The introduction of Stage V has a significant impact on small diesel air compressors. With Atlas Copco's 8 series range, you don't only keep the benefits you are used to. We are even adding new features.
Discover all features of the new Stage V compliant 8 series compressor range
Compact power
The 8 series compressor are not only Stage V compliant, they are also 25% more fuel efficient. And the best part? You keep the benefits you are used to: a full PE hood and back baffle and most models still under 750 kg so you can tow them without the need for a special driver licence.
Enter the digital age
Intelligent controllers ease operation, increase utilization rate and boost energy efficiency. All this compressor data can also be accessed remotely through Fleetlink. All compressors with electronic engines (over 19 kW) have an integrated controller: the easy-to-use Xc1004 or the advanced Xc2003. The last one also enables PACE and ECO-Mode functionalities to consequently boost utilization and energy savings during idling situations.
Easy to use
All standard models under 750 kg for easy transport without a special drivers license, PE protection for increased reliability and resale value, service in under an hour for increased uptime. None of these known and appreciated 8 series benefits have been sacrificed with the introduction of Stage V.
Ready for action
The 8 series compressor is your construction buddy. The integrated generator increases efficiency on site as there is no need to roll in a generator for small power needs. In addition, the 8 series compressors are easy to lift, transport and maneuver, no matter where you need it. The single sheet reinforced frame with C3 certified anti-corrosion paint further protects your investment from the elements.
Ready to unlock the full range?
If you have any more questions, don't hesitate to contact us.
A full range, all stage V compliant
A fully compliant Stage V compressor range
Clean, fuel efficient engines
All the information you need, directly on your phone
Scan the QR code to unlock a wealth of information
• Manufacturing and commissioning date
• Warranty information
• Spare Parts Book in Parts Online, our online interactive spare parts catalogue.
• Coming soon: Instruction Book (Manual)
A two-tooler with the best return on investment
Choose a compressor that can do it all. Our new two-tooler package teams up a XAS 58 (5m³/min) compressor with no less than 2 RTEX 25 pneumatic breakers, a dust collector and, optionally, a light tower powered by the compressor’s built-in generator. That is just one compressor powering almost an entire construction site.
Our iconic HardHat PE hood
Never change a winning horse, especially not if it’s a Reddot award winner. The HardHat’s polyethylene is corrosion-resistant, lightweight, indestructible and good-looking at the same time. The polyethylene canopy gives our compressors their iconic shape, protects the core components and keeps your compressor looking like new, even after a lifetime of heavy duty. Are you a rental company? Then you can make your 8 series blend in by choosing a special color HardHat.
Stage V, new digital controllers, connectivity,... What about those other known features of the 8 series? Of course you have those as well. Stage V is not a compromise.
What is in it for you?
- PE hood and back baffle to protect your investment
- All standard models below 750 kg so you can tow without the need for an additional driver's license
- Spin-on filters for quick service
- Lifting beam tested to take four times the weight of the machine
- Anti air lock system for guaranteed starting
- Three layer anti-corrosion (C3 certified) paint system
- Strong undercarriage made from a single sheet. The frame is also spillage free, as standard
- Starter motor protection system
Easy to tow, quick to demo
Customer testimonials
Integrated compressor used for residual concrete removal from rigs
J. Murphy and Sons Ltd ordered 6 XAS 88 compressors with an integrated generator. They wished to upgrade their compressor fleet with more efficient models and the new 8 series range was a perfect fit. The small footprint, 3 layer anti-corrosion protection (C3) and easy service in under one hour; the XAS 88 packs many features that boost productivity!
Rental company upgrades fleet with XAS 88 compressor
Exclusivas Rodriguez Espinosa SL, a rental company in Spain, selected Atlas Copco’s 8 series compressor range for it’s reliability, serviceability, and unique features like the HardHat canopy. A compressor, packed with extra’s; all under 750 kg.
Related topics
ECO-mode
Choose a compressor that only burns fuel when you need air
Xc1004 - Controller for small compressors
For small compressors (up to 5 m³/min / 180cfm)
Xc2003 - Controller for the versatility range of compressors
For compressors of the versatility range ( 7-16.6 m³/min / 200-600 cfm)
7 questions rental companies should ask before buying a new mobile compressor
Do you run your own equipment rental company and have to decide on which compressor to take in your fleet? Or perhaps you’re often relying on rental equipment to run your own business and you want to know what to look out for. In both cases, you may not be aware that not all mobile compressors are equally well suited for renting out. Your profitability can also benefit from choosing the right compressor: go for the model that allows you to get most utilization at the best rental rate. These are 7 questions you need to ask before choosing the next compressor for your rental fleet.
Full Stage V compliant range
All compressors in this Ready to Go range are fully Stage V compliant
We have the compressor that fits your needs
With 11 different models, we have the solution that best fits your requirements.
Advanced controllers and connectivity
Depending on the model selected, the XC1004 or XC2003 controller will grant you full insight. Easy start / stop, output tailored to your needs, clear error messages and warnings, plan preventive maintenance... and the best? With Fleetlink the same data is also accessible from a distance.
Your configuration
Configure the compressor to your specifications. Do you sometimes need power onsite? Then this integrated generator is perfect for you.
Small yet powerful
4 different connections to a Stage V compressor with an engine below 19 kW? Discover our 2 tooler concept.