Contact

Atlas Copco worldwide

Atlas Copco Belgique - Compresseurs

High pressure Boil Off Gas (BOG) Compressor

Experience over 98% reliability and availability with six stages of compression mounted on a single gearbox and skid. Atlas Copco Gas and Process' longstanding experience in integrally-geared technology can now offer lower CAPEX and OPEX costs in high pressure BOG applications.

Contactez nos experts en compresseurs centrifuges

Le saviez-vous ?

The Atlas Copco Gas and Process high pressure BOG compressor is the first integrally geared machine that combines both cryogenic and warm stages on a single gearbox and skid, combining the compression power of two machines.

New HPBOG image for web

Compresseur avec réducteur intégré

En tant que conception la plus efficace et la plus compacte sur le marché, la technologie de réducteur intégré offre une capacité de régime variable pour que chaque étage de compression fonctionne à vitesse optimale, offrant ainsi le meilleur rendement possible.

Dry gas seals

Utilizing dry gas seals on each stage - A technology pioneered by Atlas Copco Gas and Process - enables the BOG compressor to achieve over 98% reliability while reducing the amount of methane emitted into the environment.

Lower CAPEX and OPEX

By mounting all six stages on a single bull gear, the BOG compressor offers lower CAPEX and OPEX costs versus conventional BOG handling technologies.

Adapting integrally-geared technology to high pressure BOG applications

Atlas Copco Gas and Process has over 50 years of experience designing integrally-geared compressors (IGC) for the LNG market. Using our experience in low pressure BOG handling and fuel gas boosting, we were able to apply IGC technology to high pressure BOG handling.

Compared to traditional high pressure BOG technology, the inherent design of an IGC offers significant CAPEX and OPEX savings. CAPEX costs are reduced due to the BOG compressor mounting six process stages – both cryogenic and warm – on a single gearbox and skid. This reduces size and the need for multiple machines to manage your process.

OPEX reductions are the result of the inherent efficiency of the IGC design. Sharing a single bull gear, each stage is custom-engineered to run at the proper speed. This, along with precisely designed impellers maximize efficiency to keep your operating costs manageable.

With more than 8,000 integrally-geared reference units globally, we used our experience in the low pressure BOG and fuel gas boosting applications to adapt dry gas seals (DGS) on each stage of the high pressure BOG unit. DGS – a technology pioneered by Atlas Copco Gas and Process - offer the lowest seal leakage rates in the industry. This leads to a more efficient process and less methane emitted into the environment.

Caractéristiques techniques du produit

Métriques
Impériales

Données de performance

Plage de débit d'entrée réelle	250 m³/h - 500 000 m³/h 147,25 cfm - 294 288,89 cfm
Pression de décharge maximum	205 bar(a) 2 973,27 psia
Pression d'aspiration maximum	0,98 bar(a) 20,31 psia
Puissance requise CH	45 000 HP
Types de joint	labyrinth, carbon ring, dry-gas seal
Étapes (min./max.)	1 - 8
Température d'aspiration	-165 °C - 400 °C 32 °F - 32 °F

Driving Centrifugal Compressor Technology 5.2 MB, PDF
Protect Your Productivity w/ Aftermarket Services 5.5 MB, PDF
Maximizing Flexilbity for Small Scale LNG 7.9 MB, PDF
Maximizing Reliability for Large Scale LNG 4.9 MB, PDF

Supporting the entire LNG value stream

Compressors, expanders, and Companders to suit your LNG process needs

high pressure CO2 compressor

Compresseur centrifuge série GT

pression de décharge jusqu'à 205 bar (a), débit d'air jusqu'à 500 000 m3/h

Compresseur à détendeur et réducteur intégré Compander (TM)

Compresseur-extenseur offrent une puissance nominale jusqu'à 30 MW

Rendering of Oil Free Gas Screw

Compresseur de gaz à vis série GZ

Le compresseur de gaz à vis série GZ offre un débit jusqu'à 9 000 Nm3/h et des pressions jusqu'à 26 bar (a).

OLYMPUS DIGITAL CAMERA

Compresseur à détendeur pour les hydrocarbures et la pétrochimie

températures d'entrée entre -220 et +220 °C, pression d'aspiration jusqu'à 200 bar (a)

Services après-vente

En savoir plus sur nos solutions de service globales 24 h/24 et 7 j/7.

Conformité API

Découvrez comment Atlas Copco répond aux exigences rigoureuses de l'American Petroleum Institute (API) et d'autres normes.

The Gas and Process division of Atlas Copco requires additional legal and data disclosures due to local GDPR laws. To view these division-specific policies, please follow these links for more information: Legal Notice - Data Privacy - Cookie Policy

High pressure Boil Off Gas (BOG) Compressor