Secoroc hammers are purpose-matched for all rock types and applications. Choosing the right hammer is largely determined by hole size and type of rock formation. Ideally, the size of the hammer should match the required hole dimension as closely as possible, leaving just enough space for cuttings to evacuate the hole.
Atlas Copco Rock Drilling Tools has a comprehensive range of DTH drill bits to match all conceivable applications. Each bit is made from quality alloy steel, and has been precision machined to produce a perfect body, heat treated to the required hardness, given surface compression for fatigue resistance, and fitted with precision buttons manufactured in-house
Fluids sometimes need to be injected to clean a drilled hole, and until Hydrocyclone technology, drilling speeds were compromised as fluids were injected. Atlas Copco Secoroc’s exclusive, patented system expels injected fluids just above the down-hole drill. The result? As much fluid as necessary can be injected without concern for loss of performance. The hole stays clean, and the hammer runs as if it were operating dry.
Over-the-hammer Jet Subs allow large volumes of air to be bypassed above the hammer. This feature reduces operating pressure and allows more hole cleaning for deep, wet or soft rock applications. The jet sub prevents power losses normally associated with air bypass. Upward facing venturis allow extremely high volumes of bypass flow to escape behind the hammer. Does not require booster compressors.