Giải pháp của chúng tôi
Các giải pháp và công cụ công nghiệp
Các giải pháp
Power Equipment
Các giải pháp
Power Equipment
Energy Storage Systems
Light construction and demolition equipment
Máy nén khí
Các giải pháp
Sản phẩm
Máy nén khí
Process gas and air equipment
Sản phẩm và giải pháp
Các giải pháp
Máy tạo khí
Máy nén khí trong hàng hải
Máy nén khí không dầu và máy tăng áp ni-tơ
Dịch vụ kỹ thuật bơm chân không
Sản phẩm và giải pháp
Dịch vụ bảo dưỡng

The DrillAir range

20-45 m³/min / 706-1589 cfm (12-35 bar / 16-612 psi)

Contact us

Save fuel when drilling

What is the impact on fuel consumption of drilling under 35 bar, compared to a gradual pressure buildup? We did the test, and found that drilling under 35 bar results in getting the job done faster, and a lower total fuel consumption.



How deep you can drill per day with Drillair Y35


Additional flow when flushing and during stem refills thanks to Dynamic Flow Boost. That means faster flushing and refilling and a shorter time to finish the drill job.


Just one truck can carry your compressor and drill rig, that's how compact our compressors are.

Single Truck

A single truck can carry both the compressor and the rig thanks to the short 4.1 meter frame.

Three Layer Protection

To keep the canopy in good condition for a longer period of time, we use three layers of protection: zincor, primer and powder

Cost per Meter

Drilling with 30-35 bar pressure allows you to drill more meters in an hour. with a lower overall cost per meter

A dedicated solution for drilling

At Atlas Copco, we know the drill when it comes to compressed air, whatever the flow or pressure. A DrillAir compressor offers the perfect harmony between pressure and flow and puts you in full control of these parameters, while saving fuel. Read more about the Xc4004, our most advanced controller.

Four reasons to invest in DrillAir:
1. Drilling 500 meters per day is achievable with the DrillAir Y35. Two 4.5” geothermal wells can be finished in a single drilling day.
2. A single truck can carry both the compressor and the rig thanks to the short, 4.1 meter compressor frame.
3. DrillAir is suitable for sustainable projects, thanks to compliance with Stage V emission standards.
4. DrillAir Y35 consumes less than 2.2 liters of fuel per meter drilled. (depending on various operational parameters)

Which DrillAir compressor is best for the job?

Thanks to AirXpert 2.0, you can run your DrillAir at various flow and pressure settings. To choose the best DrillAir unit, just consider your core business to enjoy the best possible efficiency, while knowing it will tackle those additional applications too.

DrillAir selection chart

Download the brochure

Product variations

DrillAir Y35; DrillAir V39; DrillAir X28; DrillAir V28; DrillAir H32; DrillAir V21; DrillAir H23.

The ultimate addition to your fleet


DrillAir Y35.

We made it cleaner and smaller. And it makes you drill faster.

Learn more about our DrillAir solutions


A customer experience

We sent out a new DrillAir Y35 for a field test in Sweden. In this movie we captured the testimonial of the drilling company owner.


DrillAir dynamic flow boost


Save fuel when drilling