Giải pháp của chúng tôi
Industrial Tools & Solutions
Solutions
Industries Served
Industrial Tools & Solutions
Aerospace
Industries Served
Aerospace
Aerospace
Aerospace
Aerospace
Foundries & Metal Fabrication
Original equipment manufacturer
Industries Served
Original equipment manufacturer
Original equipment manufacturer
Original equipment manufacturer
Original equipment manufacturer
Industries Served
Industries Served
Products
Industrial Tools & Solutions
Air Line Infrastructure
Products
Air Line Infrastructure
Air Line Infrastructure
Air Line Infrastructure
Hoists & Trolleys
Products
Hoists & Trolleys
Hoists & Trolleys
Material removal tools
Products
Material removal tools
Material removal tools
Material removal tools
Material removal tools
Material removal tools
Material removal tools
Service
Industrial Tools & Solutions
Atlas Copco service solutions
Service
Atlas Copco service solutions
Atlas Copco service solutions
Atlas Copco service solutions
Learn from our experts
Máy nén khí
Solutions
Sản phẩm
Máy nén khí
Các giải pháp xử lý ngưng tụ trong ngành công nghiệp
Sản phẩm
Các giải pháp xử lý ngưng tụ trong ngành công nghiệp
Các giải pháp xử lý ngưng tụ trong ngành công nghiệp
Các giải pháp xử lý ngưng tụ trong ngành công nghiệp
Các giải pháp xử lý ngưng tụ trong ngành công nghiệp
Process Gas and Air Equipment
Phụ tùng và dịch vụ bảo dưỡng
Máy nén khí
Gói dịch vụ bảo dưỡng
Phụ tùng và dịch vụ bảo dưỡng
Gói dịch vụ bảo dưỡng
Gói dịch vụ bảo dưỡng
Phụ tùng máy nén khí
Tối đa hiệu suất
Phụ tùng và dịch vụ bảo dưỡng
Tối đa hiệu suất
Tối đa hiệu suất

Bolt Tightening Solutions news

Although designing and manufacturing ‘tall’ Tentec tensioners for these applications, is not usually a problem, in this case, the manway cover was located in the vertical plane where the minimum distance between the end of the stud bolt and a walled obstruction was just 100mm.

Hydraulic bolt tensioners for this application would normally comprise a number of ringed segments, each containing an equal amount of load chambers. The chambers are linked internally in each segment so that hydraulic pressure introduced into a single port via hose pressurises each chamber simultaneously. Multiple hoses from the hydraulic power pack mean that all segments are pressurised at the same time and so tensioning all stud bolts simultaneously and with equal force.

However, due to the orientation of the cover and the access limitation, it was apparent that assembly of a segmented ring would be difficult. The engineers at Atlas Copco Bolt Tightening Solutions devised an unconventional solution - the tensioner was designed as a complete ring instead of individual segments.

In the final design, the tensioner was made of 3 rings, each less than 100mm tall and individually lowered by hoist, through the 100mm space and onto the manway cover. All 20 chambers were internally linked and although, theoretically, may be pressurised via a single hose from the power pack, the ring contained 5 ports, equally spaced radially so that fluid supply was evenly and efficiently supplied to all chambers.

Speaking about this innovative solution, Dave Evans, Engineering Manager commented: “We have been dealing with the nuclear industry for many years and have never encountered a similar problem. However, our engineers have plenty of experience designing customised solutions throughout the range of industries in which we work and applied their extensive bolt tensioning knowledge to design this innovative and unique MST.”

Hydraulic tools