to equally state-of-the-art compressor units that are capable of delivering high flow rates at high pressure. Preferably without taking up too much valuable space on already cramped offshore vessels and platforms! And that is precisely where Atlas Copco Specialty Rental – and its new fleet of 35-bar rigsafe compressors – come in. 

The pressure is on: an extremely high-performance compressor spread

JFO's ultra-high-pressure abrasive waterjet cutting system offers an innovative method for the internal cutting and removal of subsea tubular structures, ranging from piles and jacket legs through to well casings and well heads. 

 

For the abrasive material to do its job, however, the cutting nozzle needs to be constantly and reliably dewatered, often at extreme pressures deep beneath the surface of the sea. When initially trialing the new equipment, JFO contracted the only provider in the North Sea region capable of supplying a compressor package that’s up to the task: Atlas Copco Specialty Rental. 

Y35 and TwinAir 2800+ offshore application

Raising the bar: the same redundancy with half the physical footprint

When first trialing the new cutting system, JFO rented 2 Atlas Copco Y35 rigsafe compressors fitted inside fully compliant DNV2.7-1 lifting frames. A low-footprint compressor spread that easily achieved the required pressure levels both safely and reliably. But it was around the same time that we launched our ground-breaking TwinAir [SVB1] 2800+ compressors, capable of delivering an impressive 35 bar of gauge pressure and flow rates of up to 2800 cfm, all from a single unit that fits inside a 20 ft DNV container. JFO immediately recognized the benefits and switched to the new technology just as quickly. As a result, they achieved the same output and 100% redundancy from a single package that significantly reduced the required amount of deck space. And anyone familiar with offshore operations will know the value of that particular type of real estate!

Sharpened competitive edge: a highly cost-effective solution

By switching to our revolutionary TwinAir 2800+ compressor, JFO saved more than just deck space. Renting half the number of units also means significantly lower rental, operating, and logistics costs. Which in turn helps JFO sharpen the competitive edge of its market-leading jet cutting technology even further. And since our new fleet of 35-bar compressors deliver more than enough capacity to power topside utilities as well, they ensure that JFO’s services are fully self-sufficient on the client’s rear deck.

JFO’s supervisors were highly satisfied with the compressor’s performance during operations, especially given the output and redundancy achieved from a single 20-foot container. And given the limitations on deck space in offshore activities, we’re certain the TwinAir 2800+’s extremely compact footprint means it will be in high demand for many other customers as well.

Gavin Sulley , Technical Business Support Manager at Atlas Copco Specialty Rental Europe
Y35 and TwinAir 2800+ offshore application

Learn more about how Atlas Copco’s 35-bar compressors can boost the efficiency and cost-effectiveness of your operations

Or contact Atlas Copco Specialty Rental for more detals.

At Atlas Copco, we have been turning industrial ideas into business-critical benefits since 1873. By listening to our customers and knowing their needs, we deliver value and innovate with the future in mind.

Great ideas reinforce sustainable development. At Atlas Copco Specialty Rental, we team up with our customers to set up state-of-the-art temporary air, flow, steam and nitrogen solutions. Our passionate experts have extensive application and equipment knowledge. We understand our customers' needs and can provide a total solution for any industry, no matter if it is for emergencies or planned projects. We are a division of the Power Technique business area, headquartered in Boom, Belgium and offer specialty rental solutions under several brands around the globe.