Take a look at our Preventive Maintenance (PM) programs for your Atlas Copco industrial power tools. Your savings will depend on whether you have line assembly or fixed stations, tool types used, and other factors.
PM once a year is usually enough for low intensity production. High intensity production with critical joints requires a customized PM program. We use Reliability Centered Maintenance (RCM) which detects each station’s characteristics, i.e., tool type, torque used, production rate, joint type, etc. Using this data we balance maintenance costs against the operational cost of a failure and create the optimum maintenance program for your production operation. RCM is increasingly used with pneumatic as well as electric tools.
An engine plant with high intensity production evaluated three different maintenance strategies:
Repairs only = 32% tool failures/year
Standard interval PM = 13% tool failures/year
RCM based PM = 2% tool failures/year
Contact us and find out more about the potential savings for your operation or visit our ToolCover Maintenance solutions pages.
Atlas Copco Tools and Assembly Systems LLC
3301 Cross Creek Parkway
Auburn Hills, MI 48326 USA
+1 (248) 373 3000
SCA industrial dispensing systems +1 (248) 377 9722
Atlas Copco Henrob
30000 South Hill Rd
New Hudson, MI 48165 USA
+1 (248) 493 3800
Emergency & Technical Support:
+1 800 4HENROB (800 443 6762)
Contact us for Fabrication and Maintenance tools
Atlas Copco Tools and Assembly Systems
4428 Underwood Rd
LaPorte, TX 77571 USA
+1 (281) 448 5900