Atlas Copco launches new large GHS VSD+ pumps capable of halving central vacuum supply energy costs

May 22, 2017

GHS VSD⁺ 3800-5400 industrial vacuum pump

GHS VSD⁺ 3800-5400 vacuum pump

Atlas Copco has extended its range of variable speed driven vacuum pumps with the addition of three models offering flow rates up to 5004 m3/h. The new GHS 3800-5400 VSD+ rotary screw pumps are particularly suited for large industrial vacuum users in the UK’s glass, plastics, canning and food packaging industries. Companies in these sectors stand to reduce their energy consumption by up to 50 per cent if they upgrade their existing centralised vacuum systems or switch from using multiple, decentralised point-of-use pumps to a central vacuum system based on one or two super-efficient GHS VSD+ machines.

Richard Oxley, industrial vacuum pumps

“Atlas Copco has extended its range of variable speed driven vacuum pumps with the addition of three models offering flow rates up to 5004 m3/h. The new GHS 3800-5400 VSD+ rotary screw pumps are particularly suited for large industrial vacuum users in the UK’s glass, plastics, canning and food packaging industries. Companies in these sectors stand to reduce their energy consumption by up to 50 per cent if they upgrade their existing centralised vacuum systems or switch from using multiple, decentralised point-of-use pumps to a central vacuum system based on one or two super-efficient GHS VSD+ machines.

To illustrate this, I recently visited a company in the food packaging industry who we predicted could save in excess of £16,000 a year in energy costs by replacing their existing centralised system with a smaller number of GHS VSD+ pumps. Following this, an independent energy auditor was brought in to verify the results, while the pumps were on trial, who further upgraded the potential savings to the region of £20,000 a year.””

Richard Oxley, Vacuum Product Manager for Atlas Copco, UK
GHS VSD+ 3800-5400 vacuum pump inside

Inside the GHS VSD+ 3800-5400 industrial vacuum pump

GHS VSD+ pumps provide significantly higher performance levels and reduced maintenance, noise and heat emissions compared to conventional oil-sealed and dry vane vacuum pumps. When installed as part of a central vacuum system, theycan be used to precisely tailor vacuum production to meet customers’ demand. All the pumps are equipped with easy-to-use Elektronikon controllers that can be integrated into a process control system and also control other manufacturers’ vacuum pumps. They are also fitted with a Smartlink remote monitoring system and variable speed drive, making them extremely economical to run. Additionally, the pressure set point control function ensures the pumps deliver the lowest possible vacuum flow with which the required vacuum can be maintained. As a result, no excess energy is wasted and life cycle operating expenses are significantly reduced.

“The payback period for a converted system is extremely short. The new units deliver more cubic metre per hour, per kilowatt than any other vacuum pump of comparable capacity.”

Richard Oxley, Vacuum Product Manager for Atlas Copco, UK

Due to the extremely high oil retention capacity of the GHS VSD+, environmental impact at all operating pressures is significantly lower compared to similar sized oil-injected vacuum pumps. The range also now includes a patented oil separator that limits residual oil levels to a maximum of 3 mg/m³. “This means the exhaust air is significantly more environmentally-friendly in comparison to other pumps on the market” Oxley reports.

The cooling system is equipped with an electronic thermostatic valve that accurately controls the oil temperature. Consequently the oil retains its optimum consistency, as any entrainment of water to the oil cycle by condensation is avoided. The cooling system also operates with a speed-controlled fan to minimise energy requirements. The vacuum pumps in the GHS 3800–5400 VSD+ series are available with water or air cooling.

The GHS VSD+ range, which previously offered a maximum flow rate of 1810 m3/h and has now been extended upwards to 5004 m3/h, is specifically designed to reduce maintenance requirements and ensure life-cycle costs are kept low. For instance, there are no rotary vanes to replace and the patented, sturdy screw element does not require maintenance for many years*. In addition, intake filters and oil separators can be replaced without dismantling any piping. Service intervals aregenerally very long and operators can obtain information on any required maintenance work in a quick time by connecting the pump’s integrated Smartlink remote monitoring system to a plant’s communication network.

Atlas Copco supplies GHS VSD+ pumps as part of a plug-and-play system within a single housing. Installation is very quick and simple, saving both time and space. The units have a smaller footprint than other pumps of comparable capacity: Even the largest variant of the GHS VSD+ series (3800-5400) is less than 2 m x 3 m. The models are also considerably quieter than comparable pumps and comply with environmental and energy management systems in accordance with ISO 50001 and 14001.

In addition, the technology enables shorter production cycle times because the pump reacts very quickly to changed process conditions in the pressure range relevant for the user. Meanwhile, the special inlet control valve, which is operated in close liaison with the variable speed drive, allows energy consumption to be minimised further.

Optional energy recovery components can be integrated into the system, allowing users to recover a large amount of the heat that is unavoidably generated by compression without sacrificing pump performance. Atlas Copco reports that recoverable energy levels of about 75 per cent are possible in some applications. Energy recovery also keeps heat release in the vicinity of the units to a minimum. This means that air conditioning systems are not needed for nearby work stations, which is especially important in food packaging environments.

*Maintenance of the screw element is recommended at approx. 48,000 operating hours.

Editor's Notes:


Atlas Copco’s Vacuum Technique business area provides vacuum products, exhaust management systems, valves and related products mainly under the Edwards, Leybold and Atlas Copco brands. The main markets served are semiconductor as well as a variety of industrial segments. The business area has a global service network and innovates for sustainable productivity in order to further improve its customers’ productivity. Principal product development and manufacturing units are located in the United Kingdom, Czech Republic, Germany, South Korea, China and Japan.


Industrial Vacuum is a division within Atlas Copco's Vacuum Technique business area. It develops, manufactures and sells sophisticated vacuum products and solutions for customers in the industrial process and rough vacuum sectors, for example steel, CPI (chemical process industries), metallurgy, petrochemical, food packaging and paper handling. The division markets products under the Atlas Copco, Edwards, Quincy and Leybold brands. The division's focus is to improve customers' productivity. The divisional headquarter is in Cologne Germany, the main production locations are in Cologne, Qingdao and Tianjin China, Lutin Czech, Valence France and Antwerp Belgium. 


Atlas Copco Compressors is the GB sales and service operation of the Atlas Copco Group providing oil-free and oil-injected stationary air compressors,  gas and process compressors, vacuum pumps, turbo expanders, nitrogen generators, air treatment equipment (such as compressed air dryers, coolers, and filters) air management systems, and custom designed engineered packages. 


Atlas Copco Compressors’ sales and distribution network means that specialist compressed air advice and service is always within easy reach. A team of over 80 service engineers operates across the country, to ensure maximum running efficiency and minimum downtime at its customers' sites.


In the United Kingdom, Atlas Copco also handles the sales and marketing of construction and mining equipment, portable compressors and electric power generators, industrial power tools and assembly systems – all backed up by a nationwide sales, distribution, service and maintenance network. 


Atlas Copco is a world-leading provider of sustainable productivity solutions. The Group serves customers with innovative compressors, vacuum solutions and air treatment systems, construction and mining equipment, power tools and assembly systems. Atlas Copco develops products and service focused on productivity, energy efficiency, safety and ergonomics. The company was founded in 1873, is based in Stockholm, Sweden, and has a global reach spanning more than 180 countries. In 2016, Atlas Copco had revenues of BSEK 101 (BEUR 11) and about 45 000 employees. Learn more at www.atlascopco.co.uk/compressorsuk


For all of the latest news follow us on Twitter via @AtlasCopcoUKIRE, connect with us on Facebook and Google+ or find our Atlas Copco UK & Ireland LinkedIn company page.



Telephone number for publication: 0800 181085 E-mail address for publication: compressor.sales@uk.atlascopco.com


GHS VSD+ 2017 Product United Kingdom Industrial Vacuum Oil-sealed rotary screw pumps Energy Efficiency Oil-sealed vacuum pumps Rough Vacuum