5 Things you need to know before selecting your temporary power supply

Follow this check list to optimize your next project

When you require a temporary power supply, you will no doubt find many different possibilities: from a single generator, to power modules working as a power plant in all sizes and configurations. Each of these unique solutions has specific strengths.

The challenge is to select the solution that is the best match for your needs.

Regardless of why you need a temporary power supply (emergency power, maintenance projects, commisioning projectspeakshaving, greenfield development off grid...), every project has unique specifications.  These are crucial to select the best temporary power solution for you.

Follow these 5 steps to prepare your next temporary power project

1. Understand your power demand

It is crucial to know how much your power demand fluctuates over time.  This will largely be determined by the reason you need the temporary power supply.

  • When you need back-up power for a production facility; the power flucuations will most likely be caused by either production shifts or the specific processes in your operations.  These can vary greatly.
  • On the other hand, commisioning projects usually require high varations in power.

Diesel driven power modules are an efficient power source when running at full load.  When your power demand is stable, select the power module that is the best fit for your maximum power requirement.

On the other hand, flucuations will cause a power module to run at partial load; greatly decreasing efficiency of the temporary power solution.  When your power demand varies over time; make sure to check alternative set-ups, such as a hybrid power plant.

2. Available grid power

When your site is connected to the grid; you might only need power at specific times to balance a temporary power shortage or expected power downtime.  Contact a specialist to optimize your available grid and a temporary independent power supply for the most efficient solution.

3. Safety requirements

Any power source can be potentially hazardous.  When installing a temporary power supply, make sure your supplier is well equipped and trained to handle this in a proper way - so you can enjoy a safe supply of power.  Look for ISO certification for official validation.

4. The working site

Consider the location where the temporary power plant needs to be installed. 

  • What is the maximum footprint for the temporary installation?  You supplier should be able to share a detailed plan.  Keep in mind installation and decommissioning also require space.   
  • Access on the site: your operation might be critically protected, requiring high security clearance to access the site.  Some installations require regular maintenance intervals -  meaning more frequent site visits are required.  When access is an issue; ask your supplier for the most optimal solution.
  • Is the site easy to reach?  Whether remote, in rought terrain or even offshore; make sure you select a supplier that can easy and quickly reach your operation.
  • Impact on site: make sure to specify any requirement whether it comes to noise, heat, ... or any other impact the temporary installation might have.

5. Local legislation

Stage V, T4F, zero emission zones, noise restrictions in urban areas... every site has to take into account the local legislations during the project preparation stage.  CO2 emission might be the most obvious restriction; but there are many more eg:

  • Local electric standards on equipment and installations (cablings, earthing, etc,...)
  • Safety
  • CO2 Emissions
  • Noise levels
  • Ground pollution
  • ...

When selecting a temporary power supply, make sure to discuss above with your supplier. They should be able to give you full guidance on all topics.

You might also be interested in

Loading

March 30, 2021

Calculator

Selecting the wrong electrical cable can have grave results: from unexpected downtime to critical situations. Wondering which cable size you need? Click on the link below to access the calculator and find out which cable is the best to connect your...

3D visualization of the Atlas Copco Rental cable calculator

5 Things you need to know before selecting your temporary power supply

explainer icon