Henrob self-pierce rivet setting solution for high volume production
Used for high volume production in automated environments, this self-pierce rivet setting system offers a reliable, robust, and cost-effective method of automatically feeding fasteners. The tape feed system offers the fastest method of feeding rivets to a rivet setter: total cycle time of setting a rivet and feeding the next rivet into position can be as little as 1.2 seconds, compared with 3 to 4 seconds for conventional blow feed systems. These systems are ideal for body-in-white production including car body frames, pillars, enclosures such as doors and hoods, and for add-ons including sunroofs.
Henrob self-pierce rivet setter with tape feed
Tape feed self-piercing rivet setter - may be mounted on a robot or stationary pedestal
Features Servo riveting technology
Real-time process monitoring
Super-fast cycle times
100% duty cycle
High technical availability
Options Data-driven service functionality
Die camera inspection
Tool changing functionality
Poka-yoke rivet supply
Suitable for standard system layouts and multi-communication protocols, the control panel offers a solution that fits your production line.
The control panel includes a touch screen HMI, process monitoring, system diagnosis and maintenance scheduling to keep your processes running smoothly.
Energy reclamation option available
Optional capacitor module recovers electrical energy during the riveting cycle.
Data-driven services (DDS) optimize processes by tracing riveted joints with data-logging and system diagnostics providing detailed performance data on your production line aiding in maintenance resource allocation. System back-up allows rapid upload of system data to support emergencies.
Monitor up to 20 control panels
Cardboard or plastic recyclable rivet spools hold 4,000 to 10,000 rivets depending on rivet size.
Optional poka-yoke solutionwhere the center hub is configured with a mechanical key to prevent incorrect rivets from being loaded to a tool.
Re-usable plastic spools are available for applications where a return loop permits economic recycling and refill.
Poka-yoke and re-usable spool options
Henrob Die Check Camera
The Die Check Camera gives you the ability to confirm viability of dies vital to your joining process. Used between cycles, this 0.5sec check gives you assurance the die will be secure the next time you use the setting equipment. The camera can be mounted on the fill station or be on an independent stand.
Check die conditions during riveting process
Eliminates concern of using worn dies to ensure quality joint