Våra lösningar
Atlas Copco Rental
Solutions
Uthyrningspark
Atlas Copco Rental
Kvävgasgeneratorer
Uthyrningspark
Oljefria luftkompressorer
Uthyrningspark
Oljefria luftkompressorer
Oljefria luftkompressorer
Oljesmorda luftkompressorer
Uthyrningspark
Oljesmorda luftkompressorer
Oljesmorda luftkompressorer
Tillbehör
Betjänade branscher
Atlas Copco Rental
Betjänade branscher
Betjänade branscher
Betjänade branscher
Industriverktyg och monteringssystem
Solutions
Industrier
Industriverktyg och monteringssystem
Flygindustri
Industrier
Flygindustri
Flygindustri
Flygindustri
Flygindustri
Flygindustri
Tung utrustning och maskiner
Industrier
Produkter
Industriverktyg och monteringssystem
Bearbetande verktyg
Produkter
Bearbetande verktyg
Bearbetande verktyg
Bearbetande verktyg
Bearbetande verktyg
Bearbetande verktyg
Borrningslösningar
Tryckluftstillbehör
Produkter
Tryckluftstillbehör
Tryckluftstillbehör
Tryckluftstillbehör
Service
Industriverktyg och monteringssystem
Atlas Copcos servicelösningar
Service
Atlas Copcos servicelösningar
Atlas Copcos servicelösningar
Atlas Copcos servicelösningar
Kompressorteknik
Solutions
Produkter
Kompressorteknik
Process Gas and Air Equipment
Sortiment för industriella kondensatbehandlinglösningar
Produkter
Sortiment för industriella kondensatbehandlinglösningar
Sortiment för industriella kondensatbehandlinglösningar
Sortiment för industriella kondensatbehandlinglösningar
Sortiment för industriella kondensatbehandlinglösningar
Reservdelar och service
Kompressorteknik

Atlas Copco completes its portfolio of WEDA submersible dewatering pumps

Contact us

WEDA range

29 jan 2019

Atlas Copco Power and Flow has completed its portfolio of WEDA electric submersible dewatering pumps. They have achieved this comprehensive coverage by completing the ranges for drainage and sludge applications and adding a completely new range for slurry applications. Selection from the entire, expanded range is simplified as all models are classified by application and type of fluid that they handle.

The range now comprises three families; the expanded WEDA D for dewatering, WEDA S – also expanded - for sludge, and the entirely new WEDA L slurry family. WEDA D pumps handle either clean or dirty water, even with small solids. The WEDA S range supports dewatering of liquid sludge containing larger solids. The WEDA L products are the toughest, and have the largest apertures to facilitate handling of slurry with the most challenging solids.

Electric dewatering submersible pump WEDA portfolio

The WEDA D family expansion is marked by the D80, a new model for dewatering. S30, and S60, as the new models for the WEDA S sludge family, can handle thick, soft, wet mud or other similarly viscous mixtures of liquids and solids, especially the product of an industrial or refining process. The completely new WEDA L family handles semi-liquid slurry mixtures, typically of fine particles of manure, cement or coal, and water.

Aside from optimising their performance, a lot of focus has been given to make the pumps lighter, enhance electrical safety, improve the seal design and ease installation. All pumps in the D and S range are available with WEDA+ features, which include phase failure protection, rotation control, thermal switches and a 20 m cable with phase shifter plug for all 3 phase pumps. The WEDA+ features are also available as an option on the L range.

Overall, the WEDA D pumps, which use top-discharge, can handle water of specific gravity to 1100kg/m3, and, depending on model, solids of 4 – 12mm diameter. The bottom side discharging WEDA S pumps’ capabilities extend to water with specific gravity to 1400kg/m3, and solids of 25 – 50mm, depending on model. The WEDA L pumps, which also use bottom side discharge, handle water of specific gravity up to 1700kg/m3, and, depending on model, solids of 20 – 60mm diameter.

The pumps’ specifications equip them well for an extensive range of dewatering applications; they provide the performance, reliability and ease of use and maintenance essential to users across multiple industries. All models feature a built-in starter and motor protection system along with optional automatic level control. Adjustable wear-resistant rubber diffusors and hardened high-chrome impellers ensure durability in tough environments.

“ The WEDA pumps can handle flow rates of up to 16,500l/min, with power ratings up to 54kW,.Accordingly, they make ideal dewatering solutions across many, diverse applications within the construction, industrial, emergency and maintenance sectors. Now, our ubiquitous coverage has been highlighted by these latest additions to the range, as they make our portfolio complete. ”

explains Hrishi Kulkarni, Product Manager , Atlas Copco Power and Flow division.

Handling and transportation are considerably eased by the pumps’ weight, which is 20 per cent lower than competitor products; an advantage which makes them especially attractive for rental use. Ease of operation is carefully balanced with high performance, with some models’ ability to pass solids of up to 2” through the pump. An improved aluminium alloy provides higher corrosion resistance over all applications, while reinforced cable entries assure higher resistance to water leakage.

Uptime is maximized through several measures. All pumps have seal types appropriate to their size, and an external plug for grease filling or an oil inspection plug for easy maintenance. With many connection options and sizes, discharge connections are adjustable, with flow direction changeable from 90-180 degrees.

WEDA pump users are supported by a wide network of dealers and service technicians, and readily-available parts.