Korzystasz z przeglądarki, której już nie obsługujemy. Naszą witrynę internetową można wyświetlić w jednej z następujących przeglądarek.
The DKR 36R is small enough to fit in a (very deep) pocket and strong enough to do both chipping and drilling.
The DKR 36R is tiny, but it handles anything from cracking rocks to chipping brickwork.
We take care of it for you. The DKR 36 has a built-in lubricator that lasts for a whole shift.
The quick release helps you change between drilling and chipping in seconds.
The quick-release chuck is a money saver. It helps you change between drilling and chipping operations and you can do more work in shorter time. Lubrication is especially important to think about when you are drilling. With the DKR 36R you can concentrate on the task at hand. A built-in lubricator lasts a whole normal shift and helps keep the drill chipper and tools in shape. There is almost always a use for it, and the weight helps you work in almost impossible positions. You can go overhead or under water. Divers especially like this model because they can do so much with it – anything from underwater drilling to chipping – thanks to low feed force.
Typ młotka |
Standard |
Wersja młotka |
silenced |
Masa |
4,5 kg 9,92 lb |
Długość |
375 mm 14,8 inch |
Zapotrzebowanie na powietrze |
10 l/s 21 cfm |
Częstotliwość udaru |
2 820 blows/min |
Poziom drgań, 3 osie (ISO 28927-10) |
20,2 m/s² |
Gwarantowany poziom mocy akustycznej (2000/14/WE) |
103 dB(A) |
Poziom ciśnienia akustycznego (ISO 11203) |
88 Lp. dB(A) |
Ustalacz narzędzia |
cap |
Rozmiar uchwytu sześciokątnego |
Round 19 x 95 mm - Round 3⁄4 x 33⁄4 inch |
Okrągły 19 x 95 mm — okrągły 3⁄4 x 33⁄4 cala |
8463 0103 50 |