New tool technology reduces maintenance manpower by hundreds of hours - Atlas Copco Indonesia
Atlas Copco Indonesia - Alat & Solusi Rakitan
Solusi kami
Alat & Solusi Rakitan
Solusi
Power Technique
Solusi
Kompresor
Solusi
Produk dan solusi
Solusi
Bor
Produk dan solusi
Pembangkit tenaga listrik

New tool technology reduces maintenance manpower by 384 hours

Tiers manufacturing plant in the Midwest running two production lines with an output of 88 units per hour.

Download case study

CHALLENGE
CHALLENGE
Our customer struggled with ongoing competitor tool failure. Their maintenance team found themselves completely disassembling and cleaning tools every week – 12 times more frequent than required by applications with similar output.

Approximately 8 hours of maintenance personnel time was required to swap out, disassemble, clean, reassemble, calibrate and replace each tool.
 
Our customer struggled with ongoing competitor tool failure. Their maintenance team found themselves completely disassembling and cleaning tools every week – 12 times more frequent than required by applications with similar output.

Approximately 8 hours of maintenance personnel time was required to swap out, disassemble, clean, reassemble, calibrate and replace each tool.
SOLUTION
SOLUTION
The current tools were replaced with Atlas Copco Tensor STR series tools, to prevent grease from penetrating the tool.
 
The current tools were replaced with Atlas Copco Tensor STR series tools, to prevent grease from penetrating the tool.
IMPACT
IMPACT
Once an Atlas Copco solution was implemented, tool failures and manpower were reduced. Download the case study for more information.
 
Once an Atlas Copco solution was implemented, tool failures and manpower were reduced. Download the case study for more information.
ANNUAL SAVINGS
$48,786
ANNUAL SAVINGS
$48,786
 
Download case study
Download case study
Click here for more information
 
Click here for more information