PAC Flow series

The pump system consists of a centrifugal pump and a separator, which enables air to be separated from the liquid and be sucked by a vacuum pump - making automatic priming possible. Even with suction heights of several feet the machine rapidly evacuates the air from the suction pipe and starts to pump. The PAC range is also suitable for pumping liquids with solids in suspension with best possible efficiency.

The PAC F88 Atlas Copco pump is designed to withstand toughest applications and delivers best in class pumping efficiency. One of the most common area of utilization is the mining and Oil & Gas segment where reliability, efficiency and versatility is the key to provide a customized solution. Other suitable applications within Construction and General dewatering, Municipal as well as General Industry are ideal for the PAC F88 pump. Atlas Copco pumps are packed with features that not only meet, but exceed the needs of our customers.

View and/or Download PAC F88 E 150HP: Brochure / Datasheet

TECHNICAL DATA

Pump  
Model PAC F88 E 150HP
Qmax 3950 USgpm
Hmax 200 ft
Q max eff. 3100 USgpm
Eff. max 82%
Suction port 8" Flange - 150# ANSI
Delivery port 8" Flange - 150# ANS
Impeller type Closed, 2 vane
Impeller diameter 12"
Solids handling 3"
Material  
Casing ASTM A536 ductile iron
Impeller ASTM A536 ductile iron
Wear Plate ASTM A48 Class 20 grey iron
Shaft ASTM A48 Class 20 grey iron
Mechanical Seal faces Silicon carbide / Silicon carbide / VITON
Elastomers NBR + VITON
Lubrication Grease (bearings)
Check Valve ASTM A536 ductile iron + NBR rubber flap
Separator Aluminium alloy
Priming System  
Vacuum pump  
Vacuum pump type Diaphragm
Nominal air capacity 50 cfm
Max vacuum - 26.6 inHg
Drives Link belt

Engine  
Make Weg
Type Three Phase Induction Motor
Cooling method IC411 - TEFC
No. poles 4
Tension supply 460 V
Frequency 60 Hz
Rated power 150 HP
Rated speed 1,784 rpm
Rated current 116 A
Efficiency class W22 NEMA premium efficiency
Max efficiency 95.4 %
Protection rating IP55
Insulation class F
Thermal protection Thermistors 2 Wires - 311degF
Duty cycle Continuous - S1
Arrangement  
Technical data  
Material ASTM A36 steel
Coatings Epoxy powder, average thickness of 3 MIL
Features Lifting beam. Fork lift pockets. Pump access through hinged door.
Dry weight - lbs

PERFORMANCE CURVES

Speed Impeller Dia. Style Solids Dia. Ns Suction Discharge No. Vanes
Various 12" / 315 mm Closed 3" / 76 mm 2000 rpm 8" / 200 mm 8" / 200 mm 2

flow limits graph

flow limits graph

flow limits graph

BENEFITS

Efficiency
The 12" impeller with 82% efficiency at B.E.P. provides best pumping result with minimal efforts
Solids handling
Closed impeller type with solids handling capability of 3" for trouble free operation
Easy maintenance
Hinged cover for direct access to the impeller and pump volute

Applications & Use Cases

Bypass

Allied Bypass

Water transfer refers to the moving of water from a high saturated area to a low saturated area. The PAC H is a centrifugal pump that can handle liquids containing solids of up to 3" in size, which makes it well suited for water transfer in the oil and gas sector, quarrying and surface mining, construction, and municipal applications.

The PAC H pump's design benefits make them well suited for water transfer. These pumps are able to be used often and on jobs where pumps must run continuously.

Water transfer is common in these sectors:

  • Municipalities
  • Civil Construction
  • Industry

Dewatering

Water transfer in quarry and mine

Site dewatering is the process of taking and removing water from construction sites, quarries, mine shafts, or any other area. Extracting water from these areas is crucial to maintain a safe working environment as well as reduce any costly delays.

Due to the PAC's ability to handle pumping high volumes, this pump is able to displace not only water, but sewage, industrial waste, chemicals, and even some solid products.

Areas for site dewatering :

  • Quarries
  • Construction sites
  • Mine shafts
  • Municipalities

Emergency Response

Emergency Response

Whether it is a hurricane, flood, natural disaster or sewer line collapse; Atlas Copco PAC F pumps are up to the challenge. The PAC F is a centrifugal pump that can handle liquids containing solids of up to 3" in size, which makes it well suited for any emergency.

Emergency Response is common in these sectors:

  • Municipalities
  • Civil construction
  • Industry
  • Mining
  • Oil & Gas