Pulsor C, Electronic Oil Pulse Tool, Torque controlled Pulse tool, Transducerised Pulse tool,
Pulsor C counts the tightenings and signals “Batch OK”
Pulsor C ensures the screw has been tightened correctly
Pulsor C signals “NOK” if the wrong screw or part is used
• Lower mean shift
Get the same high torque accuracy in both soft and hard joints.
• Automatic shut-off
Electronics control the tightening process and shut off the tool when target torque is reached. The system can control torque while monitoring angle, number of pulses, rundown and tightening times, plus rundown and pulsing pressures.
• Direct feedback to operator in the form of green, yellow and red LED’s on back of tool.
The system reports all tightening values including torque, angle, pressures, times and number of pulses.
• Air-hose test
Ensures consistent tool performance by checking delay from Tool Control Box to tool, compensating for different hose lengths at start-up.
• Tool drift alarm
Continually monitors torque and pulsing frequency to alert operators before low oil volume can affect results.
• Compatible with Atlas Copco’s QIF products (Quality Integrated Fastening) such as stack lights, socket selectors, scanners, ComNode, ToolsNet 3000/4000 and more.
• Easy set-up
The tool is very easy to set-up in just five simple steps.
• Multiple P-set
One tool can perform up to 100 different P-sets. The right torque setting is selected by exchanging sockets, scanning bar-codes and more.
• High-speed tightening
Atlas Copco pulse tools are fast and powerful helping to boost productivity.
• Fast in soft joints
Pulsor C can run at higher air pressure when working in soft joints to give you faster tightening times.
The tool offers an excellent power-to-weight ratio.
• Hot swap
You can change the tool or cable without shutting the system down because the tool shut-off is located in the Tool Control Box instead of the tool. No new settings in tool is needed.
• Wide torque range
Since pressure is automatically adapted to each and every application, you can use Pulsor C in a wide range of applications.
At Atlas Copco Industrial Technique we create value for our customers with world-class innovative technologies and solutions for manufacturing. Products built to last, long-term thinking, ergonomics and quality – a responsible company working for a sustainable future.
Easily handle your Atlas Copco orders and errands whenever it suits you. Note this is only for registered partners, please contact us to know more.